Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster is a plate mount caster built around a 3 inch gray TPR thermoplastic wheel with a 220 lb load capacity and no brake, so it supports controlled movement on carts that need free-rolling swivel action. The plate mount design with a 2-3/8 inch by 3-5/8 inch plate gives a defined footprint that spreads load into the cart base, which matters when building or retrofitting shop carts and equipment. Full double ball bearing heat-treated raceways in the swivel section provide smooth rotation under load, which helps carts track predictably when pushed or pulled. The axle and nut wheel assembly ties the wheel to the fork in a serviceable way, so the wheel stays aligned during repeated use. Zinc plating on the caster components adds corrosion resistance in typical shop, warehouse, food service, or medical environments where moisture and cleaning are common.
This plate mounted caster uses a 2-3/8 inch by 3-5/8 inch mounting plate, giving installers a clear surface area to match with cart corners or equipment bases when laying out hole patterns. The swivel configuration lets the caster rotate freely around the vertical axis, which helps carts navigate aisles and work areas without dragging wheels. The axle and nut wheel assembly ties the 3 inch wheel to the fork, so the rolling section remains secure once mounted to the cart frame. Full double ball bearing heat-treated raceways in the swivel head support rotation under 220 lb loads, which helps reduce steering effort when a cart is fully built out.
This plate mount swivel caster with a 3 inch gray TPR wheel is specified for shop carts and equipment, so it aligns with typical woodworking or maintenance carts that move tools and supplies between stations. The same caster is listed for medical and lab carts, which means the non-marking gray TPR tread is suited to sensitive floor surfaces in clinical or laboratory corridors. Food service equipment and bread racks are named applications, so the zinc-plated construction and thermoplastic wheel address environments where carts travel through kitchens and storage areas. Warehouse carts and moving dollies are also listed, so the 220 lb load capacity and swivel action support moving cartons or components across larger floor areas. Automotive and electrical equipment applications benefit from the compact 3 inch wheel diameter and plate size, which keep equipment handling carts maneuverable around lifts, benches, and panels.
The 220 lb load capacity rating gives a clear basis for building carts that stay within design limits, which helps maintain swivel performance from the full double ball bearing heat-treated raceways under load. The 3 inch wheel diameter balances low deck height with obstacle negotiation, so carts for shop or warehouse use stay easier to control while still rolling over small joints or thresholds. The 1-1/4 inch tread width focuses load into a modest contact area, allowing the gray TPR non-marking wheel to roll with reduced resistance across smooth surfaces common in medical, lab, and food service settings. Zinc plating on the caster body resists corrosion, which helps swivel and wheel components continue to move freely in industrial and institutional environments that see regular cleaning. The axle and nut wheel assembly anchors the gray TPR wheel in the fork, which supports straight tracking when pushing automotive and electrical equipment carts through turns and narrow aisles.
This swivel caster has a 220 lb load capacity, so cart builders can size total cart ratings by the number of casters used on shop, warehouse, or institutional equipment.
The caster uses a 3 inch wheel diameter with a 1-1/4 inch tread width, which sets overall cart height and influences how easily the cart rolls in tight workspaces.
The gray TPR wheel is non-marking, so it allows carts to move across finished floors in medical, lab, or food service areas without leaving tread marks.
This caster uses a plate mount with a 2-3/8 inch by 3-5/8 inch plate, providing a defined surface for fastening to cart corners or equipment frames.
The caster uses full double ball bearing heat-treated raceways in the swivel section, which support smooth rotation when carrying up to 220 lb per caster.
This caster is listed for shop carts and equipment, medical and lab carts, food service equipment, warehouse carts, bread racks, automotive and electrical equipment, and moving dollies.
The DH Casters swivel caster with 3 inch gray TPR non-marking wheel, 220 lb load capacity, and 2-3/8 inch by 3-5/8 inch plate mount provides a defined specification for shop carts, medical and lab carts, food service equipment, warehouse carts, and moving dollies. Using the C-LM3P1TPS part number helps match this swivel, non-brake configuration whenever a project calls for a plate mounted caster in these industrial and institutional applications.
Sold In: 1 Each
