DH Caster 6" Plate Mount Swivel Caster, Moldon Rubber, No Brake, 450 lb, C-MHD6MRS

DH Casters Swivel Caster For Heavy Carts

DH Casters swivel caster with 6 inch moldon rubber wheel no brake, plate mount 450lb capacity - C-MHD6MRS is built for moving loaded carts and equipment in demanding service. The caster is designed above industry standards, which supports frequent use in busy facilities where loads and run times are higher. A 450 lb load capacity allows one caster to carry substantial weight, letting you size caster sets appropriately for platform trucks, flatbed carts, containers, automotive equipment, distribution carts and warehouse equipment. The 6 inch wheel diameter helps the caster roll more easily over typical shop and warehouse floor joints, so operators can keep loads moving with less effort. A 2 inch tread width spreads the load over more floor area, which supports steady tracking when pushing or pulling longer carts through aisles or docks.

Key C-MHD6MRS Caster Details That Deliver

• The full doubleball heat treated raceways support smooth swiveling under load, which helps carts start turning without binding when repositioning heavy platforms in tight spaces.
• Double-welded legs reinforce the fork structure, which supports the caster under side loads as carts hit bumps, dock plates or floor transitions in normal warehouse use.
• The nut-and-bolt kingpin construction holds the swivel assembly together, which supports serviceability when fleets require consistent performance over long-term use.
• Zinc plating on the caster components provides a protective surface, which supports appearance and function in indoor industrial environments where moisture or cleaning is present.
• Zerk fittings for grease reach all bearings, which allows lubrication points to be serviced so swiveling and rolling remain consistent during repeated duty cycles.
• The plate mount design with 3-15/16 inch by 4-1/2 inch plate size sets a defined mounting footprint, which supports alignment with many standard plate patterns used on carts and trucks.

Plate Mount Swivel Setup For Heavy Loads

The plate mount configuration on this caster defines a solid connection point to platform trucks, flatbed carts and similar equipment, which supports stable load transfer from the cart frame to the wheel. A plate size of 3-15/16 inch by 4-1/2 inch provides a rectangular footprint that spreads forces into the mounting surface, which helps carts feel steady when loaded near the rated 450 lb per caster. The swivel type construction allows the wheel to rotate around a vertical axis, which helps operators steer and maneuver in aisles or loading zones without dragging wheels sideways. When the 6 inch diameter moldon rubber wheel turns within this swivel housing, it supports a combination of directional control and shock absorption suited to typical warehouse and shop floors.

Using This 6 Inch Moldon Rubber Caster In Workflows

Where This DH Casters Swivel Caster Fits Best

This caster is specified for use on platform trucks and flatbed carts, which places it in applications where operators routinely move concentrated loads between work areas. Its stated use on containers and automotive equipment means it can support rolling storage or service carts near assembly, repair or staging lines. The caster is also listed for distribution carts and warehouse equipment, tying it directly to order fulfillment and material handling paths where carts run many cycles every day. As a plate mounted caster in the builders hardware and plate mounted casters category, it suits equipment that is fabricated or repaired with welded or bolted plates rather than stem sockets, aligning with common industrial cart designs.

Why These Swivel And Wheel Details Matter

The 6 inch wheel diameter and 2 inch tread width define the wheel contact patch, which influences how the caster rolls under a 450 lb load rating on typical warehouse floors. This size combination balances roll resistance and stability, so carts can carry significant weight without feeling overly stiff to push. The moldon rubber wheel type supplies a molded rubber tread over a core, which helps absorb minor floor irregularities and reduce impact to the equipment being moved. Full doubleball heat treated raceways inside the swivel head distribute load and turning forces, which supports smooth rotation when changing direction with loaded distribution carts. Double-welded legs brace the fork against lateral forces, which is valuable when carts meet dock thresholds or are turned quickly in confined spaces. The nut-and-bolt kingpin and zerk fittings for grease link directly to ongoing service, because they define points where the swivel and wheel bearings can be maintained so turning effort and tracking stay predictable over time on warehouse equipment and trucks.

Common Questions About The C-MHD6MRS Caster

Selecting This Swivel Caster For Your Equipment

The DH Casters swivel caster with 6 inch moldon rubber wheel and 450 lb capacity gives a defined combination of wheel size, plate dimensions and load rating for platform trucks, flatbed carts, containers, automotive equipment, distribution carts and warehouse equipment. The plate mount footprint of 3-15/16 inch by 4-1/2 inch, swivel construction and moldon rubber wheel type set clear parameters for matching this caster to existing or new carts. For builds or refits that call for a plate mounted caster in this capacity range, C-MHD6MRS from Wurth Baer Supply offers a documented option designed above industry standards with raceways, welded legs and greaseable bearings to support ongoing material handling work.