DH Caster 3-1/2" Plate Mount Swivel Caster, Polyurethane, No Brake, 260 lb, C-LM35P1PUS

DH Casters Swivel Caster For Shop And Cart Use

DH Casters swivel caster with 3-1/2 inch polyurethane wheel gives carts and equipment a compact wheel that supports up to 260 lb, so shop and facility loads move on a small footprint without overbuilding the mounting area. The plate mount design matches plate mounted casters workflows, so installers can use a defined plate footprint instead of drilling individual holes on every project. A swivel type caster lets carts change direction easily, which helps when equipment must move through tight aisles or around benches. The blue solid polyurethane wheel tread works as a non-marking wheel, so floors stay cleaner when carts roll across finished surfaces. This caster sits in the builders hardware and plate mounted casters class, so it fits naturally into hardware layouts for carts, dollies, and material handling projects that already rely on plate mount positions.

Key Caster Details That Support Daily Use

• The 3-1/2 inch wheel diameter shortens overall cart height, which helps when equipment must fit under benches or racks yet still roll smoothly on typical shop and warehouse floors.
• The 1-1/4 inch tread width spreads the load across a wider contact area, which helps carts track steadily under weight instead of digging into the floor surface.
• The blue solid polyurethane wheel construction provides a non-marking wheel, which helps protect finished floors in medical, lab, and food service areas while still handling frequent movement.
• The 2-3/8 inch by 3-5/8 inch plate size defines a standard mounting footprint, which speeds layout when matching caster plates to cart corners or existing weld plates.
• The 260 lb load capacity rating sets a clear per-caster limit, which helps installers calculate total cart capacity based on the number and position of casters used.
• The swivel type configuration allows the wheel to rotate around a vertical axis, which lets operators maneuver shop carts and moving dollies in confined spaces.

Plate Mount Swivel Caster Setup And Fit Details

The plate mount format on this DH Casters swivel caster uses a 2-3/8 inch by 3-5/8 inch plate, so fabricators can size corner plates or angle brackets to that footprint before drilling bolt patterns. A 3-1/2 inch wheel diameter defines the rolling radius, which helps when checking clearance around cart frames, brake housings, or low crossbars. The 1-1/4 inch tread width determines the contact band on the floor, which matters when aligning multiple casters on narrow rails or channel frames. With a 260 lb load capacity, this caster supports medium-duty applications such as shop carts and equipment, medical and lab carts, food service equipment, warehouse carts, bread racks, automotive and electrical equipment, and moving dollies, so planners can assign it confidently within those use ranges.

Using This Medium Caster In Real Applications

Where This 3-1/2 Inch Polyurethane Caster Fits

This medium plate mount caster fits shop carts and equipment where a 260 lb load capacity per caster supports tools, parts, and materials without oversizing the running gear. In medical and lab carts, the blue solid polyurethane wheel and non-marking wheel behavior help maintain clean, professional floors while still moving diagnostic or testing equipment between rooms. Food service equipment and bread racks benefit from the 3-1/2 inch wheel diameter, which rolls over typical kitchen and bakery flooring while keeping rack height manageable. Warehouse carts and moving dollies use the same wheel size and tread width to balance maneuverability with stable rolling under stacked cartons or components. Automotive and electrical equipment carts can use the defined plate size to line up casters on fabricated frames, giving technicians predictable movement around bays.

Why The DH Casters Design Supports Repeatable Movement

The full double ball bearing heattreatedraceways in this caster create a smooth swivel action, which helps operators pivot loaded carts with less effort during frequent repositioning. Heattreated raceways support long term swivel performance, which matters when carts in warehouse carts or medical & lab carts service roll through many cycles each day. An axle and nut wheel assembly secures the 3-1/2 inch blue solid polyurethane wheel, which keeps the wheel aligned within the fork so the 1-1/4 inch tread width stays fully engaged on the floor. Zincplating on the caster components provides corrosion resistance, which helps maintain swivel and rolling function in food service equipment, bread racks, or automotive and electrical equipment environments where moisture or cleaners are present. As a swivel wheel type within builders hardware and plate mounted casters, this unit offers a defined combination of plate size, wheel diameter, and load capacity that supports repeatable layouts across multiple carts and moving dollies in the same facility.

Common Questions About The C-LM35P1PUS Caster

Selecting This Swivel Caster For Your Next Build

The DH Casters swivel caster with 3-1/2 inch blue solid polyurethane wheel, 1-1/4 inch tread width, and 260 lb load capacity combines medium-duty support with a compact profile for carts and equipment. The 2-3/8 inch by 3-5/8 inch plate mount layout, full double ball bearing heattreatedraceways, and zincplating help builders align this C-LM35P1PUS model with shop carts & equipment, medical & lab carts, food service equipment, warehouse carts, bread racks, automotive & electrical equipment, and moving dollies where non-marking wheel performance and repeatable movement are priorities.