Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand member of Grass's Dynapro undermount slide in the 15 inch length, engineered specifically for drawer boxes with 5/8 inch to 3/4 inch sides. It delivers full extension, integrated soft-close, and a 100 lb per pair rating — sold as a bulk single for production shops stocking lefts and rights separately.
Most undermount slides in this length are built around 5/8 inch (16mm) drawer sides. This Dynapro variant extends that range to 3/4 inch (19mm) material, which matters when the shop is building from thicker hardwood stock, solid-bottom plywood boxes, or any box spec that calls for heavier sides. The slide spacing, locking device geometry, and box-width formula are all engineered around that thickness range — so selecting the right version from the start prevents fit problems at the bench. Build the drawer box to Grass's published Dynapro specification for this variant: correct nominal length, box-width formula, bottom recess, rear notch, and drilling for the Dynapro front locking devices.
For face-frame cabinets, add the Dynapro-specific rear mounting brackets at the back of the slide — these are sold separately and are not interchangeable with rear brackets from other brands or other Grass series. In frameless construction, the slide mounts directly to the cabinet side panel.
The Dynapro runner is steel throughout with a zinc finish that handles years of indoor service without surface degradation. The roller-bearing carriage keeps the drawer tracking smoothly and quietly under load — the same carriage Grass uses across the Dynapro family, including as the runner under the Vionaro drawer system. Because the slide rides beneath the drawer box, the finish is entirely concealed in use: nothing but the box and front show when the drawer is open.
This SKU is the right call for cabinet shops building with 3/4 inch drawer-side material that want concealed slides with soft-close in smaller drawer openings. A 15 inch slide length suits bathroom vanity drawers, narrow base cabinet drawers, and compact kitchen drawers where a longer runner would crowd the cabinet interior. The bulk-single format means high-volume shops can stock lefts and rights in the quantities the job requires, rather than buying pre-paired sets. Designers and contractors specifying handle-pull kitchens or bath vanities with thicker box construction will find this the direct answer for that combination of length and side thickness.
This is the left-hand member only. You need to order the matching right-hand 15 inch Dynapro slide separately to complete one working drawer installation. Running two left-hand slides will not work.
Yes. This variant covers both 5/8 inch and 3/4 inch drawer sides. If your box uses the thinner 5/8 inch material only and you want the broadest selection, note that other Dynapro 15 inch variants are sized for 1/2 to 5/8 inch sides — verify the maximum drawer thickness attribute matches your box before ordering.
Dynapro front locking devices are series-specific accessories. Confirm whether locking devices are included with this bulk SKU or need to be ordered separately before finalizing your cart.
Yes — this slide suits both face-frame and frameless construction. In a face-frame cabinet, add the Dynapro rear mounting brackets at the back of the slide. Those brackets are sold separately and are specific to the Dynapro series.
No. Dynapro locking devices, rear brackets, and drilling templates are engineered for the Dynapro system and are not compatible with other Grass lines or other brands.
When the drawer box calls for 3/4 inch sides and the opening is in the 15 inch range, this Dynapro left-hand slide pairs the correct thickness specification with full extension and soft-close — so the finished drawer performs exactly the way the spec intends.
Sold In: 336 Each