Rev-A-Shelf CT Series 11-1/2"Wx21-1/4"Dx2-3/8"H Almond Cutlery Tray Insert, -CT-1A-52

Choose a Rev-A-Shelf cutlery tray

Rev-A-Shelf cutlery tray provides organized storage for flatware in a kitchen drawer using a standard plastic drawer insert format. This Rev-A-Shelf drawer insert is part of the CT Series and is made from heavy gauge plastic with an almond finish. The cutlery tray insert measures 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Rev-A-Shelf states that these inserts can be trimmed to accommodate drawer dimensions, which helps when a cutlery divider needs to fit a range of drawer interiors. The CT Series cutlery tray ships with a clear protective coating that should be peeled off before use. Buyers looking for a rev a shelf or revashelf cutlery tray can use these verified dimensions and material details to confirm fit before ordering.

Use this drawer insert for order

• CT Series cutlery tray insert - Gives a dedicated place for flatware inside a kitchen drawer and helps separate utensils for faster daily access.
• 11-1/2 inch width - Helps buyers match the drawer insert to narrower drawer layouts before trimming or installation planning.
• 21-1/4 inch depth - Supports full-depth drawer organization where the drawer box can accept this longer cutlery tray format.
• 2-3/8 inch height - Provides a defined tray depth for standard flatware storage while helping buyers check drawer clearance.
• Heavy gauge plastic construction - Gives the Rev-A-Shelf cutlery tray a durable polymer build suited to repeated kitchen drawer use.
• Almond color - Lets buyers match the plastic drawer insert to cabinet interiors or existing drawer accessories.
• Trimmable design - Allows the cutlery divider to be adjusted to accommodate drawer dimensions when exact interior sizing needs a closer fit.
• Clear protective coating included from the factory - Helps protect the tray surface in transit and should be peeled off before the drawer insert is put into service.

Confirm cutlery tray insert fit details

Key specs to confirm: This cutlery tray insert is listed at 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Because Rev-A-Shelf states the CT Series can be trimmed to accommodate drawer dimensions, buyers should measure the actual inside width, inside depth, and usable height of the drawer box before ordering. Confirm that drawer hardware, box construction, and any interior obstructions will not interfere with placement. This product data does not include load ratings, safety certifications, or other compliance details, so those items should be confirmed with the manufacturer or technical documentation if they matter to your project.

What's included: Verified product data identifies one Rev-A-Shelf CT Series almond cutlery tray insert with a clear protective coating applied for shipping. Additional hardware or accessories are not specified in the verified data.

What to verify before ordering: Check the drawer's interior measurements, confirm the 2-3/8 inch tray height works with your drawer clearance, confirm whether trimming is needed, and verify that the almond finish is the right match for the cabinet interior and surrounding organizers.

Compare this cutlery divider for drawers

Use this cutlery tray in busy drawers

A cutlery tray insert like this is typically chosen when a kitchen drawer needs a simple way to separate forks, spoons, knives, and serving pieces without moving to a custom wood organizer. For installers, cabinet shops, and serious DIY buyers, the value starts with clear baseline dimensions. The Rev-A-Shelf cutlery tray is listed at 11-1/2 inches wide and 21-1/4 inches deep, so it gives you a starting point for planning a narrow or medium drawer layout. The 2-3/8 inch height also matters because drawer inserts need enough vertical space to sit inside the drawer without interfering with drawer operation.

This drawer insert is made of heavy gauge plastic, which is useful in kitchens where the organizer will see repeated daily contact from metal flatware. The almond cutlery tray finish can also matter when the inside of the drawer is visible and the buyer wants a coordinated look with other cabinet accessories. If the drawer opening is close but not exact, Rev-A-Shelf states that CT Series trays can be trimmed to accommodate drawer dimensions. That makes this cutlery divider a practical choice when the drawer box does not match a stock organizer perfectly, but the buyer still wants a standard polymer insert instead of a fully custom organizer.

Common buying scenarios include replacing a worn plastic organizer, adding order to a new kitchen drawer, or standardizing multiple cabinet drawers in a shop or residential project. In each case, the main pain point is usually fit. A plastic drawer insert that is too wide, too deep, or too tall can create wasted time on site. Before purchase, confirm the usable interior dimensions of the drawer box rather than relying only on nominal cabinet size. Also confirm how much trimming is acceptable for your installation and whether surrounding drawer hardware leaves the full depth available.

Compare this plastic drawer insert confidently

When buyers compare a plastic drawer insert to other organizer types, the main differences usually come down to material, adjustability, and how much measuring is required. This Rev-A-Shelf drawer insert gives a defined tray format in heavy gauge plastic, which helps buyers who want a ready-made organizer with known dimensions. Because it is part of the CT Series, it also fits within a broader family of standard plastic drawer inserts offered in multiple colors, according to the verified product description.

Another point of comparison is installation effort. Some drawer organizers require more assembly or a fully custom fit. This cutlery tray insert is positioned as a standard insert that can be trimmed to accommodate drawer dimensions, so it may simplify planning when the drawer is close to the listed size. Buyers should still measure carefully, because the verified data does not state trimming limits, tools required, or detailed installation steps. If those details affect your job, confirm them before ordering.

For buyers focused on consistency, the brand and product class matter. Rev-A-Shelf is the listed brand, and the item is clearly identified as a drawer insert in the kitchen and bath cabinet accessories category. That makes it easier to match this product to the intended application without relying on broad organizer claims. If your priority is a cutlery tray with a known size, almond color, heavy gauge plastic construction, and the ability to trim for drawer fit, this product gives those verified points clearly.

Ask fit questions about this drawer insert

Order the right Rev-A-Shelf drawer insert

Rev-A-Shelf drawer insert buyers should focus on fit first, then confirm finish and installation needs. This CT Series cutlery tray insert is an almond heavy gauge plastic organizer sized at 11-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high, with a protective coating to remove before use. Before purchase, verify the drawer's true inside dimensions, confirm whether trimming will be required, and make sure the included insert-only format matches your project scope.