DH Caster 5" Plate Mount Swivel Caster, Polyurethane, No Brake, 300 lb, C-LM5P1PUS

DH Casters 5 Inch Polyurethane Swivel Caster Use

DH Casters swivel caster with 5 inch polyurethane wheel is a plate mount caster in the DH Casters builders hardware line. The 5 inch wheel diameter raises equipment enough to roll smoothly while keeping working height manageable for cabinets, carts, and shop fixtures. The plate mount design ties the caster securely into flat surfaces, which helps keep loads stable during movement. This caster is part of a family that offers rigid and swivel types, so it can be matched to installations needing both steering and straight-line tracking. The caster is rated at 300lb capacity, so it supports medium-duty shop and jobsite loads common in woodworking and general fabrication. The wheel uses polyurethane material, which provides a firm rolling surface that handles sustained use in work areas. The hardened raceway and yoke add strength to the swivel section, supporting the stated capacity as the caster is turned under load.

Key Caster Details That Support Daily Work

• The 5 inch wheel diameter allows the caster to roll over typical shop floor transitions while keeping equipment closer to normal working height, which is important when moving cabinets, benches, or mobile machines.
• The plate mount configuration provides a broad mounting surface on the equipment base, which distributes load forces into the frame and helps maintain alignment under the 300lb capacity rating.
• The polyurethane wheel material gives a firm rolling surface suitable for work areas where consistent contact is needed, which supports controlled movement of woodworking carts and fixtures.
• The hardened raceway and yoke construction add strength to the swivel mechanism, which helps the caster track and turn smoothly as loads approach its 300lb capacity.
• The availability of both rigid and swivel types in this caster series allows layouts that combine steering casters with fixed-direction casters, which helps create predictable handling on larger shop bases.

Plate Mounted Swivel Caster Installation Focus

This DH Casters plate mount swivel caster is designed for flat mounting surfaces, so it ties directly into the base of cabinets, carts, and shop-built equipment. The plate mount style spreads the 300lb capacity across a wider footprint, which supports the frame when the caster pivots under load. The 5 inch polyurethane wheel height positions the mounting plate at a practical distance from the floor, which simplifies laying out hole locations relative to corners and cross members on the base. The hardened raceway and yoke hold the swivel section in alignment as the caster is rotated, which matters when equipment is maneuvered in tight aisles. Paired with rigid units from the same family, this swivel caster can form a stable rolling set where steering casters are placed at one end of a cabinet or bench.

Using This 5 Inch Polyurethane Swivel Caster

Where This DH Casters Swivel Caster Works Best

This DH Casters swivel caster with 5 inch polyurethane wheel fits into builders hardware applications where plate mounted casters are preferred on wood or steel bases. The 300lb capacity suits medium-duty mobile cabinets, woodworking carts, and general shop fixtures that carry materials, tools, or small machines. The polyurethane wheel option from the available wheel materials is suited to work environments where a firm rolling surface is needed. Within the caster family, wheel diameter sizes from 3-1/2 inch to 5 inch are offered, and this 5 inch version provides a higher rolling center for better clearance over minor floor variations in work areas. The hardened raceway and yoke for extra strength support applications where the caster is turned frequently while under load.

Details That Support Alignment And Repeatable Results

The plate mount design of this DH Casters unit provides consistent mounting geometry, which helps installers repeat hole patterns across multiple cabinets or fixtures. The 5 inch wheel diameter keeps the swivel section high enough above the floor for free rotation, which maintains smooth directional changes during daily use. The hardened raceway and yoke focus strength at the swivel interface, which supports accurate tracking as the caster pivots under its 300lb capacity. Having rigid and swivel types available in the same caster series lets builders repeat a proven layout, using swivel casters for steering and rigid units for straight-line stability on new projects. Selecting the polyurethane wheel option from the available wheel materials standardizes rolling performance across equipment that must move together around the shop floor.

Common Questions About The C-LM5P1PUS Caster

Choose This Swivel Caster For Plate Mount Projects

The DH Casters swivel caster with 5 inch polyurethane wheel, plate mount, and 300lb capacity aligns well with mobile cabinets, carts, and shop fixtures built around flat bases. The plate mount style supports stable attachment to wood or steel frames, while the 5 inch wheel diameter sets a practical rolling height for everyday use. The polyurethane wheel option and hardened raceway and yoke provide a firm, strong rolling and swiveling interface suited to frequent movement. For projects planned around plate mounted casters in the 3-1/2 inch to 5 inch range, this C-LM5P1PUS model offers a balanced combination of height, capacity, and swivel function.