Rev-A-Shelf SBDT Series Almond Drip Trays, 28-1/2"W x 23-1/4"D x 3/4"H, - SBDT-2730-A-1

Choose a Rev-A-Shelf drip tray

Rev-A-Shelf drip tray helps protect a sink cabinet from minor leaks in kitchen and bath installations. This Rev-A-Shelf under sink organizer is part of the SBDT Series and is sized at 28-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high. The tray holds 1.75 quarts of water and comes in an almond finish for buyers matching light cabinet interiors or existing mats and basins used under plumbing. The product is designed for sink base use, and the manufacturer notes that installation is recommended for new cabinetry. The tray may be difficult to install after the sink and countertop are already in place, so planning the install stage matters before ordering.

See how this under sink organizer helps

• Rev-A-Shelf sink base drip tray design - Helps protect the sink cabinet from minor leaks before moisture reaches the cabinet floor.
• 28-1/2 inch width - Gives buyers a clear starting point when checking sink base cabinet interior fit.
• 23-1/4 inch length - Helps cover a broad cabinet bottom area where supply lines and drains typically sit.
• 3/4 inch height - Creates a shallow containment edge that helps manage small water events.
• 1.75 quart water capacity - Provides measurable containment for minor drips and small plumbing leaks.
• Almond finish - Supports a coordinated look in cabinets where an almond drip tray is preferred.
• SBDT Series format - Gives buyers a recognizable Rev-A-Shelf tray family when comparing sizes for different sink bases.
• Recommended for new cabinetry - Helps installers plan tray placement before the sink and countertop reduce access.

Confirm sink base drip tray details

Key specs to confirm: This sink base drip tray is a Rev-A-Shelf SBDT Series tray with an overall size of 28-1/2 inches wide by 23-1/4 inches long by 3/4 inch high. It holds 1.75 quarts of water and is described as an almond drip tray for sink base cabinet protection from minor leaks. Before purchase, confirm your cabinet interior width and depth, plumbing layout, and whether the tray can be installed before the sink and countertop go in. Load, safety, compliance, and any installation hardware details are not provided here and should be confirmed with the manufacturer or technical documentation if needed for your project.

What's included: Verified data identifies the product as one Rev-A-Shelf SBDT Series almond drip tray. Other included items are not specified and should be confirmed before ordering.

What to verify before ordering: Check cabinet inside dimensions, obstructions from drain lines or water lines, install timing in relation to the sink and countertop, and whether the almond color is the right match for your cabinet interior. Follow manufacturer installation guidance and local building requirements where applicable.

Compare cabinet drip tray buying factors

Use a sink base drip tray wisely

A sink base drip tray is usually chosen by cabinet shops, installers, remodelers, and serious DIY buyers who want a simple way to help protect the cabinet floor from small plumbing leaks. In many sink bases, even a slow drip can stain or swell the cabinet bottom over time. A tray like this Rev-A-Shelf drip tray creates a contained area under the drain and supply lines, which can help keep minor leaks from spreading across the full cabinet floor.

This model is intended for buyers who need a tray specifically sized at 28-1/2 inches wide and 23-1/4 inches long. That makes fit confirmation important. A sink base drip tray that is too wide may not drop into place, and one that is too small may leave exposed areas around the plumbing. The 3/4 inch height gives the tray a shallow lip, and the verified 1.75 quart capacity gives the buyer a clear reference for minor leak containment. It is a practical choice when the goal is early leak management rather than a deep basin for major water events.

The manufacturer states that this cabinet drip tray is designed to protect a sink cabinet from minor leaks and recommends it for new cabinetry. That matters in real jobs. When a tray is installed before the sink and countertop are set, access is easier and placement is more direct. If the sink and countertop are already installed, a Rev-A-Shelf under sink tray may be harder to maneuver into position. Buyers planning retrofit work should confirm access around plumbing, braces, and cabinet openings before ordering.

For buyers comparing mats, basins, and molded trays, this product fits the use case where a formed tray with a defined capacity is preferred. It is also a fit for projects where an almond drip tray works better visually than a silver interior accessory. If your project needs a different color, a different size, or a tray for an existing cabinet with limited access, confirm those requirements before committing to this specific SBDT Series model.

Compare cabinet drip tray options carefully

When buyers compare cabinet drip tray options, the most useful points are usually fit, capacity, install timing, and finish. This Rev-A-Shelf product gives clear verified dimensions, a stated 1.75 quart capacity, and a defined use in sink base cabinets. Those facts make it easier to compare than listings that only describe general under sink protection without exact sizing.

Another key difference in this product type is how the tray is expected to be installed. This tray is recommended for new cabinetry, which tells the buyer that access during cabinet build or early installation is part of the intended use. That is useful for professionals who want predictable placement and fewer surprises once the sink is installed. For retrofit jobs, the same note acts as a caution to measure openings and working room carefully.

Brand consistency can also matter when a shop or contractor is ordering multiple cabinet accessories from the same source. Rev-A-Shelf is clearly identified here, along with the SBDT Series product family and the almond finish. That gives a straightforward reference point when matching other sink cabinet leak tray sizes in the same line. While some buyers may also search for mats or basins, a molded sink cabinet leak tray with stated dimensions and capacity can be easier to evaluate for fit and intended use.

If your project depends on specific hardware, detailed install instructions, or compliance documentation, those items are not verified in the provided data. In that case, the safest path is to confirm those details before ordering. For buyers who already know they need an under sink organizer focused on minor leak protection in a new sink base cabinet, this tray provides the core facts needed to make a fit-based decision.

Check cabinet drip tray fit questions

Order an almond drip tray confidently

Almond drip tray buyers should confirm cabinet interior size, plumbing clearance, and install timing before purchase. This Rev-A-Shelf SBDT Series tray is verified as 28-1/2 inches wide, 23-1/4 inches long, 3/4 inch high, and rated to hold 1.75 quarts of water for minor leaks. The verified included product is the tray itself, so check whether any extra installation items are needed for your job. If you are ordering for new cabinetry and want a cabinet drip tray sized for a sink base, this listing gives the key facts needed to verify fit.