Choose a Rev-A-Shelf cutlery tray

Rev-A-Shelf cutlery tray gives a dedicated place for sorting flatware inside a kitchen drawer. This polymer cutlery tray insert from Rev-A-Shelf Corporation is sized at 21-7/8 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. The almond cutlery tray format helps buyers match an existing drawer interior or planned cabinet finish. As a drawer insert, it is built for organizing cutlery and similar kitchen items in a defined layout. Buyers comparing a cutlery divider, kitchen drawer organizer, or drawer tray insert can use these verified dimensions to confirm whether the tray fits the drawer opening and usable interior depth before ordering.

Use this drawer insert for order

• Rev-A-Shelf polymer cutlery tray insert - gives a dedicated organizer format for separating cutlery inside a drawer.
• 21-7/8 inch width - helps buyers compare the tray to usable drawer width before purchase.
• 21-1/4 inch depth - helps confirm front-to-back drawer space for proper placement.
• 2-3/8 inch height - helps check side clearance and drawer interior height before install.
• Almond finish - helps coordinate the drawer insert with cabinet interiors or existing organizers.
• Drawer insert product class - gives a clear use case for kitchen drawer organization rather than general storage.
• Rev-A-Shelf CT Series design - helps buyers identify the correct series when replacing a matching tray.
• Manufacturer part CT-4A-52 - helps installers and purchasing teams verify the exact item when reordering.

Confirm cutlery tray insert fit details

Key specs to confirm: This cutlery tray insert is listed at 21-7/8 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. For a drawer insert, the most important checks are usable inside drawer width, inside depth, and inside height after accounting for drawer box construction and any hardware that may reduce clearance. The verified product data identifies this item as a polymer cutlery tray insert in almond from the Rev-A-Shelf CT Series. Material performance details, load limits, and any compliance information are not provided here and should be confirmed with the manufacturer or technical documentation if needed for your project.

What's included: Verified data identifies one Rev-A-Shelf CT Series polymer cutlery tray insert in almond. Additional hardware, templates, or instructions are not specified and should be confirmed before ordering.

What to verify before ordering: Confirm your drawer's clear inside dimensions, confirm that 2-3/8 inch tray height works with your drawer side and contents, confirm the almond color is the right match, and confirm you are ordering the correct Rev-A-Shelf CT Series part for the intended drawer.

See how this cutlery tray works

Match this cutlery divider to daily use

A cutlery tray insert is usually chosen when a drawer needs a fixed, repeatable layout for forks, knives, spoons, and serving pieces. In a kitchen remodel, a buyer may need an organizer that fits a specific drawer box instead of a loose, adjustable bin. In a replacement project, the priority is often matching the original tray size and color so the drawer keeps a uniform appearance. This Rev-A-Shelf drawer insert supports that type of purchase because the verified information clearly identifies the brand, CT Series, almond color, and overall dimensions.

For installers, the first concern is fit. A kitchen drawer organizer only works well when the usable inside dimensions are checked against the tray size. With this drawer tray insert, buyers can compare the listed 21-7/8 inch width and 21-1/4 inch depth to the actual drawer interior. The 2-3/8 inch height also matters, especially in drawers with low side clearance or where stacked utensils may sit above the tray edge. If your drawer has internal obstructions, soft-close hardware that reduces space, or unusual box construction, those conditions should be confirmed before ordering.

For serious DIY buyers, this almond cutlery tray can also serve as a straightforward way to organize a wide kitchen drawer without guessing at category fit. The verified product class is a drawer insert, and the verified product name identifies it as a cutlery tray insert, so the intended use is clear. Buyers searching for a cutlery divider, rev a shelf organizer, or revashelf tray for flatware can use the manufacturer part CT-4A-52 to confirm they are selecting the exact item needed.

Because the verified data does not list compartment counts, custom trimming details, or included accessories, those points should be checked if your application depends on them. That is especially important when replacing an existing insert where exact internal layout matters as much as outside dimensions.

Compare this drawer tray insert with confidence

When buyers compare one drawer insert to another, the most useful points are usually material, dimensions, color, and product identity. This product is clearly identified as a polymer cutlery tray insert from Rev-A-Shelf Corporation, which gives a defined brand reference for repeat orders and project documentation. The listed dimensions provide a direct fit check, which is often more valuable than broad marketing language when selecting a tray for a cabinet drawer.

A generic organizer may leave buyers guessing about exact size or intended use. In contrast, this product is described as a cutlery tray insert in the CT Series, with a specific manufacturer part number and almond finish. That makes it easier to align the item with cabinet schedules, replacement requests, or procurement records. For trade buyers, that kind of consistency can reduce ordering errors.

Another practical comparison point is installation planning. A drawer insert does not need complex evaluation if the basic fit data is clear, but it does require careful checking of drawer interior space. This product gives verified outside dimensions, which helps narrow the decision quickly. If your project also requires details such as compartment layout, edge profile, or exact included components, those are not stated in the verified data and should be confirmed before final purchase. Follow manufacturer installation guidance and local building requirements where applicable.

Check drawer insert questions before ordering

Order the right almond cutlery tray

almond cutlery tray buyers should confirm drawer interior width, depth, and height before purchase so the insert matches the intended cabinet drawer. This Rev-A-Shelf drawer insert is identified as a polymer CT Series cutlery tray in almond with overall dimensions of 21-7/8 inches by 21-1/4 inches by 2-3/8 inches. The verified data confirms the tray itself and the manufacturer part number CT-4A-52. If your project depends on internal layout, added parts, or other technical details not listed here, confirm those points before placing the order.