Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster with 5 inch polyurethane wheel with brake, plate mount 300 lb capacity - C-LM5P2PUSB is built as a plate-mounted swivel caster for carts and equipment that need controlled movement and reliable positioning. The 5 inch wheel diameter lets carts roll over typical shop and facility floor transitions while still keeping overall equipment height manageable. A 1-1/4 inch tread width concentrates the load into a compact footprint, which helps carts track predictably in aisles. The polyurethane wheel material provides a non-marking wheel surface so finished floors stay cleaner in normal use around woodworking, medical, or food service environments. The integrated brake on this swivel caster allows the wheel to be held in place when a cart needs to stay put during loading, unloading, or work operations.
This caster uses a plate mount design, with a plate size of 3-1/8 inch by 4-1/8 inch, which defines the footprint needed on the cart frame or equipment base for proper mounting. The plate mount setup keeps the load distributed over the mounting area, supporting stability when the caster is carrying up to its 300 lb capacity. Because this unit is a swivel type caster, it rotates around the vertical axis at the raceways, letting a cart change direction without dragging the wheel sideways. The integrated brake works with the wheel to hold position when engaged, which supports safer loading and unloading on slightly sloped or busy work areas.
This caster is specified for shop carts and equipment, so it is suitable for moving tools, parts, and materials between benches and machines. It is also listed for medical and lab carts, where the non-marking polyurethane wheel helps reduce floor marking during frequent repositioning. Food service equipment applications are supported by the corrosion-resistant zinc plating, which helps when carts operate near cleaning solutions and spills. Warehouse carts and bread racks benefit from the 300 lb load capacity, allowing repeated trips with loaded shelves or bins. Automotive and electrical equipment applications take advantage of the 5 inch wheel diameter, which helps roll over cords, small floor joints, and typical service bay surfaces during daily movement. Moving dollies can use this caster when a low-profile, swiveling, braked wheel is needed for handling furniture or equipment.
The full double ball bearing heat-treated raceways support smooth swivel motion under load, which helps operators guide carts accurately through aisles and around obstacles without fighting the wheels. The axle and nut wheel assembly keeps the wheel rotation consistent, which supports predictable pushing effort during repeated trips. A 1-1/4 inch tread width on the polyurethane wheel balances load support and maneuverability, which matters when a cart must both turn sharply and roll straight in longer runs. The non-marking polyurethane tread and zinc plating combination means the caster can roll across finished floors and moisture-prone areas while helping preserve surface appearance. The defined 3-1/8 inch by 4-1/8 inch plate size provides a clear mounting footprint, supporting accurate placement on new builds or when standardizing casters across similar carts. The 300 lb capacity rating on a single caster supports planning for total cart capacity by pairing or grouping casters on a frame to match the intended loaded weight.
The C-LM5P2PUSB model is a DH Casters swivel caster with a 5 inch polyurethane wheel and brake, which supports maneuverable carts that also need positive wheel locking.
This caster has a 300 lb load capacity, allowing it to carry substantial weight on shop carts, warehouse carts, moving dollies, and similar equipment in regular operation.
This unit is a plate mount caster with a plate size of 3-1/8 inch by 4-1/8 inch, which defines the mounting footprint on the cart or equipment frame.
The polyurethane wheel on this caster is non-marking, so regular rolling on shop, medical, or food service floors helps reduce visible streaks and keeps surfaces looking cleaner.
Full double ball bearing heat-treated raceways support smooth swivel action under load, which makes guiding fully loaded carts around corners and in tight spaces more controlled.
This caster is listed for shop carts, medical and lab carts, food service equipment, warehouse carts, bread racks, automotive and electrical equipment, and moving dollies in regular facility workflows.
This DH Casters swivel caster with 5 inch polyurethane wheel with brake, plate mount 300 lb capacity aligns well with carts and equipment used in shops, warehouses, medical, lab, and food service settings. The defined 3-1/8 inch by 4-1/8 inch plate size, non-marking polyurethane wheel, and zinc-plated construction support repeatable performance across these applications. For projects where controlled maneuvering, floor appearance, and consistent rolling under load are critical, this C-LM5P2PUSB caster provides a clearly specified option to match those demands.
Sold In: 1 Each
