Spring loaded gate caster is designed to support gates and doors that travel over uneven surfaces, so the wheel can follow minor dips and rises while helping the gate move more smoothly. This DH Casters swivel caster uses a 4 inch hard rubber wheel, which rolls on firm outdoor or indoor surfaces while keeping the rolling contact area relatively compact for tight clearances. The caster is rated for a 200 lb load capacity, so it can carry substantial gate weight within that limit. A zinc plated finish on the caster components provides a basic layer of protection in typical residential and industrial environments. The caster uses a double ball raceway, which lets the swivel action stay smoother under load for easier directional changes at the hinge end or latch end of the gate.
This bracket mount caster uses a dedicated mounting bracket so it can be fastened directly to a gate or door frame structure. The bracket spacing size is 2-1/4 inches, which defines the mounting footprint and helps determine where it will sit relative to frame members or bottom rails. With its 200 lb load capacity, the caster is suited to applications where that load rating aligns with the supported portion of the gate weight. The 4 inch hard rubber wheel and 1-1/4 inch tread width establish the rolling height and contact area, which affects how the gate clears the ground along its full swing or slide. The swivel design lets the caster follow the movement path without needing manual alignment once mounted correctly.
This DH Casters swivel caster is described for applications on residential gates and industrial doors, so it is suited to openings that cycle frequently during normal property access. The spring loaded design is intended for uneven surfaces, letting the wheel travel up and down relative to the bracket so the gate frame sees less shock when meeting surface changes. On residential gates, the 4 inch hard rubber wheel helps the bottom edge travel over irregular driveways or walkways while staying compact under the frame. In industrial door use, the 200 lb load capacity supports heavier sections of the structure within that rating, so the caster can share weight with hinges and guides. The zinc plated finish aligns with these environments, where metal components are commonly exposed to air and dirt during regular operation.
The 4 inch wheel diameter and 1-1/4 inch tread width set a balance between maneuverability and load support, which matters when aligning the caster under a gate where clearance and weight both count. Because the wheel is hard rubber, it helps keep rolling resistance predictable on firm surfaces, so the gate motion feels more consistent day to day. The double ball raceway in the swivel section supports smoother rotation when the gate changes direction, which reduces the effort needed to start or stop movement at the opening. The 2-1/4 inch bracket spacing size defines how the bracket seats against framing members, helping layout stay repeatable from one installation to another using the same caster. The spring loaded function is described for uneven surfaces, which means the caster can continue carrying load as the ground height shifts, helping reduce stress on hinges and frame joints.
This gate caster is described for residential gates and industrial doors, so it serves swinging or moving openings that need rolling support along the ground during normal operation.
The DH Casters swivel caster has a 200 lb load capacity, so it is suited to gate or door installations where the supported portion of the structure stays within that rating.
The caster uses a 4 inch diameter wheel with a 1-1/4 inch tread width made from hard rubber, which provides a firm rolling surface on typical firm ground.
This spring loaded gate caster uses a bracket mounting type with a 2-1/4 inch bracket spacing size, so it attaches using that footprint on the gate or door frame.
The caster is described as spring loaded for uneven surfaces so the wheel can move relative to the bracket as the ground height changes, helping the gate continue rolling smoothly.
This DH Casters bracket mount caster is zinc plated, which provides a protective metal finish suitable for typical residential and industrial environments.
The DH Casters swivel caster with 4 inch hard rubber wheel, 200 lb load capacity, and spring loaded design provides rolling support for residential gates and industrial doors on uneven surfaces. The bracket mount with 2-1/4 inch bracket spacing size defines a clear mounting footprint for gate or door frames. With zinc plated components and a double ball raceway, it keeps swivel and rolling functions aligned with everyday access use. For projects that match these described conditions, this spring loaded gate caster offers a defined set of dimensions and ratings to build into the gate or door layout.