
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf cutlery tray is a white cutlery tray insert made for drawer organization in kitchen and bath cabinet applications. This Rev-A-Shelf drawer insert measures 21-7/8 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. The tray is made of heavy gauge plastic and is part of the GCT Series from rev a shelf. A clear protective coating ships on the tray and should be peeled off before use. This glossy white cutlery tray can be trimmed to accommodate drawer dimensions, which helps when a standard size needs slight adjustment. Buyers looking for a cutlery divider or plastic drawer insert can use this product to separate utensils and keep drawer contents easier to sort and access.
Key specs to confirm: This cutlery tray is listed at 21-7/8 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Before ordering, measure the actual interior drawer width, depth, and side-wall clearance, not just the cabinet opening. Because this Rev-A-Shelf drawer insert can be trimmed to accommodate drawer dimensions, confirm how much adjustment your drawer needs and whether your installer is prepared to trim a heavy gauge plastic tray cleanly. If drawer slides, internal hardware, or unusual drawer box shapes reduce usable space, check those points carefully. Safety, load, compliance, and any unlisted installation details should be confirmed with the manufacturer or technical documentation.
What's included: Verified data confirms one Rev-A-Shelf GCT Series glossy white cutlery tray insert with a clear protective coating applied for shipment. Included hardware or templates are not specified and should be confirmed before purchase.
What to verify before ordering: Confirm interior drawer measurements, required tray orientation, trim needs, drawer box squareness, and whether any slide hardware or obstructions reduce usable depth or width. Also confirm that the listed white glossy finish is the color you want for the project.
A cutlery tray is often chosen when a standard kitchen drawer has become a mixed storage space for forks, spoons, serving tools, and small utensils. In that setting, a drawer insert helps create fixed sections so items do not slide together every time the drawer opens or closes. This Rev-A-Shelf cutlery tray is built for that kind of practical organization. The verified dimensions give buyers a clear basis for checking fit, and the 2-3/8 inch height helps keep contents contained inside the tray area.
For remodel work, replacement projects, or new cabinet setups, buyers often need a white cutlery tray insert that looks clean inside a drawer and can still be adjusted to suit the actual drawer box. This product is described as trim-capable, which matters when a drawer is close to standard size but not exact. A professional installer or serious DIY buyer can use that flexibility to adapt the tray to the drawer dimension, but the amount and method of trimming should be confirmed before purchase because exact trim allowances are not listed in the verified data.
The heavy gauge plastic construction also matters in everyday use. A plastic drawer insert made from a heavier material can help the tray hold its shape during repeated loading and unloading of utensils. For buyers comparing a cutlery divider against loose organizers, a formed tray can provide a more consistent layout inside the drawer. The clear protective coating is another useful shipping detail because it protects the glossy white surface before the tray goes into service. The coating should be peeled off before use so the tray presents the intended finish.
This revashelf tray also fits buyers who want a standard product rather than a custom fabricated insert. If your drawer is close to the listed 21-7/8 inch by 21-1/4 inch size, this Rev-A-Shelf drawer insert may reduce guesswork compared with piecing together several small organizers. If your drawer has unusual corners, slide brackets, or other internal obstructions, those details should be measured and confirmed first.
When buyers compare one cutlery tray with another, the most useful differences are usually material, size, finish, and whether the tray can be adapted to the drawer. This Rev-A-Shelf cutlery tray gives verified information in all of those areas. It is a heavy gauge plastic drawer insert, it has a glossy white finish, and it is listed with exact width, depth, and height dimensions. It is also described as trim-capable, which can be important when a drawer is slightly off from a standard opening.
Another useful comparison point is product clarity. Some organizers are sold with limited dimensional detail, which makes fit harder to judge. Here, the listed dimensions make it easier to compare the tray against the true inside size of a drawer. The product is also identified clearly as a GCT Series cutlery tray insert from Rev-A-Shelf Corporation, which helps when matching an existing project standard or replacing a similar tray in a multi-drawer kitchen.
For buyers deciding between a fixed tray and smaller loose bins, a one-piece cutlery tray can offer a more stable layout. For buyers deciding between color options, this version is specifically the glossy white model. For buyers deciding between standard and custom organization parts, this tray sits in the standard insert category but still allows trimming to accommodate drawer dimensions. That balance can be useful in cabinet work where consistency matters, but exact fit still needs to be checked on site. As with any drawer insert, the key is to verify usable interior dimensions, not nominal cabinet size, before ordering.
This Rev-A-Shelf cutlery tray fits drawers that can accept its 21-7/8 inch width, 21-1/4 inch depth, and 2-3/8 inch height, subject to actual interior clearance.
This white cutlery tray insert is described as trim-capable to accommodate drawer dimensions. Confirm trim amount and method before installation.
This Rev-A-Shelf drawer insert is made of heavy gauge plastic.
This cutlery tray ships with a clear protective coating that should be peeled off before use.
This cutlery tray should be matched to the actual interior drawer dimensions, because slides and drawer box construction can reduce usable space.
This product is a glossy white cutlery tray based on the verified product name and description.
Included hardware is not specified in the verified data, so those items should be confirmed before ordering.
This Rev-A-Shelf drawer insert is listed under kitchen and bath cabinet accessories, but the drawer must still match the required interior dimensions.
This drawer insert should be installed by following manufacturer installation guidance and local building requirements where applicable.
white cutlery tray insert buyers should focus on fit first, then finish, then any trimming needed for the drawer box. This Rev-A-Shelf cutlery tray includes the tray insert itself and a protective coating for shipment, with exact overall dimensions listed to support measuring. Before purchase, confirm the inside drawer width, depth, height clearance, and any obstructions from slides or hardware. If your project needs a glossy white Rev-A-Shelf drawer insert that can be trimmed to accommodate drawer dimensions, this model gives a clear starting point for accurate ordering.
This Rev-A-Shelf drawer insert is a practical choice for organized cutlery storage when your drawer dimensions align with the listed tray size. The heavy gauge plastic body, glossy white finish, and trim-capable design support standard cabinet projects and replacement work. Confirm what is included, verify actual interior drawer clearance, and check whether any trimming or special installation steps apply before placing the order.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSGCT-4S-52 Mfr# GCT-4S-52 | Rev-A-Shelf GCT Series 21-7/8"Wx21-1/4"Dx2-3/8"H Silver Cutlery Tray Insert, -GCT-4S-52 | ||||
Sold in: 1 Each | RSCT4W Mfr# CT-4W-10 | Rev-A-Shelf CT Series 21-7/8"Wx21-1/4"Dx2-3/8"H White Cutlery Tray Insert, -CT-4W-10 | ||||
Sold in: 10 Each | RSDPCT-4W-10 Mfr# CT-4W-10 | Rev-A-Shelf CT Series 21-7/8"Wx21-1/4"Dx2-3/8"H White Cutlery Tray Insert, -CT-4W-10 | ||||
Sold in: 1 Each | RSCT4A Mfr# CT-4A-52 | Rev-A-Shelf CT Series 21-7/8"Wx21-1/4"Dx2-3/8"H Almond Cutlery Tray Insert, CT-4A-52 |