DH Casters Rigid Caster With 3-1/2" Thermoplastic Wheel No Brake, Plate Mount 220lb Capacity - C-LM35P1BMR

DH Casters Rigid Caster For Demanding Cart Use

DH Casters rigid caster with 3-1/2 inch thermoplastic wheel gives shop carts and equipment a dedicated fixed-方向 wheel that tracks straight, which helps keep heavily loaded carts moving predictably in aisles and tight service runs. The 220 lb load capacity rating means each caster is designed to support substantial weight on industrial and institutional equipment, allowing carts and dollies to carry heavier loads without overstressing the wheel assembly. A blue TPR wheel provides a non-marking wheel surface, so floors in medical, lab, food service, and warehouse environments stay cleaner and more professional-looking during daily use. The plate mount design matches plate mounted casters commonly used on bread racks, moving dollies, automotive equipment, and electrical equipment, giving installers a straightforward way to spec or match hardware across a fleet of carts and fixtures.

Key DH Casters Rigid Caster Working Advantages

• Full double ball bearing heat-treated raceways provide a smooth swivel interface in the caster frame, which reduces rolling effort under load and supports consistent movement in demanding industrial and institutional applications.
• The axle and nut wheel assembly creates a secure wheel connection to the caster frame, which supports the wheel during repeated rolling cycles and helps maintain alignment over time on shop carts and equipment.
• Zinc plating on the caster components adds corrosion resistance, which helps the caster perform in environments such as food service equipment and warehouse carts where moisture or cleaning routines are common.
• The 3-1/2 inch blue TPR wheel with 1-1/4 inch tread width offers a non-marking wheel surface, which matters where medical and lab carts or bread racks roll across finished floors that need protection from marks.
• The rigid caster configuration with plate mount supports straight-line tracking on carts and moving dollies, which simplifies control when units are pushed along predictable routes in industrial and institutional facilities.

Plate Mount Caster Fit And Installation Details

This plate mount caster uses a plate size of 2-3/8 inches by 3-5/8 inches, giving installers defined mounting dimensions when aligning the caster to cart frames and equipment bases. The plate mounted casters layout supports attachment to flat steel or wood structures commonly seen on shop carts and warehouse carts, allowing a stable footprint for transporting heavy loads. With a wheel diameter of 3-1/2 inches and a tread width of 1-1/4 inches, the caster presents a compact profile that works well under bread racks, medical and lab carts, and food service equipment where overall working height and clearance matter.

Using This Plate Mounted Caster In Real Workflows

Where This Blue TPR Rigid Caster Performs Best

This DH Casters rigid caster with blue TPR wheel is specified for shop carts and equipment, so it fits day-to-day movement of tools and materials across workshop floors as loads move between workstations. The same caster is listed for medical and lab carts, relating its non-marking wheel and controlled rolling to environments where cleanliness and floor appearance support routine operations. Food service equipment and warehouse carts are also named applications, meaning this caster is built for frequent rolling in storage aisles, prep areas, and loading zones where carts must remain maneuverable when fully loaded. Bread racks, automotive equipment, electrical equipment, and moving dollies round out the applications list, tying this caster to a wide range of handling and service carts that need consistent straight-line tracking from a rigid wheel position.

Why Dimensions, Load Rating, And Design Drive Results

The 220 lb load capacity directly influences how carts can be configured, because each caster can carry significant weight without exceeding its rating on industrial and institutional applications. A 3-1/2 inch wheel diameter balances obstacle negotiation and low overall cart height, which matters when equipment must clear thresholds yet stay at a workable loading level. The 1-1/4 inch tread width offers a stable contact patch, helping distribute weight across the floor while the non-marking wheel protects surfaces in medical, lab, food service, and warehouse settings. Full double ball bearing heat-treated raceways in the caster structure support smooth rolling under these loads, which can reduce strain on personnel moving bread racks or moving dollies. The plate size of 2-3/8 inches by 3-5/8 inches ties the caster to a common plate mount footprint, helping keep mounting points consistent when specifying DH Casters rigid caster replacements across shop carts and equipment.

Common DH Casters Rigid Caster Buyer Questions

Select This Plate Mount Caster For Cart Duty

The DH Casters rigid caster with 3-1/2 inch blue TPR wheel, 220 lb load capacity, and 2-3/8 by 3-5/8 inch plate mount gives cart builders and maintenance teams a defined solution for shop carts, medical and lab carts, warehouse carts, and other listed applications. Using this non-marking wheel rigid caster across bread racks, automotive equipment, electrical equipment, and moving dollies supports consistent performance and simplifies standardization on a single plate mounted casters specification.