Rev-A-Shelf maple cutlery tray insert is a wood drawer insert made from maple hardwood for organizing standard cutlery in kitchen base drawers. This Rev-A-Shelf drawer insert is sized at 20-5/8 inches wide, 22 inches deep, and 2-7/8 inches high. The product is designed to drop into 15 inch wide and 21 inch wide base drawers, based on the verified product description. Buyers looking for a silverware tray, divider tray, or silverware organizer can use this insert to create a more defined layout inside a drawer without building a custom organizer from scratch. The RS4WCT series is sold as an individual unit and is intended for drawer insert use in kitchen and bath cabinetry applications.
Key specs to confirm: This maple cutlery tray measures 20-5/8 inches wide, 22 inches deep, and 2-7/8 inches high. Rev-A-Shelf identifies it as a wood drawer insert made for standard cutlery and designed to drop into 15 inch wide and 21 inch wide base drawers. Before purchase, confirm your actual drawer interior width, interior depth, and side height, since nominal cabinet size and usable drawer space are not always the same. Also confirm whether your drawer hardware, box construction, or interior obstructions reduce usable space. Safety, load, compliance, and any installation hardware details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf 4WCT Series maple cutlery tray insert. The verified data states it is packed and sold as each.
What to verify before ordering: Check drawer interior dimensions, confirm the drawer is a base drawer application, verify that a 2-7/8 inch high insert clears the drawer opening and contents, and make sure you want a standard cutlery layout rather than a custom divider tray arrangement.
Buyers usually consider this type of product when a drawer is wide enough for loose utensils but not organized enough for daily use. A Rev-A-Shelf drawer insert like this one is aimed at that practical need. Instead of adding separate bins or temporary organizers, the tray drops into the drawer and creates a dedicated place for standard cutlery. That makes it a useful option for kitchen remodels, cabinet upgrades, or replacement of a worn plastic silverware organizer.
This specific wood drawer insert is part of the Rev-A-Shelf 4WCT Series and is made from maple hardwood. Buyers searching for a maple cutlery tray often want a wood look that matches other cabinet accessories more closely than molded plastic organizers. The verified dimensions of 20-5/8 inches wide by 22 inches deep by 2-7/8 inches high are important because drawer inserts only work well when the actual interior space supports the tray. If your drawer is sold as a 15 inch wide or 21 inch wide base drawer, that gives a starting point, but the interior dimensions still need to be checked before ordering.
For installers, the drop-in format can help speed up a cabinet accessory upgrade because the product is designed to sit inside the drawer rather than requiring a built-in layout from raw material. For serious DIY buyers, that means less fabrication work when the drawer dimensions line up. For replacement projects, it is also worth confirming whether the existing drawer opening, slide position, and drawer box shape leave the full 22 inch depth available. If your project calls for a silverware organizer in a drawer with unusual sides, internal hardware, or nonstandard clearances, confirm fit with technical documentation before purchase.
When comparing a wood drawer insert to other organizer styles, buyers usually focus on material, intended use, and fit. This Rev-A-Shelf maple cutlery tray insert gives you verified material information, a defined product class, and exact outside dimensions. That is useful because many drawer organization products are chosen or rejected based on whether they match the drawer interior and whether they are intended for cutlery rather than general storage.
A maple hardwood tray may appeal to buyers who want a natural wood accessory inside cabinetry. A drop-in drawer insert can also be easier to evaluate than a loose set of bins because the product arrives as a single insert meant for a specific use. Since this tray is identified for standard cutlery and for 15 inch wide and 21 inch wide base drawers, the buyer can compare those application details against the cabinet plan before ordering.
Another point in a generic comparison is consistency. A branded Rev-A-Shelf drawer insert gives a clear series reference, product dimensions, and stated use case. That can make specification and reorder work simpler for shops, installers, and maintenance teams. If you are comparing this silverware tray against another organizer, confirm the same basics on both products: material, exact dimensions, intended drawer type, included pieces, and whether installation is truly drop-in or requires added work. Where details are not listed, ask for technical documentation rather than assuming compatibility.
This Rev-A-Shelf maple cutlery tray insert is designed for 15 inch wide and 21 inch wide base drawers, but actual interior drawer dimensions must be confirmed before ordering.
This wood drawer insert measures 20-5/8 inches wide, 22 inches deep, and 2-7/8 inches high.
This silverware tray is described by Rev-A-Shelf as designed to drop into base drawers for cutlery organization.
This rev a shelf drawer insert is made from maple hardwood according to the verified product data.
This Rev-A-Shelf drawer insert is designed for use with standard cutlery.
This product is packed and sold as each, so the verified listing supports one tray insert per order unit.
This maple cutlery tray is 2-7/8 inches high, so drawer side height and opening clearance should be checked before purchase.
This product is classified under kitchen and bath cabinet accessories, but buyers should confirm actual drawer fit and intended storage use.
Installation hardware and technical documentation are not verified in the provided data and should be confirmed before ordering. Follow manufacturer installation guidance and local building requirements where applicable.
silverware tray selection is easier when you start with verified dimensions and intended drawer use. This Rev-A-Shelf maple cutlery tray insert includes a single wood drawer insert made from maple hardwood and sized at 20-5/8 inches by 22 inches by 2-7/8 inches. Before purchase, confirm your drawer's true interior width, depth, and height, and verify that your base drawer matches the stated application. If you need a drop-in organizer for standard cutlery, this Rev-A-Shelf drawer insert gives you a clear, specification-based option to review.
Buyers comparing a revashelf organizer should focus on material, dimensions, and drawer application. This divider tray is a maple hardwood insert for standard cutlery, sold individually, and intended for selected base drawer sizes. Confirm fit first so the tray works as expected in your cabinet layout.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RS4WD-22-1 Mfr# 4WD-22-1 | Rev-A-Shelf 4WD Series 1/2"Wx22"Dx2-7/8"H Maple Drawer Divider, -4WD-22-1 | ||||
Sold in: 1 Each |  RS4WD-22SH-1 Mfr# 4WD-22SH-1 | Rev-A-Shelf 4WD Series 1/2"Wx22"Dx2-3/8"H Maple Drawer Divider, -4WD-22SH-1 |