Rev-A-Shelf GCT Series 17-1/2"Wx21-1/4"Dx2-3/8"H Silver Cutlery Tray Insert, -GCT-3S-52

Choose a Rev-A-Shelf cutlery tray

Rev-A-Shelf cutlery tray gives kitchen drawers a defined place for forks, spoons, knives, and other everyday flatware. This cutlery tray insert is a standard plastic drawer insert from Rev-A-Shelf Corporation, made from heavy gauge plastic and finished in glossy silver. The silver cutlery tray measures 17-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Product data states that these trays can be trimmed to accommodate drawer dimensions, which helps when a drawer opening needs a closer fit. The rev a shelf tray ships with a clear protective coating that should be peeled off before use. Buyers searching revashelf organizers or a cutlery divider for a kitchen drawer can use these verified dimensions as the first fit check.

Use this cutlery tray for order

• 17-1/2 inch width - The cutlery tray insert is sized for drawers that can accept this width or a trimmed fit where appropriate.
• 21-1/4 inch depth - The Rev-A-Shelf drawer insert provides front-to-back coverage that can help reduce loose utensil movement in deeper drawers.
• 2-3/8 inch height - The tray depth supports organized storage while reminding buyers to confirm vertical drawer clearance before ordering.
• Glossy silver finish - The silver cutlery tray gives a clean, visible layout that can coordinate with modern kitchen interiors.
• Heavy gauge plastic construction - Rev-A-Shelf uses heavy gauge plastic for a sturdy drawer insert intended for repeated kitchen use.
• Trim-to-fit design - Product data states these standard plastic drawer inserts can be trimmed to accommodate drawer dimensions.
• Clear protective coating included on shipment - The tray ships with a protective film that should be peeled off before use to reveal the finished surface.
• Rev-A-Shelf cutlery tray format - This product type is built to separate cutlery and help keep common utensils easier to sort and access.

Confirm cutlery tray insert fit details

Key specs to confirm: This cutlery tray insert is listed at 17-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Before ordering, measure the actual inside drawer width, inside drawer depth, and inside drawer height. Product data states the tray can be trimmed to accommodate drawer dimensions, but buyers should confirm how much trimming is appropriate for their installation and whether drawer hardware or box construction affects fit. This is a plastic drawer insert, not a powered or mechanical product, so electrical, load, and compliance details are not provided here and should be confirmed with the manufacturer or technical documentation if needed.

What's included: Verified product data identifies one Rev-A-Shelf GCT Series glossy silver cutlery tray insert. A clear protective coating is applied for shipping and should be peeled off before use.

What to verify before ordering: Confirm your drawer's inside dimensions, required tray orientation, needed trim amount, and whether the 2-3/8 inch tray height clears the drawer box and any contents stored above or nearby. Confirm finish preference and manufacturer guidance before cutting or installing.

Compare this Rev-A-Shelf drawer insert

Use a cutlery divider in busy drawers

A cutlery divider is often chosen when a kitchen drawer collects mixed flatware, serving pieces, and loose utensils that shift every time the drawer opens. In that setting, a Rev-A-Shelf drawer insert gives the buyer a defined organizer format instead of relying on separate bins or makeshift dividers. This product is a standard plastic cutlery tray insert from Rev-A-Shelf Corporation, and the verified dimensions of 17-1/2 inches wide by 21-1/4 inches deep by 2-3/8 inches high give installers a clear starting point for drawer planning.

For cabinet shops, remodelers, and serious DIY buyers, the practical value is straightforward. A silver cutlery tray helps assign space for daily-use items so the drawer is easier to maintain. The heavy gauge plastic construction matters because drawer organizers are handled often, cleaned often, and expected to hold shape in normal kitchen use. Product data also states that these drawer inserts can be trimmed to accommodate drawer dimensions. That can be useful when a drawer opening is close to the listed size but not exact.

Buyers searching rev a shelf, revashelf, RSGCT-3S-52, RSCT3W, or RSGCT3W may be comparing finish options or trying to match a prior tray style. The key is to confirm the exact inside drawer measurements instead of relying only on nominal cabinet size. If the drawer has unusual side construction, undermount hardware, or interior obstructions, those conditions should be checked before trimming or placing the tray. The protective coating shipped on the tray is another practical detail. Peel it off before use so the glossy silver surface is fully exposed.

This product type works well for kitchens where flatware needs a dedicated location, for replacement of a worn plastic organizer, or for new drawer layouts in cabinet installations. If the drawer will hold oversized serving tools or specialty utensils, buyers should verify whether the compartment arrangement suits that mix, since the exact internal compartment layout is not provided in the verified data.

Compare plastic cutlery tray options carefully

When buyers compare plastic cutlery tray options, the most useful differences usually come down to verified dimensions, material, finish, and whether the tray can be adapted to the drawer. This Rev-A-Shelf cutlery tray gives clear information on all of those points. It is a heavy gauge plastic drawer insert in glossy silver, and product data states it can be trimmed to accommodate drawer dimensions. That helps buyers evaluate fit with less guesswork.

Another useful comparison point is installation simplicity. A standard drawer insert is generally easier to place than a built-in organizer system because the buyer can focus first on inside drawer measurements and height clearance. In this case, the 2-3/8 inch height is important because it affects whether the tray sits comfortably in the drawer without interfering with drawer operation or nearby contents. The protective shipping film also helps preserve the finish until installation or final placement.

Brand consistency matters as well. Rev-A-Shelf is the verified brand on this product, and the listing identifies it as part of the GCT Series standard plastic drawer inserts. For buyers who already use Rev-A-Shelf organizers, that can make product identification simpler when matching a new tray to an existing cabinet project. If a buyer is comparing this tray to another organizer, the safest approach is to compare actual inside drawer dimensions, tray depth, tray height, trim requirements, and finish preference. If any install detail is not shown in the product data, it should be confirmed before purchase rather than assumed.

Ask fit questions before ordering

Order the right silver cutlery tray

cutlery tray insert selection is easiest when the drawer opening is measured first and the product details are matched to that space. This Rev-A-Shelf drawer insert is a glossy silver, heavy gauge plastic tray listed at 17-1/2 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Verified data confirms one tray and a protective coating that should be removed before use. Before purchase, confirm inside drawer dimensions, required trim amount, tray height clearance, and whether this cutlery divider matches the way the drawer will be used.