DH Caster 5" Plate Mount Swivel Caster, Moldon Rubber, With Brake, 400 lb, C-MHD5MRSB

DH Casters Swivel Caster 5 Inch For Carts

DH Casters swivel caster 5 inch with moldon rubber wheel and brake gives platform trucks and carts a controlled 400 lb load rating, so material handling setups can be planned around a defined capacity for repeatable movement in busy shop and warehouse aisles. The caster is a plate mount design with a 3-15/16 inch by 4-1/2 inch plate, which creates a broad mounting footprint that spreads load forces into the cart frame. A 5 inch wheel diameter with 2 inch tread width provides a rolling surface sized for typical platform trucks and flatbed carts used around distribution and automotive equipment. The moldon rubber wheel material provides a resilient tread bonded to a solid core, which supports the rated load while offering a cushioned ride that helps parts and containers travel more smoothly across typical warehouse floors.

Key Swivel Caster Details That Support Jobs

• The 400 lb load capacity sets a clear upper limit for each caster, which helps planning when sizing casters for platform trucks, flatbed carts, containers, automotive equipment, distribution carts and warehouse equipment that see frequent movement.
• The 5 inch moldon rubber wheel with 2 inch tread width creates a stable contact patch, which supports carts carrying dense loads while the resilient rubber tread helps equipment roll more smoothly over common concrete or similar surfaces.
• The plate mount design with a 3-15/16 inch by 4-1/2 inch plate spreads loads over a larger area, which helps cart builders create a solid interface between the caster and the frame on heavier-duty applications.
• The swivel type configuration allows the wheel to rotate around a vertical axis, which lets loaded carts track through tighter turns in aisles and around equipment without needing to be repositioned by hand.
• The wheel brake adds a mechanical stop at the caster, which helps keep platform trucks or carts from rolling when they are parked for loading, unloading, or staging near workstations.

Plate Mount Swivel Caster Fit And Setup

This plate mount swivel caster with a 3-15/16 inch by 4-1/2 inch plate is built as a plate mount product class, which means the mounting interface is intended to sit flat against a matching surface on platform trucks, flatbed carts, containers and similar equipment. The 5 inch wheel diameter with a 2 inch tread width sets how high the equipment frame will sit off the floor, so builders can size deck heights across carts in a fleet using this same caster. The 400 lb load capacity is tied to the caster design, so installers can select caster layouts on trucks and carts that align with this rating when positioning units at corners or critical support points.

Using This Heavy Duty Plate Mounted Caster

Where This Moldon Rubber Wheel Caster Fits Best

This heavy duty plate mounted caster is described for applications on platform trucks, flatbed carts, containers, automotive equipment, distribution carts and warehouse equipment, so it slots naturally into material handling projects in those environments. The 5 inch moldon rubber wheel with 2 inch tread is sized for these carts, which lets builders and maintenance teams standardize on a common wheel size and tread style across trucks that handle similar routes and loads. The swivel type layout suits carts that need to navigate around machinery or racking, because the caster allows the wheel to pivot as the handle is steered. The integrated brake at the wheel provides a way to hold these trucks when they are staged at loading areas, which is useful when containers are being moved on and off the deck in active shop spaces.

Why The C-MHD5MRSB Design Supports Repeatable Movement

The C-MHD5MRSB caster is described as designed above industry standards, which signals that the construction choices are aimed at demanding cart use where consistency over time matters to workflows. Full doubleball heat treated raceways form the turning interface for the swivel, so the caster is built to keep the swivel motion smooth under dynamic loads as trucks are moved through distribution or warehouse paths. Double-welded legs tie the wheel fork back into the plate, which provides a rigid support structure around the 5 inch moldon rubber wheel so that side loads from turning and docking are directed into the mount. A nut-and-bolt kingpin secures the swivel assembly, creating a serviceable mechanical joint at the pivot that holds the swivel components in alignment. Zinc plating on the metal surfaces adds a protective coating, which helps the caster maintain its function in typical indoor warehouse and automotive equipment environments where humidity or occasional contact with industrial atmospheres exists. Zerk fittings for grease are built into the design to feed lubrication to bearings, which supports ongoing smooth swivel and wheel rotation that keeps carts rolling predictably through daily use.

Common Questions About This DH Casters Swivel Caster

Select This Caster For Plate Mount Cart Builds

The DH Casters swivel caster with 5 inch moldon rubber wheel, wheel brake and 400 lb capacity gives platform trucks, flatbed carts, containers, automotive equipment, distribution carts and warehouse equipment a defined rolling component. The plate mount design with a 3-15/16 inch by 4-1/2 inch plate and swivel action lets builders match mounting surfaces while maintaining maneuverability in aisles. Choosing this C-MHD5MRSB caster ties wheel size, load rating and brake function into one part number for straightforward cart construction and maintenance planning.