Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Series 200 10 degree die cast adapter from Salice America is a hinge spacer and wedge designed to create angled mounting for cabinet hinges. This adapter provides 10 degree angular geometry at the mounting plate, so the hinge position can be set to suit angled door applications in cabinet work. The part is die-cast and nickel plated, giving the hinge plate interface a corrosion resistant surface that holds up in typical shop and jobsite environments where moisture or handling could otherwise mark bare metal. As part of the Salice hinge system, this adapter is built as a dedicated mounting component, so installers can set angle, secure the hinge, and move on without fabricating custom wedges or shims on site.
The adapter uses a screw-on mounting method, so it fastens to the cabinet with standard screw attachment through its plate. Variable positioning within the minus 7.5 degree to plus 7.5 degree angle range lets installers set the hinge line to match the cabinet geometry before locking it down, which helps when fitting doors to angled end panels or specialty cases. Height adjustment of plus or minus 2 mm through slotted holes allows small vertical shifts of the plate, supporting precise reveals across a run of doors. The hinge affixes to the plate by sliding the hinge onto the plate and then tightening the pre mounted screw on the plate, which gives a secure connection while keeping the mounting workflow straightforward for repetitive installations.
This Salice hinge spacer and wedge is designed for use with hinge series 100, 200, 400, 600, 900, F, universal hinges, and Silentia, so it integrates into a wide range of Salice hinge lines used in cabinetry. Angle possibilities from minus 7.5 degrees to plus 7.5 degrees mean it can be used wherever doors meet angled or non standard cabinet fronts, such as end cabinets or special display units. The standard 32mm hole centers align with common system drilling, allowing the adapter to drop into existing 32mm casework layouts without altering boring patterns across the run. Because the hinge affixes to the plate by sliding onto the adapter and then tightening the pre mounted screw on the plate, the connection is secured directly at the mounting interface, which helps maintain consistent geometry when multiple doors are hung in sequence.
Height adjustment of plus or minus 2 mm by slotted holes gives the installer a small but important range to move the plate vertically after initial screw placement, supporting consistent door gaps along stacked doors or across paired doors. Variable positioning that allows virtually infinite angle applications lets the adapter be set precisely within its available angle band, so the hinge line can be tuned for each opening without rebuilding the cabinet face. The die-cast, nickel plated, corrosion resistant build keeps the adapter stable and resistant to corrosion at the hinge interface, which supports smooth operation of the hinge over time in normal cabinet environments. A lifetime warranty backs the adapter, indicating that it is intended for long term service in cabinet installations and can be specified with confidence in hinge layout planning.
The SAV354X9S Series 200 adapter is a hinge spacer and wedge that creates angled mounting at the hinge plate, helping set door position on angled or non standard cabinet fronts.
The adapter provides angle possibilities from minus 7.5 degrees to plus 7.5 degrees, so the hinge line can be shifted inward or outward to suit the cabinet angle.
The adapter uses slotted holes for mounting, giving height adjustment of plus or minus 2 mm so the plate can be moved slightly up or down to refine door reveals.
The adapter is built with standard 32mm hole centers, aligning with typical system-bored cabinet panels used in many shop and production layouts.
The hinge slides onto the plate and is then secured by tightening the pre mounted screw on the plate, creating a firm connection at the adapter.
The adapter is for hinge series 100, 200, 400, 600, 900, F, universal hinges, and Silentia, so it supports many Salice hinge families.
This Salice Series 200 10 degree die cast adapter gives hinged doors angle and height adjustment directly at the mounting plate, which is valuable when cabinets use angled faces or need fine tuning of reveals. Angle possibilities from minus 7.5 degrees to plus 7.5 degrees, combined with height adjustment of plus or minus 2 mm, let installers dial in alignment without reboring panels. Compatibility with hinge series 100, 200, 400, 600, 900, F, universal hinges, and Silentia means it fits into many Salice hinge plans. For cabinet runs that demand precise, repeatable alignment on angled fronts, this adapter offers a dedicated, corrosion resistant mounting solution.
Sold In: 300 Each