Rev-A-Shelf CT Series 17-1/2"Wx21-1/4"Dx2-3/8"H White Cutlery Tray Insert, -CT-3W-20

Choose a Rev-A-Shelf cutlery tray

Rev-A-Shelf cutlery tray gives kitchen drawers a defined place for forks, spoons, knives, and other everyday utensils. This cutlery tray insert is a white drawer insert from Rev-A-Shelf Corporation made from heavy gauge plastic and built to a standard depth of 2-3/8 in. The tray measures 17-1/2 in. wide by 21-1/4 in. deep, and the CT Series design can be trimmed to accommodate drawer dimensions when needed. Buyers looking for a kitchen drawer organizer or cutlery divider often need a simple insert that fits a common drawer opening while still allowing some adjustment on site. Rev-A-Shelf ships RSCT Series trays with a clear protective coating that should be peeled off before use.

See how this drawer insert helps

• 17-1/2 in. width - Helps buyers match the Rev-A-Shelf cutlery tray to drawer openings that need a wider utensil organizer.
• 21-1/4 in. depth - Gives the cutlery tray insert enough front-to-back coverage for standard kitchen drawer storage.
• 2-3/8 in. deep tray body - Supports organized utensil storage without guessing the insert height during drawer planning.
• Heavy gauge plastic construction - Gives this plastic drawer insert a solid feel for repeated daily use in kitchen drawers.
• White finish - Provides a clean, easy-to-see interior that works well in many cabinet and drawer layouts.
• Trim-to-fit CT Series design - Helps installers adapt the drawer insert to accommodate drawer dimensions when exact sizing needs adjustment.
• Rev-A-Shelf CT Series cutlery tray format - Gives buyers a dedicated cutlery divider layout instead of a flat tray with no separation.
• Protective coating included from shipment - Helps keep the Rev-A-Shelf drawer insert surface protected until final installation and use.
• Sold in broken and full box quantities - Lets buyers order for a single project or a larger cabinet program as needed.

Confirm cutlery tray insert fit

Key specs to confirm: This cutlery tray insert is listed at 17-1/2 in. wide, 21-1/4 in. deep, and 2-3/8 in. high. For a drawer insert, the most important checks are the inside drawer width, inside drawer depth, and available vertical clearance once the drawer closes. Because the Rev-A-Shelf CT Series can be trimmed to accommodate drawer dimensions, buyers should confirm how much material can be removed for their application and whether the drawer box shape allows a clean fit. Safety, load, compliance, and any installation hardware details are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: Verified product information identifies a Rev-A-Shelf CT Series white cutlery tray insert. RSCT Series trays ship with a clear protective coating that should be peeled off before use. Additional included items are not specified and should be confirmed before ordering.

What to verify before ordering: Confirm your exact inside drawer opening, drawer side height, and whether trimming is needed. Check that the drawer bottom is flat enough for a plastic drawer insert and verify whether you are ordering a single unit or a pack quantity for a larger job.

Match this white cutlery tray

Use this cutlery tray in drawers

This white cutlery tray is built for buyers who want a straightforward way to organize utensils inside a drawer without moving to a custom wood insert. In many kitchens, the main issue is not access to storage but the lack of separation inside the drawer. Loose forks, spoons, and serving pieces slide together, making the drawer harder to use and slower to reset. A dedicated cutlery tray insert addresses that problem by dividing the space into defined sections.

The Rev-A-Shelf drawer insert is useful in cabinet shops, remodeling projects, rental property updates, and serious DIY kitchen upgrades where a practical organizer is needed. The verified dimensions of 17-1/2 in. by 21-1/4 in. by 2-3/8 in. give buyers a starting point for fit. If the drawer is close but not exact, the CT Series is described as trim to fit, which can help when the drawer opening needs adjustment. Buyers should still confirm allowable trim and final fit before cutting.

This product also makes sense for repeat-use drawers where utensils are handled every day. Heavy gauge plastic construction matters because a kitchen drawer organizer sees frequent contact, sliding, and cleaning. The white finish can also make contents easier to identify at a glance. For installers, the protective coating shipped on RSCT Series trays helps keep the visible surface cleaner until the job is complete. For homeowners, the value is simple: a neater drawer layout with a product type made specifically for cutlery rather than a general bin.

If you are searching for a cutlery divider, plastic drawer insert, or trim to fit drawer insert, this product fits those use cases based on the verified CT Series description. Before purchase, check inside drawer measurements and closing clearance so the insert works with your actual drawer construction.

Compare this drawer insert with basics

Some drawer organizers are generic bins or flat mats that help contain items but do not create a fixed layout. A purpose-built cutlery tray insert gives a more defined arrangement for utensils and is easier to place consistently inside a drawer. That matters when the goal is repeatable organization across one kitchen or multiple cabinet installations.

This Rev-A-Shelf cutlery tray is also identified as heavy gauge plastic, which is a useful distinction for buyers who want a formed insert instead of a lighter temporary organizer. The CT Series description adds another practical point: the tray can be trimmed to accommodate drawer dimensions. That can be helpful when a standard-size insert is close to the drawer interior but still needs adjustment for a cleaner fit.

Compared with unstructured organizers, a dedicated drawer insert is easier to specify during planning because the width, depth, and height are stated. Here, the verified measurements are 17-1/2 in. wide, 21-1/4 in. deep, and 2-3/8 in. high. Those numbers give installers and buyers a clear fit check before ordering. The product is also clearly identified as a white cutlery tray insert from Rev-A-Shelf Corporation, which helps when matching project specifications or reordering for similar kitchens.

As with any insert, the right choice depends on the actual drawer interior, not just the outside cabinet size. Buyers should compare the inside drawer dimensions, confirm trim requirements, and review manufacturer guidance before final purchase.

Review buyer questions on drawer fit

Order the right drawer insert

Rev-A-Shelf cutlery tray is a practical choice when you need a white drawer insert with stated dimensions and trim-to-fit flexibility. Before ordering, confirm the inside drawer width, depth, and vertical clearance, and verify whether trimming will be required for your drawer box. The verified listing identifies the tray insert and notes the protective coating shipped on RSCT Series trays. If you are ordering for multiple cabinets, also confirm whether you need broken quantity or full box quantity for the job.