Laurey Beacon Hill 7-9/16" (192 mm) Center to Center Polished Nickel Pull, 19314

Laurey Beacon Hill Pull For Cabinet And Drawer

Laurey Beacon Hill pull gives cabinets and drawers a polished nickel look while keeping lines sleek and minimalist, which helps modern and transitional jobs read clean and consistent across a run. The pull has a 192 mm center to center dimension, so installers can match this to drilling patterns on new or existing fronts without layout guesswork. Overall length is 212 mm, which visually balances wider drawer fronts or taller doors. The pull is constructed of zinc, providing a solid, uniform base material that pairs well with the plated finish for a consistent appearance. The polished nickel finish reflects surrounding light, which can help tie together hinges or other visible nickel hardware on the project. With dimensions of 30 mm height, 14.5 mm width, and 20 mm depth, the pull projects enough to grab comfortably while staying low profile on the face.

Key Beacon Hill Pull Details For Projects

• The 192 mm center to center drilling dimension matches common cabinet boring patterns, which helps speed layout on new work and simplifies replacing existing pulls that already use this spacing.
• The 212 mm overall length stretches across more of the drawer or door face, which can visually anchor wider fronts and create a more proportional hardware layout on banks of drawers.
• The polished nickel finish coordinates with other nickel-finished components, which helps maintain a unified look across hinges, knobs, and other visible hardware in the same space.
• Zinc construction provides a consistent base for the plated finish, which supports a uniform appearance from pull to pull across a full kitchen or bank of casework.
• Dimensions of 30 mm height, 14.5 mm width, and 20 mm depth create a profile that stands off the surface enough to grip while staying streamlined for a clean cabinet face.

Mounting Dimensions That Support Straightforward Fit

The Laurey Beacon Hill pull uses a 192 mm center to center measurement, which lets installers set or match hole locations accurately across multiple doors and drawers. This spacing is clearly identified, so shop drawings and on-site layout can reference one consistent number. The 20 mm depth defines how far the pull stands off the front, which affects hand clearance when grabbing from above or below on base and wall cabinets. With a 30 mm height and 14.5 mm width, the pull footprint remains compact on narrower rails and stiles, helping it sit comfortably within common cabinet frame dimensions.

Using The Laurey Beacon Hill Pull In Cabinet Work

Where This 192 Mm Pull Works Best

The Laurey Beacon Hill pull with 192 mm center to center drilling suits cabinet and drawer fronts laid out for this specific spacing, allowing consistent handle placement across a kitchen, bath, or built-in run. Its 212 mm overall length helps when hardware needs to span a larger area on wide drawers, adding visual weight without overwhelming the front. The polished nickel finish pairs well anywhere a bright, reflective metal look is desired, such as with other polished nickel hinges or faucets in the room. Zinc construction supports use in typical interior cabinet environments, where a solid metal pull is preferred over lighter decorative options. Height at 30 mm and width at 14.5 mm allow the pull to sit comfortably on standard face-frame and frameless fronts, fitting within rails while leaving space around edges.

Dimensions That Help Repeatable Layout And Alignment

The 192 mm center to center dimension on the Beacon Hill cabinet pull gives a clear drilling reference, which helps jigs and CNC programs repeat the same hole pattern for every front. Overall length of 212 mm allows installers to center the pull on a drawer or door and visually check equal reveal at each end, supporting straight sightlines along a bank. With a 20 mm depth, the pull projects far enough to grip from different angles, which can be helpful on base cabinets where hands often approach from above. The 30 mm height and 14.5 mm width define a compact contact area against the front, which can aid in aligning the pull square to edges during mounting. The polished nickel finish works with the defined geometry to create consistent reflections along each handle, helping small alignment errors show up quickly during install and adjustment.

Common Laurey 19314 Beacon Hill Pull Questions

Choose The Laurey Beacon Hill Pull For Your Next Run

The Laurey Beacon Hill pull with 192 mm center to center drilling and 212 mm overall length gives cabinet and drawer fronts a consistent, polished nickel look anchored by clear dimensions. Zinc construction and defined measurements of 30 mm height, 14.5 mm width, and 20 mm depth support confident planning around hole spacing, layout, and visual proportion across a full bank of cabinetry.