Salice Series CU Silentia hinge delivers a concealed cabinet hinge solution for face-frame work where soft closing strength needs to be tuned. This 1-9/16 inch overlay hinge is designed for overlay face-frame cabinets, giving doors a defined position relative to the frame in a typical kitchen or shop install. As a concealed cabinet hinge, it keeps hardware out of sight when the door is closed, supporting clean front elevations on finished runs. The hinge provides a 106 degree opening angle, allowing doors to swing wide enough for access while still protecting adjacent fronts in standard layouts. With its nickel plated steel construction, the hinge brings a hard-wearing metal surface to everyday door cycles in busy cabinet applications.
This 1-9/16 inch overlay face-frame hinge is designed to position doors over the frame by that specific amount, which helps installers and shops hit consistent overlays across multiple openings in a run. As a face-frame hinge in the concealed cabinet hinges class, it fits cabinet construction where a frame outlines the opening rather than frameless sides, guiding hardware choice early in project planning. The dowel configuration on this CUR3ED9R model supports dowel-based mounting in the door, tying directly into tooling setups where bore holes and dowel seats are already part of the door machining process.
This Salice America CUR3ED9R hinge sits in the concealed face frame hinges category, so it is oriented to cabinetry that uses face frames rather than frameless boxes. In that context, the 1-9/16 inch overlay value defines how far the door overlays the frame, which matters when lining up multiple doors across a wall of cabinets or a bank of base units. The 106 degree opening angle provides enough door swing to access interior space in typical kitchen and shop layouts, while still being modest enough to coordinate with adjacent cabinets. Because the cup depth is fixed at 11 mm across the hinge line, production teams can bore doors using a single depth setting and then choose other Series CU Silentia models as needed without changing the cup drilling process.
The integrated Silentia soft close mechanism is built directly into the hinge, so door deceleration happens at the hardware point and does not rely on separate dampers, which streamlines hardware selection. Being able to deactivate this soft close mechanism using the switch on the front of the hinge helps when tuning closing speed for particular doors, such as when a lighter door needs a different closing behavior than a heavier neighbor. The 3 cam adjustment built into this hinge lets installers tweak door position after mounting, using the cams to adjust alignment rather than elongating screw holes or remounting. That multi-directional adjustment window supports tight, even reveals across doors, which is especially important on high-visibility banks of cabinets. The specified drilling distance range on the door, from 2.5 mm to 6.0 mm, gives some flexibility in where the cup bore lands while still maintaining the intended overlay and soft close performance defined for this hinge family.
This hinge is in the concealed face frame hinges category, so it is aimed at cabinets built with a face frame around the opening rather than frameless box construction.
The hinge is specified as a 1-9/16 inch overlay face-frame hinge, which sets how far the door overlays the cabinet frame when installed.
The CUR3ED9R hinge provides a 106 degree opening angle, giving doors a wide swing for access while supporting typical cabinet layouts.
The hinge has an integrated Silentia soft close mechanism that decelerates the door at the end of closing, and the mechanism can be deactivated using the front-mounted activation switch.
The hinge features 3 cam adjustment, allowing fine-tuning of door position in multiple directions so reveals and alignment can be dialed in after mounting.
This hinge uses an 11 mm cup depth across the line and supports a possible door drilling distance from 2.5 mm to 6.0 mm, shaping boring setups.
Choose this Salice Series CU Silentia hinge when a 1-9/16 inch overlay face-frame application needs concealed hardware with integrated soft closing. The combination of 3 cam adjustment, 106 degree opening, and defined drilling and cup dimensions supports efficient setup in the shop and clean alignment on site. For cabinet runs built around face frames, this CUR3ED9R model brings a practical mix of overlay control, closing behavior options, and adjustment range to everyday hinge work.
Sold In: 300 Each