Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand slide of Grass's Dynapro concealed undermount system in the 18 inch length, configured specifically for drawer boxes with 5/8 to 3/4 inch sides. It delivers full extension, integrated soft-close, and a 100 lb per pair capacity, sold as a bulk single for production shops stocking lefts and rights by the case.
The thicker side-thickness range is what sets this version apart from the standard Dynapro model. Shops building drawer boxes from 3/4 inch hardwood — dovetailed walnut, oak, or hard maple — or from Baltic birch plywood cut to 3/4 inch need this version, not the standard 1/2 to 5/8 inch model. The two versions are not interchangeable: the slide spacing, locking-device geometry, and box-width formula are calibrated to the side thickness, so pairing the wrong version with your box stock creates a misfit at the locking device. At full extension, the whole box clears the cabinet face, which matters in deep base cabinets and pantry pull-outs where rear access is the point of the drawer.
Dynapro slides are built on formed steel with a zinc finish, running on a roller-bearing carriage. The zinc finish is a functional indoor coating, and because the slide mounts entirely beneath the drawer box, it stays out of sight whether the drawer is open or closed. The integrated soft-close mechanism is a liquid damper, not a ramp — it slows the drawer through the last portion of travel rather than simply pulling it home, which is the distinction that matters in a kitchen where cabinet doors and drawer fronts are closing all day.
Production cabinet shops building thicker-sided box programs reach for this SKU to stock bulk singles and match them with the right-hand mate at the time of assembly. Custom shops running 3/4 inch hardwood drawer programs find it eliminates the guesswork of specifying the wrong thickness version. The 100 lb per pair rating handles most residential kitchen loads, and Dynapro's face-frame and frameless compatibility means it runs in traditional American face-frame carcasses and European-style frameless boxes without requiring a different slide family for each construction type.
No. This is the left-hand slide only. You need one left-hand and one right-hand 18 inch Dynapro slide in the same side-thickness version to make a working pair for one drawer. Ordering two of this SKU gives you two left-hand slides, which will not make a functional set.
The box must be built to Grass's published Dynapro specification for the 5/8 to 3/4 inch side-thickness version: nominal 18 inch length, the correct box-width formula for the side thickness, bottom recess, rear notch, and drilling for the Dynapro front locking devices. An off-spec or unmodified box will not seat correctly on the slides.
Dynapro front locking devices are series-specific accessories. Confirm whether locking devices ship with this bulk single or need to be ordered separately before placing a production run.
Yes. In a face-frame cabinet, the rear of the slide needs support from Dynapro-specific rear mounting brackets. These brackets are not included and do not interchange with rear brackets from other brands or slide series. Add them to the order any time you are running this slide in face-frame construction.
This SKU is the soft-close version. Dynapro also offers a Tipmatic Soft-close model that combines push-to-open with damped closing in a single unit — that is the correct choice for handle-less fronts, not adding a separate push-to-open mechanism to this soft-close slide.
Match this left-hand slide to the right-hand mate, confirm your box spec against the Dynapro 5/8 to 3/4 inch side-thickness template, and add the bracket and locking-device quantities your cabinet construction requires — then every drawer in the run goes together without a second trip to the supply house.
Sold In: 336 Each