DH Caster 4" Stemless Mount Swivel Caster, Thermoplastic, No Brake, 240 lb, C-LM4H1TPS

DH Casters Swivel Caster For Shop And Cart Use

DH Casters swivel caster with 4 inch thermoplastic wheel gives carts and equipment a smooth rolling support point, so shop and facility gear can be moved and positioned under a defined 240 lb load rating per caster. The stemless mount design uses a 3/8 inch stem hole interface, so the caster sits directly in a compatible mounting point on the equipment frame for a solid connection. Full double ball bearing heat-treated raceways carry the swivel motion, so the caster can rotate under load with consistent tracking in tight service areas. The axle and nut wheel assembly ties the 4 inch wheel securely to the fork, so the tread runs true around the hub during long pushes across the floor. Zinc plating on the assembly provides corrosion resistance in typical shop, warehouse, and service environments, so the caster structure maintains function when exposed to routine moisture and cleaning.

Stemless Caster Details That Support Daily Work

• The 4 inch wheel diameter rolls over small joints and floor transitions, so typical shop and cart movements stay controlled without excessive effort when starting or stopping.
• The 1-1/4 inch tread width provides a defined contact patch, so the load spreads over more floor area to support the stated 240 lb capacity while limiting point pressure.
• The 240 lb load capacity per caster sets a clear working limit, so cart builders can calculate total support by multiplying by the number of casters used on the equipment frame.
• The gray TPR wheel material forms a non-marking wheel, so floors in medical, lab, food service, and warehouse settings stay free from typical black streaks during normal rolling.
• The swivel type caster head allows full rotation, so carts can pivot and track through aisles and around equipment without complex maneuvering or repeated repositioning.

Stemless Mount And Swivel Function In Use

The stemless mounting type with a 3/8 inch stem hole size lets the DH Casters swivel caster seat into a matching 3/8 inch receiver on carts and equipment, so installers can align the caster centerline directly under frame corners or support points. With the swivel configuration, the caster turns around its vertical axis using full double ball bearing heat-treated raceways, so the wheel follows directional changes smoothly when operators push or pull loaded carts. The 4 inch gray TPR wheel and 1-1/4 inch tread width combine to deliver non-marking contact with the floor, so sensitive surfaces in shops, medical areas, and food service aisles remain clean under typical movements. The zinc-plated body resists corrosion from routine exposure to moisture in warehouse and service environments, so the swivel action and mounting interface stay usable over time.

Using This Caster On Carts And Equipment

Where This 4 Inch Stemless Caster Performs Best

This DH Casters stemless mount swivel unit is specified for applications such as shop carts and equipment, so general woodworking or fabrication carts can move material and tools under the 240 lb load capacity per caster. The same caster is listed for medical and lab carts, so rolling stands and storage units in clinical or lab areas gain non-marking gray TPR wheels that protect floors. It is identified for food service equipment use, so service carts and prep stations can roll through kitchens and serving areas without leaving streaks. Warehouse carts and bread racks are also named applications, so bulk handling and rack movement benefit from 4 inch wheels that turn easily around corners. Automotive and electrical equipment and moving dollies are specified uses as well, so service shops and installers can standardize on this caster across multiple rolling fixtures.

Why Wheel Construction And Swivel Details Matter

The full double ball bearing heat-treated raceways in the swivel head carry both vertical load and turning forces, so the caster rotates smoothly when operators redirect heavy shop or warehouse carts. The axle and nut wheel assembly secures the 4 inch gray TPR wheel inside the fork, so the 1-1/4 inch tread stays aligned and helps maintain straight tracking during longer pushes. With a 240 lb load capacity, each caster can be counted on to support its share of the total equipment weight, so cart designers can plan caster counts and placement to keep loads within stated limits. The non-marking gray TPR wheel composition is specified for use on floors in medical, lab, food service, and warehouse environments, so routine rolling does not transfer dark marks onto finished surfaces. Zinc plating on the caster components provides corrosion resistance in normal shop conditions, so the swivel mechanism and stemless mount connection stay functional after repeated exposure to cleaning processes and ambient humidity.

Common Questions About This DH Casters Swivel Caster

Select This Caster For Cart And Equipment Builds

The DH Casters swivel caster with 4 inch gray TPR non-marking wheel, 1-1/4 inch tread width, and 240 lb load capacity provides a defined specification for shop carts, warehouse carts, and service equipment. The stemless mount with 3/8 inch stem hole size and zinc-plated, double ball bearing swivel head creates a durable rolling point for medical and lab carts, food service equipment, bread racks, automotive and electrical equipment, and moving dollies. Use this C-LM4H1TPS caster where a stemless swivel unit with non-marking gray TPR wheel and stated industrial and institutional applications aligns with your cart or equipment design.