
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Series 200 +5 Degree Die-Cast Adapter gives you a die-cast, nickel plated, corrosion resistant hinge spacer that shifts the door angle without changing the cabinet layout, so you can fine tune reveals and alignment on demanding jobs. The adapter offers variable positioning that allows for virtually infinite angle applications, letting you dial in the exact opening or closing correction needed rather than working in coarse steps. Angle possibilities from minus 7.5 degrees to plus 7.5 degrees let you correct doors that lean in or out, which helps bring face frames and frameless runs back into plane. The hinge affixes to the plate by sliding the hinge onto the plate and then tightening the pre mounted screw on the plate, so you get a repeatable connection that supports consistent setups across multiple doors.
The 5 degree angle wedge for mounting plate is built around standard 32mm hole centers, which ties directly into typical European-style cabinet drilling jigs and CNC programs for predictable mounting. Height adjustment of plus or minus 2 mm by slotted holes lets you slightly shift the hinge plate position after mounting, giving you room to equalize gaps or resolve minor sag without redrilling. The hinge affixes to the plate by sliding the hinge onto the plate and then tightening the pre mounted screw on the plate, so the installer gets a controlled clamping action that helps hold the adjusted position. Variable positioning allows for virtually infinite angle applications, which gives you flexibility to tune each door based on its actual fit against the case.
This hinge spacer and wedge sits between the cabinet and the hinge mounting plate as a 5 degree angle wedge for mounting plate applications, so it becomes part of the hinge stack that controls the door position. It is designed for hinge series 100, 200, 400, 600, 900, F, universal hinges, and Silentia, which means it serves across a wide group of Salice hinge families in the same shop. Variable positioning allows for virtually infinite angle applications, letting you address doors that bind on adjacent fronts, display frames that need a slight kick, or runs that drift out of alignment over several cabinets. Angle possibilities from minus 7.5 degrees to plus 7.5 degrees let you handle both inward and outward corrections with the same adapter, so a single part covers different case conditions. The 5 degree geometry and standard 32mm hole centers work within familiar hinge layouts, so it fits into existing cabinet drilling standards in woodworking operations.
The hinge affixes to plate by sliding hinge onto plate and then tightening the pre mounted screw on plate, which helps produce a consistent clamp across installs and supports repeatable adjustments when you are working door by door along a bank of cabinets. Height adjustment of plus or minus 2 mm by slotted holes helps installers trim reveals without pulling the entire plate, which cuts rework time when doors show minor height variation. Die-cast, nickel plated, corrosion resistant construction gives a rigid and stable adapter body that maintains the set angle under normal cabinet use, which supports long term alignment. The standard 32mm hole centers align this variable angle hinge adapter with common line-boring and system hardware, allowing shops to keep the same drilling patterns while still gaining the angle flexibility. A lifetime warranty supports ongoing use in production or field service, so the part can become a standard solution for repeated hinge angle corrections on future projects.
The Series 200 +5 Degree Die-Cast Adapter is for hinge series 100, 200, 400, 600, 900, F, universal hinges, and Silentia, so it serves across multiple Salice hinge lines using the same adapter body.
The Salice hinge adapter offers angle possibilities from minus 7.5 degrees to plus 7.5 degrees, which lets you correct door lean in either direction to bring faces and gaps back into alignment.
The hinge spacer uses slotted holes to give height adjustment of plus or minus 2 mm, letting you nudge the hinge plate up or down to fine tune reveals along the top and bottom edges.
The adapter is built with standard 32mm hole centers, so it aligns with typical European-style line-bored cabinet systems and fits standard drilling jigs or CNC patterns.
The hinge affixes to the plate by sliding the hinge onto the plate and then tightening the pre mounted screw on the plate, creating a secure connection that holds the set angle.
The 5 degree angle wedge is die-cast and nickel plated with corrosion resistant properties, providing a durable mounting interface that supports consistent hinge performance in cabinet environments.
The Series 200 +5 Degree Die-Cast Adapter from Salice America combines variable positioning with angle possibilities from minus 7.5 degrees to plus 7.5 degrees, giving shops a single hinge spacer and wedge that handles diverse alignment challenges. Standard 32mm hole centers and height adjustment of plus or minus 2 mm by slotted holes support clean integration into existing cabinet drilling workflows. For work involving hinge series 100, 200, 400, 600, 900, F, universal hinges, and Silentia, this 5 degree angle wedge for mounting plate provides a consistent path to tighter reveals and more controlled door positioning.
Sold In: 300 Each