DH Caster 6" Plate Mount Rigid Caster, Moldon Rubber, No Brake, 450 lb, C-MHD6MRR

DH Casters Rigid Caster 6 Inch For Heavy Loads

DH Casters rigid caster 6 inch is a plate mount caster with a moldon rubber wheel and 450 lb load capacity, so it supports heavier carts and equipment where controlled, straight-line rolling is needed. The rigid design keeps travel straight, which helps when guiding platform trucks or warehouse carts down long aisles. The 6 inch wheel diameter gives a good balance of obstacle clearance and low push effort on typical shop and warehouse floors. A 2 inch tread width spreads the load, which helps the wheel track steadily under automotive equipment, distribution carts, or containers. Moldon rubber wheel construction provides a firm rolling surface with rubber tread characteristics, which works well for frequent moves with consistent routes. The plate mount design sets a stable footprint on the mounting surface, which suits flatbed carts or warehouse equipment frames that see repeated rolling over time.

Key C-MHD6MRR Caster Details That Matter On The Job

• The 450 lb load capacity rating defines how much weight this caster is designed to support, which matters when sizing casters for platform trucks, flatbed carts, or loaded containers that see daily use.
• The 6 inch wheel diameter sets the rolling height and obstacle capability, which matters when moving distribution carts or warehouse equipment over small floor joints and transitions without excessive effort.
• The 2 inch tread width provides a moderate contact patch, which helps carry weight from automotive equipment or carts while keeping rolling resistance suitable for repeated moves.
• The moldon rubber wheel type gives a firm wheel structure with a rubber running surface, which matters when equipment needs consistent tracking along regular warehouse or shop routes.
• The plate mount style with a defined plate size focuses force into a broad mounting area, which helps rigidly attach the caster to trucks, carts, or equipment frames for repeated rolling cycles.

Plate Mount Rigid Caster Fit And Mounting Points

This plate mount rigid caster uses a plate size of 3-15/16 inch by 4-1/2 inch, which defines the footprint you match on the underside of platform trucks, carts, or equipment frames. The plate mount design concentrates the caster connection into a flat area, which suits welded or bolted mounting pads on flatbed carts and warehouse equipment. As a rigid caster, it is typically paired with additional rigid or swivel casters, and the fixed orientation supports predictable straight-line travel along aisles. Within the plate mounted casters group, this caster sits in the plate mount product class, which helps you align it with other plate mount components in an existing cart or truck build.

Using This Plate Mounted Caster In Workflows

Where This Rigid Caster Fits Best In Use

This DH Casters rigid plate caster is part of the builders hardware and plate mounted casters category, so it is aimed at carts and equipment that rely on fixed-direction rolling. Applications listed for this caster include platform trucks, flatbed carts, containers, automotive equipment, distribution carts, and warehouse equipment, so it fits typical material-handling layouts. The 450 lb load capacity helps when building or updating platform trucks that carry moderate to heavy loads through a warehouse. The 6 inch moldon rubber wheel supports use on concrete or similar hard surfaces common in shops and distribution centers, where a firm wheel and rubber tread combination is desirable. With a 2 inch tread width, the caster suits equipment that needs stable support without excessive wheel bulk, helping keep cart frames compact. Within automotive equipment and containers, the rigid orientation supports straight alignment when equipment is moved in and out of storage rows.

Why These Caster Details Help Repeatable Results

The plate mount product class defines a flat plate interface, which helps standardize how this caster fastens to truck or cart frames during assembly or replacement work. The 3-15/16 inch by 4-1/2 inch plate dimensions give predictable layout measurements, which helps align hole patterns when matching multiple casters on a platform truck or flatbed cart. The rigid configuration means each caster holds a single direction, which can simplify guiding warehouse equipment along consistent travel paths. The moldon rubber wheel style contributes a firm support structure with a rubber running surface, which can help maintain rolling characteristics over time on consistent routes. Being part of Wurth Baer Supply builders hardware offering, this caster aligns with typical woodworking and shop environments where carts and equipment support material flow. Across distribution carts and warehouse equipment, these combined details support repeatable setups where casters are selected by wheel diameter, load capacity, and plate size to match existing layouts.

Common Questions About This 6 Inch Rigid Caster

Select This Caster For Straight-Line Cart Movement

The DH Casters rigid caster with 6 inch moldon rubber wheel, 450 lb capacity, and plate mount gives a defined set of dimensions for platform trucks, carts, and warehouse equipment. The 3-15/16 inch by 4-1/2 inch plate, 2 inch tread width, and rigid configuration help you match this caster to applications such as platform trucks, flatbed carts, containers, automotive equipment, distribution carts, and other warehouse equipment that need predictable straight-line rolling with a moldon rubber wheel.