Choose a Rev-A-Shelf cutlery tray

Rev-A-Shelf cutlery tray gives you a defined place for flatware inside a kitchen drawer while keeping a clean, uniform layout. This cutlery tray insert is a glossy silver plastic drawer insert from Rev-A-Shelf Corporation, made for drawer organization where a standard tray size is needed. The tray measures 21-7/8 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Product data also states that these cutlery divider trays can be trimmed to accommodate drawer dimensions, which helps when the drawer opening is close but not exact. The Rev-A-Shelf GCT Series tray is made of heavy gauge plastic and ships with a clear protective coating that should be peeled off before use. Buyers searching rev a shelf or revashelf drawer organizers can use this exact model reference, RSGCT-4S-52, to match the silver finish and listed size.

See how this drawer insert helps

• 21-7/8 inch width - Helps buyers match the Rev-A-Shelf drawer insert to wider drawer layouts before trimming or installation.
• 21-1/4 inch depth - Supports better front-to-back use of drawer space for flatware and similar kitchen utensils.
• 2-3/8 inch tray height - Gives a clear depth reference when checking drawer side height and interior clearance.
• Glossy silver finish - Provides a consistent appearance for buyers who want a silver cutlery tray inside modern kitchen drawers.
• Heavy gauge plastic construction - Gives the cutlery tray insert a sturdy molded form for everyday drawer organization.
• Trim-to-fit design - Lets installers adapt the plastic drawer insert to drawer dimensions when a standard size needs adjustment.
• Clear protective coating included from shipment - Helps protect the tray surface in transit and should be removed before use.
• Rev-A-Shelf GCT Series cutlery tray - Gives buyers a clear brand and series reference when matching existing drawer inserts or reordering.

Confirm cutlery tray insert fit details

Key specs to confirm: This cutlery tray insert is listed at 21-7/8 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Before ordering, measure the actual interior drawer width, interior depth, and available sidewall height, not just the cabinet opening. Product data states that these trays can be trimmed to accommodate drawer dimensions, so confirm where trimming is acceptable and how much material can be removed without affecting the compartments you need. If your project has any special clearance, material, or installation requirements, confirm those with the manufacturer or technical documentation. Safety, load, compliance, and any certification details are not provided in the verified product data and should be confirmed separately if required for your project.

What's included: Verified data identifies one Rev-A-Shelf GCT Series glossy silver cutlery tray insert with a clear protective coating applied for shipment. Additional hardware or accessories are not specified in the verified data.

What to verify before ordering: Confirm drawer interior dimensions, confirm the needed tray color, confirm that a trim-to-fit plastic drawer insert suits your installation method, and confirm that the compartment layout meets your flatware storage needs.

Use a silver cutlery tray well

Match this cutlery tray to daily use

A silver cutlery tray is often chosen when the goal is simple drawer organization without moving to a custom wood insert. For a kitchen remodel, rental unit refresh, or replacement of a worn organizer, this Rev-A-Shelf drawer insert gives buyers a standard plastic format with stated overall dimensions and a known brand reference. That matters when a contractor, cabinet shop, or serious DIY buyer needs a tray that can be measured, compared, and ordered without guessing about the basic form factor.

One common pain point is a drawer that is close to standard size but not exact. Verified product data states that Rev-A-Shelf CT Series standard plastic drawer inserts can be trimmed to accommodate drawer dimensions. That makes this cutlery tray insert useful when the drawer interior is slightly oversized or needs a controlled fit adjustment. Buyers should still measure the inside of the drawer carefully and confirm that trimming will not remove needed compartment space. If exact trim allowances are important, those details should be verified with manufacturer documentation before cutting.

Another common issue is depth mismatch. A tray may look correct by cabinet width but fail once the drawer box depth or hardware clearance is checked. This model is listed at 21-1/4 inches deep and 2-3/8 inches high, so those numbers should be compared to the true interior dimensions of the drawer box. Installers should also confirm that the drawer can close freely with the tray in place and that stored utensils will sit below the top edge where required.

The glossy silver finish also serves a practical purpose for buyers trying to match existing organizers or maintain a consistent interior look across several drawers. If you are replacing a damaged cutlery divider or adding organization to a new kitchen drawer, using the exact RSGCT-4S-52 reference can help avoid ordering the wrong color or tray size. The clear protective coating applied for shipping is another point worth noting, because the tray appearance should be evaluated after that film is removed.

Compare this drawer insert with generic trays

When comparing a branded drawer insert with a generic tray, buyers usually focus on three things: known dimensions, material description, and whether the product is intended to be trimmed. This Rev-A-Shelf cutlery tray provides all three in the verified data. The listed width, depth, and height give a clear starting point for fit checks. The heavy gauge plastic description gives a defined material reference. The trim-to-fit statement gives installers a practical path when the drawer is not an exact match.

Generic trays can still work, but they are often harder to evaluate if dimensions are loosely stated or if the material and fit options are unclear. A product with a specific manufacturer part number, brand, and series is easier to reorder later, easier to match across multiple drawers, and easier to document on a cabinet hardware schedule. For trade buyers, that consistency reduces confusion during purchasing and installation.

This product is also straightforward in its intended use. It is a cutlery tray insert in glossy silver for drawer organization. It is not presented as a powered accessory, a load-bearing mechanism, or a specialty compliance item. That keeps the buying decision focused on drawer fit, tray depth, trim suitability, and finish preference. If your application involves unusual drawer construction, commercial requirements, or exact compartment needs, those points should be confirmed before ordering rather than assumed from category-level descriptions.

Ask fit questions before ordering

Order the right drawer insert

Drawer insert selection is easier when the size, brand, and finish are clear. This Rev-A-Shelf drawer insert is a glossy silver cutlery tray with verified dimensions of 21-7/8 inches by 21-1/4 inches by 2-3/8 inches, and it ships with a protective coating to remove before use. Before purchase, confirm the interior drawer measurements, confirm whether trimming is needed, and confirm that the included tray format matches your storage layout. Those checks help you order the right cutlery tray insert the first time.