Laurey Beacon Hill 1-1/4" (32 mm) Diameter Satin Nickel Knob, 19028

Laurey 19028 Beacon Hill Knob For Cabinets

Laurey 19028 Beacon Hill knob is a 1-1/4 inch, or 32 mm, square satin nickel knob designed for cabinets and drawers, so it delivers a consistent, compact pull point that suits residential or light commercial casework. The knob is part of the Beacon Hill Collection, which provides a coordinated look across multiple knobs in the same design family, helping projects maintain visual continuity from door to drawer. Its square 32 mm L x 32 mm W profile creates a defined hand contact area, giving fingers a clear edge to grab for everyday opening and closing. The 25 mm height sets the knob off the front of the cabinet, which creates clearance for the hand while keeping the projection tight to the face, useful on narrow walkways or closely spaced cabinetry. A satin nickel finish on the zinc construction presents a muted metallic appearance that works with many door and drawer finishes.

Key Beacon Hill Knob Details For Projects

• The Beacon Hill Collection identity ties this knob to a known Laurey decorative hardware series, which helps maintain a unified look when coordinating multiple points of access on cabinets and drawers throughout a space.
• The 32 mm length and 32 mm width define a square footprint that lines up well with modern cabinet layouts, giving installers a clear center for drilling and layout while delivering a balanced appearance on both doors and drawers.
• The 25 mm height dimension describes how far the knob stands off the surface, providing enough space for a secure grip while staying compact, which is useful where protrusion into walkways or tight clearances is a concern.
• The satin nickel finish identifies the surface appearance, supporting design choices where a softer metallic tone is preferred, and helps the knob visually coordinate with other satin nickel decorative hardware in the same room.
• The zinc construction defines the base material of the knob, which gives a solid-feeling pull point for regular cabinet and drawer use while supporting the detailed Beacon Hill design shape in a consistent form.

Mounting This 32 Mm Square Cabinet Knob

This Laurey Beacon Hill knob uses a standard through-bore installation into cabinet doors or drawer fronts, so it mounts from the backside and presents the square 32 mm face on the exterior. The 1-1/4 inch, or 32 mm, size centers well on typical cabinet rails and drawer fronts, which simplifies layout when setting consistent handle heights across a bank of doors. With a 25 mm height, the knob projects far enough to grasp without overextending from the surface, supporting applications where adjacent doors, appliances, or walls sit close to the cabinetry. The square shape also gives installers clear visual reference points for rotational alignment, helping keep multiple knobs in a straight and level presentation along a run of cabinets.

Using The Beacon Hill Satin Nickel Knob In Work

Where This Satin Nickel Drawer Knob Fits

The Laurey 19028 Beacon Hill Collection satin nickel knob is specified for cabinet and drawer use, making it suitable wherever a compact square pull is needed on casework fronts. Its presence in the Decorative Hardware & Moldings category defines it as a visible, style-forward component rather than a concealed functional part, which aligns it with kitchen, bath, office, or built-in cabinetry where appearance is a design driver. The 32 mm L x 32 mm W footprint works with doors or drawers that benefit from a centered, geometric pull, particularly in layouts using straight lines and right angles. The satin nickel finish allows this knob to sit comfortably with other satin nickel decorative hardware in the same project, supporting consistent tone across hinges, pulls, and knobs specified in similar finishes.

Details That Support Alignment And Consistency

The stated 1-1/4 inch, or 32 mm, dimension gives installers a clear reference for positioning the Laurey Beacon Hill knob in relation to door edges, rail widths, and drawer fronts, which helps achieve uniform spacing along an entire cabinet run. With the knob defined as 25 mm high, project planners know exactly how far it projects from the surface, allowing them to factor in door swing and adjacency to walls or tall panels when laying out hardware locations. The square geometry helps with rotational alignment, because its edges naturally signal any twist relative to cabinet lines, so runs of knobs can be kept visually straight without guesswork. As part of the Beacon Hill Collection and the Laurey brand, this knob carries a consistent design language, which benefits projects that repeat the same knob throughout multiple rooms or banks of casework for a unified, planned appearance.

Common Questions About This Laurey Cabinet Knob

Select This Beacon Hill Knob For Coordinated Cabinets

The Laurey 19028 Beacon Hill satin nickel knob offers a defined 32 mm square footprint, 25 mm height, and zinc construction, giving projects a compact, consistent pull point. For cabinets and drawers needing a coordinated satin nickel square knob, this Beacon Hill piece aligns dimensions, finish, and design into a single, ready-to-spec choice.