Laurey Beacon Hill 5-1/16" (128 mm) Center to Center Satin Nickel Pull, 19128

Laurey Beacon Hill Satin Nickel Pull For Cabinets

Laurey Beacon Hill satin nickel pull gives cabinets and drawers a clean, modern look with dimensions sized for comfortable everyday use. The pull uses a 5-1/16 inch (128 mm) center to center mounting, which matches a common drilling pattern so layouts stay consistent across multiple doors and drawers. Overall length of 148 mm provides enough hand clearance along the rail, which helps with confident gripping when fronts are heavier. A satin nickel finish on the pull creates a muted metallic appearance that pairs well with many door finishes, supporting cohesive runs on banks of cabinets. The pull is 24.5 mm high, so it stands off the surface enough for fingers to wrap around, which reduces fumbling on frequently used drawers. A zinc construction gives the Beacon Hill pull a solid feel in hand while keeping weight manageable for standard cabinet fronts.

Key Beacon Hill Pull Details For Daily Use

• The Beacon Hill collection pull features a sleek and minimalist design, which helps projects achieve a contemporary look without visual clutter on cabinet faces.
• A 5-1/16 inch center to center dimension aligns with the 128 mm specification, simplifying layout when matching existing drilling or templated boring patterns in a shop.
• Satin nickel finish on the Laurey 19128 pull softens reflections, so fingerprints and light scuffs are less visually distracting on high-touch drawers and doors.
• The pull measures 148 mm in overall length, giving installers a clear sense of rail coverage on the door or drawer face for proportional placement.
• A height of 24.5 mm and width of 14 mm define the hand contact area, guiding designers toward fronts that leave enough edge distance around the pull.
• A 20 mm depth positions the gripping surface away from the cabinet face, creating room for fingers to pull comfortably on thicker doors.

Mounting Dimensions That Support Straightforward Layout

The Laurey Beacon Hill Series 5-1/16 inch (128 mm) center to center satin nickel pull focuses on predictable mounting dimensions for repeatable installation. Its 128 mm center to center drilling means installers can run a single boring setup across an entire job, keeping spacing consistent. With an overall length of 148 mm, there is a clear reference for how far the pull spans on door and drawer fronts, which helps in balancing margins near panel edges or rails. The 20 mm depth dimension signals how far the pull projects from the surface, which is useful when planning clearances near adjacent doors or walls. A 24.5 mm height and 14 mm width outline the body profile, supporting decisions about where to place the pull on narrow or wide rails without crowding surrounding details.

Using The Laurey 19128 Pull In Cabinet Projects

Where This Beacon Hill Collection Pull Works Best

The Laurey 19128 Beacon Hill collection satin nickel pull is designed as a decorative handle for cabinets and drawers, so it suits kitchen, bath, and built-in casework that call for a streamlined profile. Its 5-1/16 inch (128 mm) center to center size matches a common hardware standard, making it a practical choice when new cabinet fronts use pre-bored 128 mm holes or when a layout is patterned around this spacing. The satin nickel finish lets the pull blend into projects where a soft metallic tone is preferred over bright chrome, helping it tie together hinges or other satin nickel decorative hardware. With an overall length of 148 mm, the pull reads as substantial on typical drawer widths, which supports visual balance when multiple pulls are lined up across a bank of drawers. The zinc construction gives the piece a sturdy feel suitable for regularly used cabinet doors and drawers.

Why The 128 Mm Size And Profile Help Workflow

The 128 mm center to center dimension on this Laurey Beacon Hill cabinet pull standardizes drilling, so jigs and boring equipment can stay set to one measurement throughout a run. That repeatability reduces layout steps on face frames and panels, particularly on jobs with many identical drawers. The pull depth of 20 mm keeps the gripping surface consistently offset from the cabinet, which helps doors open cleanly when positioned near appliances or adjacent cabinetry. A height of 24.5 mm and width of 14 mm define the contact area where hands meet the pull, giving installers predictable clearance for fingers across different door thicknesses. The satin nickel finish is part of the Beacon Hill collection, so the pull can visually coordinate with other Beacon Hill decorative hardware, supporting unified lines and consistent style across larger installations. Zinc construction behind the finish provides a solid-feeling handle for day-to-day cabinet operation.

Common Questions About The Laurey Beacon Hill Pull

Select This 128 Mm Satin Nickel Pull With Confidence

The Laurey Beacon Hill Series 5-1/16 inch (128 mm) center to center satin nickel pull offers a defined mix of dimensions, finish, and material that suits everyday cabinet and drawer use. Its 148 mm overall length, 24.5 mm height, 14 mm width, and 20 mm depth give clear sizing for layout decisions before drilling. A zinc body with satin nickel finish supports a modern appearance that works across many cabinet styles. For projects built around the Beacon Hill collection and 128 mm center to center drilling, this Laurey 19128 pull provides a straightforward, consistent option for running the same handle throughout a room.