Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand member of Grass's 15 inch Dynapro concealed undermount system, engineered specifically for drawer sides from 5/8 inch to 3/4 inch thick. It delivers full extension, integrated soft-close, and a 100 lb per pair rating in a bulk-pack single suited to production shops stocking by the case.
The 5/8-to-3/4 inch side-thickness version fills a specific gap in production work. Shops building drawer boxes from 3/4 inch hardwood or thick plywood cannot use the standard 5/8 inch version — the slide spacing, locking device geometry, and box-width formula are all built around the 3/4 inch material range. If the box side is too thick for the standard model, this is the slide to spec. At 15 inches, it suits shallower base cabinets, upper cabinet drawers, and smaller pull-out boxes where a longer slide would exceed the available interior depth. Face-frame and frameless cabinets are both in play; in face-frame construction, plan for the Dynapro-specific rear mounting brackets, sold separately.
The Dynapro slide body is formed steel with a zinc finish — a functional, corrosion-resistant coating built for indoor service. A roller-bearing carriage keeps the travel smooth and quiet under load. The slide is concealed entirely beneath the drawer box when the drawer is open, so the finish serves a structural role rather than a decorative one. The Dynapro system is engineered for drawers up to 48 inches wide without an add-on synchronization bar; both slides in a pair track together as the drawer moves.
Cabinet shops building from 3/4 inch solid-wood or plywood drawer sides are the primary buyer here. The bulk single format suits operations that stock left-hand and right-hand slides by the case and pull from inventory as jobs run. A 15 inch length also works for designers and installers specifying drawers in shallower-than-standard base cabinets or in uppers — anywhere the interior depth cannot accept a longer slide. Homeowners and renovators tackling a single replacement will find the same accurate fit, provided the drawer box is built or rebuilt to Grass's specification for this series.
Yes. Undermount slides require the box to be built to the manufacturer's specification: correct nominal length, box-width formula based on the 5/8-to-3/4 inch side thickness, bottom recess, rear notch, and drilling for the Dynapro front locking devices. An off-spec or standard box will not seat correctly.
No. The 5/8-to-3/4 inch version and the standard 5/8 inch version are distinct models with different slide spacing and locking device geometry. Match the slide version to your drawer side thickness.
Dynapro front locking devices are series-specific accessories. Confirm whether locking devices are included with this bulk SKU or need to be ordered separately before placing your production order.
Face-frame installs require Dynapro-specific rear mounting brackets to support the back of the slide behind the face frame. These brackets are sold separately and are not interchangeable with rear brackets from other brands or series.
This is a bulk single — one right-hand slide. Pair it with the matching left-hand 15 inch Dynapro slide in the same thickness version to make one complete working set per drawer.
Stock the right-hand 15 inch Dynapro in the 5/8-to-3/4 inch version alongside its left-hand mate, add the Dynapro locking devices and any brackets your cabinet construction requires, and every thicker-sided drawer in the run goes together without a second order.
Sold In: 336 Each