Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters rigid caster is a plate mount caster with a 2 inch polyolefin wheel and 300 lb load capacity, so it supports demanding fixtures while keeping movement controlled. The zinc plated finish provides a protective surface that stands up to normal shop and store environments, which matters when casters stay under equipment long term. The rigid design holds a straight track, which is useful when fixtures must roll in and out of position without swiveling around tight spaces. A tread width of 1-11/16 inch spreads the load across more floor area, helping the fixture feel stable while rolling. The non-marking wheel type protects finished floors as fixtures move through sales areas or workspaces, reducing cleanup after layout changes. DH Casters branding and the specific part number C-B20034P1PS give a clear reference for matching casters across multiple fixtures.
This plate mount caster uses a 2-3/4 x 3-3/4 inch plate, so it works where fixture bases can accept that footprint for solid mounting. The rigid configuration keeps the wheel aligned with the plate, which is helpful when fixtures need straight-line tracking along aisles or wall runs. With a 300 lb load capacity, each caster is rated for substantial static and rolling loads, which lets planners size the caster count per fixture around known equipment weights. The 2 inch wheel diameter keeps the fixture profile compact, which is useful under computer mainframes and similar equipment where vertical clearance is limited. Because the wheel type is non-marking polyolefin, the caster rolls under weight without leaving marks on typical commercial floor finishes.
This display fixture caster is specified for store display fixtures, so it suits retail environments where fixtures move for resets and cleaning while staying low to the floor. The same caster is listed for computer mainframes, which means it supports dense, concentrated loads common in IT equipment while keeping movement predictable on rigid tracks. Its use on grocery coolers and freezers ties the 300 lb load capacity and non-marking polyolefin wheel directly to refrigerated equipment that must roll without scarring cooler-area floors. The application to vending machines highlights how the rigid plate mount setup supports tall, narrow loads that benefit from straight-line movement when repositioned. Its suitability for pianos connects the tread width and non-marking design to sensitive wood or finished floors where surface appearance is important during moves.
The rigid plate mount design fixes the wheel direction under the 2-3/4 x 3-3/4 inch plate, which helps repeated moves follow the same path without fishtailing, useful along grocery aisles or tight back-room runs. The 300 lb load capacity sets a clear rating for each caster, which lets planners configure casters beneath vending machines and coolers so loaded weight stays within intended limits for smoother rolling. The 2 inch wheel diameter and 1-11/16 inch tread width combination balances low overall height with a wide contact patch, which supports pianos and display fixtures by keeping them feeling planted while they roll. The zinc plated finish protects the caster frame in typical indoor moisture and spill conditions around coolers and freezers, helping the caster operate consistently over many repositioning cycles. The non-marking polyolefin wheel type maintains floor appearance under store fixtures and computer mainframes, which helps preserve a professional look in customer and equipment areas after repeated moves.
This DH Casters rigid caster has a 300 lb load capacity, so it is suited to supporting heavy fixtures like vending machines, coolers, pianos, and similar equipment when used in appropriate quantities.
The caster uses a plate size of 2-3/4 x 3-3/4 inch, providing a broad mounting area that spreads forces into the fixture base for stable support of heavy loads.
The caster has a 2 inch wheel diameter and a 1-11/16 inch tread width, which keep fixtures low while offering a wider contact surface for steadier rolling under load.
The wheel type is polyolefin and is described as non-marking, so it rolls with a hard surface while helping protect typical commercial floors from visible tracking.
This caster lists applications such as store display fixtures, computer mainframes, grocery coolers and freezers, vending machines, and pianos, guiding its use toward these equipment types.
This product is a rigid, plate mount caster, so it bolts via a plate and tracks in a fixed direction rather than swiveling, which supports straight-line movement.
The DH Casters rigid caster with 2 inch non-marking polyolefin wheel, 300 lb load capacity, and 2-3/4 x 3-3/4 inch plate mount layout ties directly to store display fixtures, computer mainframes, grocery coolers and freezers, vending machines, and pianos. Matching those verified applications with the rigid plate mount and tread width helps align this C-B20034P1PS caster to fixtures and equipment that need straight-line movement, floor protection, and low overall height. For builders and fixture planners working within those loads and applications, this caster offers a defined spec set to build into new projects or updates.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CCB20034T2PS Mfr# C-B20034T2PS | DH Caster 2" Threaded Stem Mount Rigid Caster, Polyolefin, No Brake, 300 lb, C-B20034T2PS | ||||
Sold in: 1 Each |  CCB20034T2PS-SB Mfr# C-B20034T2PS-SB | DH Caster 2" Threaded Stem Mount Rigid Caster, Polyolefin, With Brake, 300 lb, C-B20034T2PS-SB |