Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Spring-loaded gate casters are designed to support gates and doors that travel over uneven surfaces, so the wheel can follow minor highs and lows while the gate keeps a more consistent swing path. This DH Casters swivel caster uses a 5 inch hard rubber wheel, which rolls with a firm feel and helps maintain control when guiding residential gates or industrial doors. The caster is rated at a 200 lb load capacity, giving you a clear working limit when sizing support for heavier gate panels. The bracket mount product class places the load directly over a dedicated mounting bracket, which helps transfer weight cleanly into the gate frame. A zinc plated finish on the assembly provides a protective metallic surface, which helps the caster stand up to typical outdoor or shop environments where gates and doors operate every day.
This bracket mount caster belongs to the bracket mount product class, so the wheel assembly is carried on a mounting bracket that fastens directly to the structure of the gate or door. A bracket spacing size of 2-1/4 inches defines the spacing between bracket features, which guides how it aligns to the chosen mounting area on the frame. The swivel caster configuration allows the wheel to rotate around a vertical axis, which lets the gate or door change direction smoothly as it opens and closes. The zinc plated finish covers the bracket and raceway surfaces, which provides a protective metallic layer in typical gate and door environments. Together, these details create a mounting approach that supports predictable swing motion where alignment and repeatable travel are important.
This DH Casters swivel caster with 5 inch hard rubber wheel is described for applications on residential gates and industrial doors, so it is suited to hinged barriers that rely on a rolling support point at the free end. The wheel diameter of 5 inches gives useful ground clearance for that support point, helping the gate edge ride over ordinary uneven surfaces near driveways or shop entries. With a tread width of 1-1/4 inches, the caster presents a narrow contact line, which fits well in tighter approach areas along fences or doorway thresholds. The hard rubber material lets the wheel run with a firm feel over hard ground, which is common around residential openings and industrial access points. A zinc plated, double ball raceway in the swivel section helps the caster turn around the vertical axis, which keeps the wheel tracking as the gate or door sweeps through its opening arc.
The spring-loaded design of this gate caster allows the wheel to move relative to the mounting bracket, which helps keep the wheel in working contact when the ground under the gate edge rises or falls slightly. That movement supports more consistent gate travel, because the spring action continues to share weight even as the ground contour changes. The 200 lb load capacity sets a defined support range for the gate or door edge, which aids in planning how much weight this caster can take in regular service. The bracket spacing size of 2-1/4 inches provides a fixed spacing measurement on the bracket, which guides how it lines up with the structural members of a gate frame. The double ball raceway in the zinc plated swivel section distributes the turning load across two ball paths, which helps the caster rotate smoothly as the gate or door opens and closes many times.
The C-GSL5 caster uses a hard rubber wheel, which provides a firm rolling surface suited to common hard ground around residential gates and industrial doors.
This spring-loaded gate caster has a 200 lb load capacity, which defines the working weight it is intended to support at the gate or door edge.
The DH Casters swivel caster has a 5 inch wheel diameter and 1-1/4 inch tread width, which sets the height and ground contact width for the gate support point.
The spring-loaded design lets the wheel move relative to the bracket, which keeps contact on uneven surfaces so gate travel stays more consistent.
The C-GSL5 caster is a bracket mount caster with a 2-1/4 inch bracket spacing size, which provides a defined interface for fastening to a gate or door frame.
This spring loaded gate wheel is described for applications on residential gates and industrial doors, so it suits hinged barriers that need rolling edge support.
The DH Casters swivel caster with 5 inch hard rubber wheel and spring-loaded action offers a defined 200 lb load capacity and bracket mount design for residential gates and industrial doors. When a gate or door edge needs rolling support across uneven surfaces, the 5 inch wheel diameter, 1-1/4 inch tread width, and spring-loaded bracket help maintain contact and smoother travel. For projects that match its bracket spacing size and load rating, this C-GSL5 caster provides a clearly specified option for supporting daily gate and door movement.