Rev-A-Shelf CT Series 11-1/2"Wx21-1/4"Dx2-3/8"H White Cutlery Tray Insert, -CT-1W-10
Description
Choose a Rev-A-Shelf cutlery tray
Rev-A-Shelf cutlery tray is a plastic drawer insert made to organize cutlery in kitchen drawers with a standard, trim-friendly format. This Rev-A-Shelf drawer insert is part of the CT Series and comes in white heavy gauge plastic with a 2-3/8 inch depth. The cutlery tray measures 11-1/2 inches wide by 21-1/4 inches deep by 2-3/8 inches high, and the product data states that these inserts can be trimmed to accommodate drawer dimensions. For buyers replacing a worn kitchen drawer organizer or adding a new cutlery divider to a cabinet project, this tray offers a clear, measurable starting size. CT Series cutlery tray inserts ship with a clear protective coating that should be peeled off before use.
Use this drawer insert for order
- 11-1/2 inch width - gives buyers a defined starting size to compare against drawer interior width before trimming or installation.
- 21-1/4 inch depth - helps the cutlery tray cover a long drawer footprint for organized utensil storage.
- 2-3/8 inch height - provides a clear depth reference when checking drawer side height and clearance.
- Heavy gauge plastic construction - gives the Rev-A-Shelf cutlery tray a rigid polymer body for everyday drawer use.
- White finish - offers a clean look for buyers matching a light interior or replacing an existing white cutlery tray.
- Trim-to-accommodate design - helps installers adapt the plastic drawer insert to drawer dimensions when needed.
- CT Series cutlery tray format - gives buyers a standard Rev-A-Shelf drawer insert option within a broader tray size selection.
- Clear protective coating included for shipping - helps keep the tray surface protected until final installation and should be peeled off before use.
- Ten-pack configuration - supports shop, project, or multi-drawer purchasing when several matching cutlery trays are needed.
Confirm cutlery tray fit before ordering
Key specs to confirm: This cutlery tray is listed at 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Those dimensions are the main checkpoints for drawer insert fit. Measure the inside width, inside depth, and usable drawer height before ordering. Because the product data states the tray can be trimmed to accommodate drawer dimensions, buyers should also confirm where trimming is acceptable in their application and whether surrounding hardware or drawer box construction affects fit. Safety, load, compliance, and any material performance details beyond heavy gauge plastic are not provided here and should be confirmed with the manufacturer or technical documentation if required for the project.
What's included: Verified product data identifies a Rev-A-Shelf CT Series white cutlery tray insert in a ten-pack configuration. The trays ship with a clear protective coating that should be peeled off before use.
What to verify before ordering: Confirm the drawer's true interior opening, depth behind the drawer front, side height, and whether trimming is needed. Check that a white plastic drawer insert matches the project finish requirements and confirm that a ten-pack quantity fits the scope of your job.
See how this cutlery tray fits
Match the cutlery tray to drawers
A cutlery tray is usually purchased for one of two reasons: replacing a loose organizer that slides around in the drawer, or adding a purpose-built drawer insert during a cabinet build or refresh. In either case, the main issue is fit. A tray that is too wide will not drop into the drawer. A tray that is too shallow or too narrow may leave wasted space or move during use. This Rev-A-Shelf cutlery tray gives buyers a verified reference size of 11-1/2 inches by 21-1/4 inches with a 2-3/8 inch height, so the first job is simple measurement.
For a kitchen drawer organizer application, the white cutlery tray works well when the drawer box has enough interior depth and side clearance to accept the tray body. The product data also states that these CT Series inserts can be trimmed to accommodate drawer dimensions. That matters for installers and cabinet shops that need a trim to fit cutlery tray rather than a fixed organizer with no adjustment. If your drawer has unusual side construction, a notch requirement, or hardware intrusion, confirm exactly how much trimming is appropriate before purchase because the verified data does not define trim limits.
This drawer insert is also relevant for multi-unit jobs. The ten-pack format suits projects where several drawers need the same cutlery divider layout and color. In a residential kitchen, that can mean matching utensil storage across multiple cabinet banks. In a shop setting, it can simplify ordering when consistent drawer insert sizing is important. Buyers who want a plastic drawer insert that arrives protected should note that the tray ships with a clear protective coating, which should be removed before use.
Because this is a heavy gauge plastic product, buyers get a polymer tray rather than wood or wire. That can be useful when a project calls for a wipe-clean kitchen drawer organizer with a standard molded form. If your project has strict finish, material, or compliance requirements, review manufacturer documentation before final approval.
Compare this drawer insert with basics
When comparing a cutlery tray to generic drawer organizers, the most useful differences are measurable ones. This Rev-A-Shelf drawer insert has stated dimensions, a stated depth, a stated material type, and a stated trim-friendly design. Those facts help buyers make a fit decision faster than with unlabeled organizers that only show a photo. For installers, that reduces guesswork at the cabinet.
A basic organizer may work for temporary storage, but a defined drawer insert is often easier to plan around because width, depth, and height are known before the drawer is assembled or modified. The CT Series cutlery tray also comes from a recognized cabinet accessory brand, which matters when a buyer wants a matching product family rather than a one-off tray with unknown sizing. The white finish gives a straightforward appearance for many cabinet interiors, and the heavy gauge plastic body aligns with practical kitchen use.
Another point of comparison is job scale. A ten-pack can make sense for production work, repeat drawer layouts, or stocking common cabinet accessories in a shop. If you only need a single tray, confirm ordering quantity and project needs before checkout. For any installation where drawer slides, drawer box joinery, or interior obstructions could affect placement, follow manufacturer installation guidance and local building requirements where applicable.
Ask fit questions about this drawer insert
Will this cutlery tray fit any kitchen drawer?
This cutlery tray fits drawers that can accept its 11-1/2 inch width, 21-1/4 inch depth, and 2-3/8 inch height, subject to any trimming you plan to do.
Can this Rev-A-Shelf cutlery tray be trimmed?
This Rev-A-Shelf cutlery tray is described as trim-capable to accommodate drawer dimensions, but buyers should confirm acceptable trim points for their exact installation.
What color is this drawer insert?
This drawer insert is white according to the verified product name and product description.
What material is the CT Series cutlery tray made from?
The CT Series cutlery tray is made from heavy gauge plastic.
How deep is this white cutlery tray?
This white cutlery tray is 21-1/4 inches deep and 2-3/8 inches high, so both dimensions should be checked against the drawer interior.
Does the tray come ready to use out of the box?
The tray ships with a clear protective coating, and that coating should be peeled off before use.
Is this sold as one tray or multiple trays?
This product is identified as a ten-pack configuration in the verified product data.
What should I measure before ordering this plastic drawer insert?
This plastic drawer insert requires checking inside drawer width, usable depth, drawer side height, and any obstructions that may affect trimming or placement.
Can I use this as a replacement cutlery divider?
This cutlery divider can work as a replacement if the drawer dimensions and required tray size match the listed measurements.
Are load ratings or compliance details listed for this tray?
This tray does not include load, safety, or compliance details in the verified data, so confirm those with the manufacturer if your project requires them.
Order the right white cutlery tray
white cutlery tray buyers should focus on drawer measurements, project quantity, and whether trim-to-fit adjustment is needed. This Rev-A-Shelf cutlery tray is a CT Series drawer insert made from heavy gauge plastic and identified here in a ten-pack with protective coating. Before purchase, confirm interior drawer width, depth, height, and any slide or box details that could affect fit. If your job needs a matching plastic drawer insert across several drawers, verify that the white finish and pack size align with the full project scope.
