
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
DH Casters swivel caster is a stemless mount caster designed to carry up to 240 lb, providing a single-wheel solution for medium-duty carts and equipment where reliable rolling and controlled movement are needed in daily use.
The 4 inch wheel diameter lets the caster roll over typical shop, warehouse, and facility floors while keeping overall cart height manageable for handling and loading tasks. The 1-1/4 inch tread width supports the rated load while helping distribute weight across the floor surface.
The gray TPR wheel material creates a non-marking wheel, so the caster moves loads without leaving dark streaks on finished floors in medical, food service, or institutional spaces. This matters where clean floor appearance is part of normal operations.
The swivel design allows the caster to rotate around a vertical axis, so carts can maneuver in tight aisles, work cells, or around equipment, reducing the effort required to change direction when positioning loads.
The integrated brake adds wheel control by holding the wheel when engaged, supporting stable loading, unloading, or stationary use where carts must stay put during work.
The stemless mount configuration with a 3/8 inch stem hole size sets the basic interface for how this caster fits into a cart corner or equipment frame, so fabricators can match hole size to the caster for a snug, supportive fit.
The swivel action lets the caster rotate under load, which is important when operators need to pivot a cart or change direction without lifting or dragging, reducing resistance and helping maintain smoother handling around work areas.
The integrated brake acts directly at the wheel, so once the caster is oriented, the operator can secure the wheel position for loading, unloading, or static tasks, keeping the cart from rolling on flat floors during routine work.
The 4 inch gray TPR wheel with 1-1/4 inch tread width works with the swivel to balance turning response and straight-line tracking, so carts remain controllable whether being pushed through longer warehouse runs or positioned beside benches and equipment.
This stemless mount caster is identified for shop carts and equipment, which means it supports moving tools, parts, or work materials around production or maintenance spaces where repeated repositioning is part of the workflow.
Use on medical and lab carts places the gray TPR non-marking wheel in environments where clean, professional floor appearance is valued, so carts can roll through hallways and rooms without leaving visible wheel marks.
Food service equipment use pairs the 4 inch non-marking wheel and swivel with frequent movement of racks and carts in kitchens or service areas, supporting smooth rolling as loads are shifted between prep, cooking, and serving zones.
Warehouse carts and bread racks are also listed applications, so the 240 lb load capacity and tread width help these carts carry product, trays, or cartons along aisles while the swivel design aids navigating turns and staging areas.
Automotive and electrical equipment applications connect the caster to rolling stands or carts that position components and tools near vehicles or benches, where directional changes and stable stopping are routine requirements.
Moving dollies are another named use, where the caster supports transporting varied loads across floors, with the 4 inch wheel aiding over thresholds or minor floor transitions while keeping deck height relatively low.
The 240 lb load capacity rating helps planners assign the right number of casters under a cart or rack so the structure operates within the intended loading, which supports consistent rolling performance over time in the stated applications.
The 3/8 inch stem hole size gives a clear target for frame drilling or fabrication, so each caster seats uniformly, helping keep cart corners at the same height and improving tracking when carts travel longer distances.
The 4 inch gray TPR wheel dimension influences how the caster handles floor joints or small debris, allowing carts to roll through common facility conditions while maintaining a manageable overall cart height for loading and access.
The 1-1/4 inch tread width spreads the load across a wider contact area than a narrow wheel, which affects how weight is transferred to the floor and supports smoother rolling when carts are fully loaded within the capacity rating.
The swivel style allows the caster to point naturally in the direction of travel, reducing lateral stress on frames and mounts during frequent turns in aisles, corridors, and work cells described in the application list.
The non-marking gray TPR wheel surface matters in medical, lab, food service, and similar institutional spaces, because regular cart traffic can remain compatible with appearance expectations without adding extra floor cleaning cycles.
This DH Casters swivel caster has a 240 lb load capacity, so planners can size cart designs by multiplying that rating across the number of casters used on the equipment.
This caster uses a 4 inch wheel diameter with a 1-1/4 inch tread width, which balances rolling ability with a compact overall height for many carts and racks.
The gray TPR wheel is described as non-marking, so it moves loads across finished floors in medical, lab, and food service areas while helping maintain clean floor appearance.
This caster uses a stemless mount with a 3/8 inch stem hole size, giving fabricators a defined hole dimension to match when building or modifying carts and equipment.
The caster is described for shop carts, medical and lab carts, food service equipment, warehouse carts, bread racks, automotive and electrical equipment, and moving dollies.
The swivel function lets the caster change direction easily, while the brake holds the wheel when engaged, supporting both maneuvering and stable stationary positioning.
This stemless mount DH Casters swivel caster with 4 inch gray TPR non-marking wheel, 1-1/4 inch tread width, brake, 3/8 inch stem hole, and 240 lb capacity delivers the defined details needed to align carts, racks, and dollies with the listed industrial, medical, food service, warehouse, and equipment applications.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CCLM4H1TPS Mfr# C-LM4H1TPS | DH Casters Swivel Caster With 4" Thermoplastic Wheel No Brake, Stemless Mount 240lb Capacity - C-LM4H1TPS | ||||
Sold in: 1 Each | CCLM4P1HDPS Mfr# C-LM4P1HDPS | DH Casters Swivel Caster With 4" Wheel No Brake, Plate Mount 300lb Capacity - C-LM4P1HDPS | ||||
Sold in: 1 Each | CCLM4T4PNSB Mfr# C-LM4T4PNSB | DH Casters Swivel Caster 4" With Brake, Threaded Stem Mount 300lb Capacity - C-LM4T4PNSB |