Salice Series CU Silentia hinge gives face-frame cabinet doors soft-close control while keeping the hardware concealed, so door motion is managed without interrupting the cabinet look. This hinge is specified as a 1-9/16 inch overlay face-frame hinge, which sets the door position relative to the face frame for consistent reveals across a run of cabinets. Being part of Salice Americas concealed cabinet hinge class, it mounts inside the cabinet, which protects the hinge from edge damage during normal use. The hinge is described as perfect when a different soft closing strength is desired, so the integrated mechanism supports tuning the close for different door sizes on the job. A 106 degree opening provides wide access into the cabinet while keeping the door short of over-rotation in typical kitchen layouts.
This Salice America hinge is designated as a face-frame hinge, so it is intended to mount inside cabinets built with a front frame rather than frameless sides. The screw-on description indicates that both the hinge cup and mounting components fasten with screws, which supports secure attachment in solid wood or plywood face frames. The hinge uses an 11 mm (7/16 inch) cup depth for all hinges in the Silentia line, so boring equipment can be set once and run multiple doors without depth changes. The possible drilling distance on the door is listed as 2.5 mm to 6.0 mm (3/32 inch to 1/4 inch), which gives flexibility in cup setback to work with different overlays and edge conditions.
This hinge is specified as a 1-9/16 inch overlay face-frame hinge, so it fits cabinet layouts where the door needs to overlap the face frame by that amount to align with adjacent doors and drawer fronts. As part of the concealed face frame hinge category, it suits kitchen, bath, or built-in cabinets where a hidden hinge look is preferred. The nickel plated steel finish on the hinge body provides a hard metallic surface, which stands up well in interior woodworking environments where hinges see repeated movement. Because this hinge belongs to the Salice Series CU Silentia group, it keeps the door close action controlled across common residential cabinet applications.
The Salice Series CU Silentia 3 cam adjustment hinges provide three separate cam points, so door position can be tuned after installation for consistent gaps and flush faces across a bank of doors. The integrated soft close mechanism is built into the hinge, which keeps the damping function protected and in the same place on every door, simplifying field adjustments. The decelerating mechanism can be easily deactivated using the clearly visible activation switch on the front of the unit, so installers can reduce soft close strength on narrower or lighter doors while keeping the same hardware. The possible drilling distance range of 2.5 mm to 6.0 mm lets the hinge work within different boring patterns, supporting repeatable hinge placement when cabinet lines use slightly different setbacks. A 106 degree opening angle offers enough swing to work comfortably inside the cabinet during fitting, while helping maintain a predictable door arc around adjacent cabinets or walls.
The Salice Series CU Silentia hinge is described as a face-frame hinge, so it is intended for cabinets built with a front frame rather than frameless side panels.
The CUP3ED9R hinge is specified as a 1-9/16 inch overlay hinge, which positions the door to overlap the face frame by that dimension for consistent reveals.
This Salice Silentia hinge provides a 106 degree opening, which gives wide cabinet access while keeping the door within a controlled swing path.
The 3 cam adjustment hinge design offers three fine-tuning points, which lets installers adjust door position for better alignment after the hinges are mounted.
This hinge has an integrated soft close mechanism that can be deactivated using the activation switch on the front, which changes the decelerating action.
The hinge uses an 11 mm (7/16 inch) cup depth and a possible drilling distance range of 2.5 mm to 6.0 mm, which guides door boring setup.
This Salice America concealed cabinet hinge combines a 1-9/16 inch overlay face-frame design with a 106 degree opening, so it supports both door position and access on cabinet installations. The 3 cam adjustment and 11 mm cup depth make it practical for production or retrofit work where repeatable boring and post-install alignment speed up fitting. With the integrated Silentia soft close mechanism that can be deactivated at the hinge, one model handles different soft closing strength needs across a project. For face-frame cabinet runs that call for concealed hinges and controlled door swing, this Salice Series CU Silentia hinge provides a defined overlay and adjustment range to plan around.
Sold In: 1 Each