Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster with 3 inch thermoplastic wheel with brake gives carts and equipment smooth rolling and positive stopping in one component, which helps control movement when positioning loads in tight or busy work areas. The plate mount design matches the plate mounted casters category, so it installs as a medium-duty caster where a flat top plate interface is already laid out on carts or equipment frames. The 220 lb load capacity supports many shop carts and equipment pieces, so a single caster helps carry substantial loads in industrial and institutional settings without oversizing hardware. The wheel type is blue TPR, so the tread combines thermoplastic rubber properties with a defined color, helping match facilities that need a specific wheel material and easy visual identification in service.
The plate mount type on this caster provides a flat mounting interface, so it mates to equipment using a matching plate layout instead of a stem, which is suited to welded or bolted cart bases. The plate size is 2-3/8 inch by 3-5/8 inch, giving a defined mounting footprint that helps align the caster to typical medium-duty plate patterns on carts and moving dollies. The swivel type head allows the caster to rotate under the load, so carts can change direction without dragging wheels sideways, which reduces strain on frames and flooring. The built-in brake works with the 3 inch wheel, so operators can lock movement at the wheel when they need equipment to stay positioned during loading, unloading, or work.
This plate mount caster is listed for shop carts and equipment, so it serves general material handling tasks where medium loads move between work areas on smooth floors. Use on medical and lab carts aligns with the non-marking blue TPR wheel, because the tread avoids marking sensitive floor surfaces in healthcare or laboratory corridors. Food service equipment use matches the corrosion-resistant zinc plating and non-marking wheel, allowing rolling fixtures in kitchens and serving zones to move without leaving marks. Warehouse carts benefit from the 220 lb load capacity per caster, since multiple casters share the load to move boxes, bins, or components between storage and work cells. Bread racks and similar rolling racks use the swivel action and compact 3 inch diameter wheel to maneuver through aisles. Automotive and electrical equipment applications rely on the thermoplastic wheel and plate mount to support tool carts or instrument stands. Moving dollies benefit from the 3 inch diameter and 1-1/4 inch tread width, giving stable support while keeping overall platform height low for loading.
The full double ball bearing heat-treated raceways in the swivel section are designed to carry vertical and side loads while turning, so the swivel stays smooth after repeated pivots in industrial and institutional applications. Heat treatment on the raceways enhances their load-bearing performance, which helps the head resist deformation as carts are pushed, pulled, and rotated. The axle and nut wheel assembly holds the wheel securely on its axle, so the 3 inch blue TPR wheel rolls with less wobble, which promotes straight tracking when pushing equipment down hallways or across shop floors. The blue TPR wheel material combines thermoplastic wheel construction with floor-friendly behavior, so non-marking performance supports facilities that care about clean, unmarked surfaces. The zinc plating on metal parts adds a corrosion-resistant layer, so in environments where carts encounter humidity, cleaning solutions, or food service conditions, the caster resists rust that could otherwise affect swiveling and rolling. Together, the 220 lb load capacity, defined plate size, and non-marking blue TPR wheel give installers a caster that ties rated load support to a specific wheel size and footprint, which simplifies selecting units for carts and equipment within this duty range.
The DH Casters swivel caster uses a 3 inch diameter wheel with a 1-1/4 inch tread width, which keeps carts compact while still offering a stable contact area for loads.
This plate mount swivel caster has a 220 lb load capacity, so each caster can support medium-duty loads on shop carts, warehouse carts, or similar rolling equipment.
The wheel type is blue TPR, a thermoplastic material that provides a non-marking wheel, which helps protect finished floors in medical, lab, or food service environments.
This swivel caster has a brake that works with the 3 inch wheel, so the wheel can be held in place when carts or equipment need to stay stationary during tasks.
The mounting plate size is 2-3/8 inch by 3-5/8 inch, giving a rectangular footprint suited to plate mounted casters on carts, bread racks, and moving dollies.
This non marking TPR caster is used on shop carts and equipment, medical and lab carts, food service equipment, warehouse carts, bread racks, automotive and electrical equipment, and moving dollies.
Choose the DH Casters swivel caster with 3 inch thermoplastic wheel with brake when a 220 lb capacity plate mount unit matches your cart or equipment design, so the blue TPR non-marking wheel, zinc-plated construction, and defined plate size all support everyday rolling tasks.
Sold In: 1 Each
