Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters rigid caster with brake uses a 2 inch polyolefin wheel on a rigid frame to provide controlled movement for fixtures that need straight-line rolling and firm positioning. The zinc plated finish protects the caster body, supporting dependable use in typical store or equipment environments. A non-marking wheel design helps protect finished floors while fixtures are moved into position. The 1-11/16 inch tread width spreads the load across more surface area, helping the caster support weight while rolling smoothly. A 300 lb load capacity gives a clear limit for planning how many casters to use under a display or machine base. The integrated brake acts directly at the wheel, allowing the fixture to be held in place once aligned. Stem mounted construction fits applications designed around a threaded stem connection instead of a top plate.
This threaded stem rigid caster uses a 1/2 inch - 13 x 1-1/2 inch stem size, so it engages mounting points tapped or fitted for that thread pattern and length. That stem dimension helps the caster seat firmly in compatible threaded inserts on fixture corners or machine frames. The rigid frame construction keeps the wheel tracking straight, which is useful where fixtures roll along aisles or straight service runs. A wheel brake on the caster lets installers stop rotation at the point of use, so the supported unit can remain steady during loading, unloading, or customer use. Non-marking wheel behavior supports use on finished commercial floors where surface appearance is part of the installation requirement.
This display fixture caster is described for applications such as store display fixtures, computer mainframes, grocery coolers and freezers, vending machines, and pianos, so it addresses a range of heavy commercial and institutional equipment. In store display fixtures, the 2 inch wheel diameter and rigid stem mount help fixtures roll along straight aisles while keeping product at consistent viewing height. On computer mainframes, the threaded stem mount connects the caster directly to the frame structure, allowing controlled relocation of equipment rows. At grocery coolers and freezers, the zinc plated finish supports everyday indoor conditions while the non-marking wheel helps limit visible floor tracks near customer areas. Vending machines benefit from the 300 lb load capacity by using multiple casters to distribute weight along the base. For pianos and similar heavy items, the polyolefin wheel and rigid frame manage rolling in straight paths during repositioning tasks.
The 1/2 inch - 13 x 1-1/2 inch threaded stem dimension provides a defined interface that aligns with threaded receivers designed to that size, helping installers achieve consistent mounting depth and alignment across multiple casters. Rigid frame construction means the wheel does not swivel, so each caster tracks straight and contributes to predictable movement when units are pushed or pulled along a set direction. The 1-11/16 inch tread width supports weight distribution that contributes to stable rolling, which is important when moving tall display fixtures or loaded machines. A non-marking polyolefin wheel offers a firm rolling surface while helping minimize visible marks on flooring, supporting ongoing use in customer-facing spaces. The integrated brake allows the wheel to be locked at the caster, helping fixtures remain steady once positioned for use or service. With a 300 lb load capacity clearly defined, planners can assign an appropriate number of casters per fixture or machine to stay within intended loading for typical movement and positioning tasks.
This caster uses a polyolefin wheel, which provides a hard, non-marking rolling surface helpful for commercial floors during routine movement of fixtures and equipment.
The wheel diameter is 2 inches with a 1-11/16 inch tread width, keeping fixtures relatively low while distributing load for steady rolling.
This caster uses a 1/2 inch - 13 x 1-1/2 inch threaded stem, so it fastens into components designed with that thread size and depth for direct mounting.
This rigid caster is rated for a 300 lb load capacity, which helps planners determine caster quantity and positioning under heavier fixtures or machines.
Applications listed for this caster include store display fixtures, computer mainframes, grocery coolers and freezers, vending machines, and pianos.
The caster has a zinc plated finish, which provides a protective coating suited to typical indoor commercial environments.
The DH Casters rigid caster with brake combines a 2 inch non-marking polyolefin wheel, zinc plated body, and 1/2 inch - 13 x 1-1/2 inch threaded stem to address display fixtures and equipment needing straight tracking. With a 300 lb load capacity and rigid design, it suits bases that roll in defined paths through aisles or service corridors. Applications identified for this caster, such as store display fixtures, computer mainframes, grocery coolers and freezers, vending machines, and pianos, show its role in supporting substantial loads across commercial environments.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CCB20034P1PS Mfr# C-B20034P1PS | DH Caster 2" Plate Mount Rigid Caster, Polyolefin, No Brake, 300 lb, C-B20034P1PS | ||||
Sold in: 1 Each |  CCB20034T2PS Mfr# C-B20034T2PS | DH Caster 2" Threaded Stem Mount Rigid Caster, Polyolefin, No Brake, 300 lb, C-B20034T2PS |