Rev-A-Shelf 4WDIV Series 24-3/4"Wx19-13/16"Dx6"H Maple Drawer Divider, -4WDIV-30-1

Choose a Rev-A-Shelf drawer divider

Rev-A-Shelf drawer divider gives an existing drawer a more organized layout with a trim-to-fit design and maple construction. This drawer insert from Rev-A-Shelf Corporation is part of the 4WDIV Series and is sized at 24-3/4 inches wide, 19-13/16 inches deep, and 6 inches high. The deep drawer divider system installs with 4 screws, which helps buyers update a drawer without replacing the box. A semigloss finish gives the maple drawer insert a finished look that fits many kitchen storage projects. Each verified 4WDIV unit comes with 2 notched dividers and 3 cross dividers, and the insert kits include 3 standard dividers. For buyers planning a drawer divider for existing drawer applications, this product is built for retrofit use and should be trimmed and checked carefully before installation.

Use this drawer insert for order

• 24-3/4 inch width, 19-13/16 inch depth, and 6 inch height - These verified dimensions help buyers compare the insert to drawer interior space before cutting or fastening.
• Trim-to-fit drawer divider design - This feature helps installers adapt the drawer insert to an existing drawer instead of building a custom organizer from scratch.
• Installs with 4 screws - The simple fastening method supports a direct install process for cabinet shops, remodelers, and serious DIY buyers.
• Maple construction - The maple drawer divider gives a wood interior a coordinated look and a solid material choice for kitchen and bath cabinetry.
• Semigloss finish - The finished surface helps the Rev-A-Shelf drawer insert present a clean appearance right out of the box.
• Each 4WDIV includes 2 notched dividers and 3 cross dividers - These verified divider pieces help create separate sections inside a deep drawer.
• Insert kits include 3 standard dividers - The included standard dividers give buyers additional internal partition options that should be matched to the drawer layout.
• TSCA Title VI compliant - This verified compliance detail may matter to buyers who need to confirm material documentation for a project.

Confirm drawer insert fit and contents

Key specs to confirm: This drawer insert is listed at 24-3/4 inches wide, 19-13/16 inches deep, and 6 inches high. Because it is a trim-to-fit product for an existing drawer, buyers should measure the inside drawer width, inside depth, side height, and any hardware or box obstructions before ordering. Confirm that the planned cut still supports the divider layout you want. The product data verifies maple construction, semigloss finish, and installation with 4 screws. If you need load capacity, exact trim limits, or any additional compliance detail beyond TSCA Title VI, those points should be confirmed with the manufacturer or technical documentation.

What's included: Verified contents include 2 notched dividers and 3 cross dividers for each 4WDIV. Product data also states that insert kits include 3 standard dividers.

What to verify before ordering: Check your actual drawer interior measurements, confirm that a 6 inch high divider system suits the drawer, review where the 4 screws will mount, and make sure the trim-to-fit design matches the drawer box material and your intended compartment layout.

See how this drawer divider system works

Use a deep drawer divider system daily

A deep drawer divider system is often chosen when a standard drawer becomes hard to manage because items slide together or stack in ways that slow down daily work. In a kitchen, that can mean utensils, wraps, prep tools, or larger accessories shifting every time the drawer opens. In a bath or utility cabinet, it can mean mixed storage that wastes space and makes supplies harder to reach. This Rev-A-Shelf drawer divider is built for buyers who want to improve order inside an existing drawer rather than rebuild the cabinet.

The trim-to-fit format matters in retrofit work. A drawer divider for existing drawer applications needs to match the real interior dimensions of the drawer box, not only the cabinet opening. That is why the listed size of 24-3/4 inches wide by 19-13/16 inches deep by 6 inches high should be treated as the starting point for measurement. If your drawer has side hardware, unusual joinery, or a reduced interior depth, confirm clearances before trimming and fastening.

The included divider pieces support practical compartment planning. Product data verifies 2 notched dividers and 3 cross dividers with each 4WDIV, and insert kits include 3 standard dividers. That combination gives the buyer a way to break a deep drawer into smaller sections for better separation. For a kitchen drawer organizer insert, this can help keep tools from shifting into one large pile. For a workshop or bath drawer, it can help separate supplies by size or use. Because the product installs with 4 screws, the installation path is straightforward, but buyers should still confirm screw placement and drawer material before drilling.

The maple drawer divider also fits projects where wood appearance matters. Maple construction with a semigloss finish gives the insert a finished cabinet-accessory look that can suit many wood drawer interiors. If your project requires a specific species match or finish match, verify visual compatibility before purchase because only the listed maple construction and semigloss finish are confirmed here.

Compare drawer insert details with confidence

When buyers compare one drawer insert to another, the most useful differences are usually fit method, material, included divider pieces, and installation style. This Rev-A-Shelf drawer insert is clearly identified as a trim-to-fit insert for existing drawers, which is useful for projects where the drawer box is already built and the goal is to add structure inside it. A fixed-size organizer may not allow the same adjustment, so measuring and confirming trim needs is a key part of selection.

Material is another practical comparison point. This product uses maple construction with a semigloss finish, so buyers looking for a wood organizer can compare that directly to other material types without guessing. The verified content list also helps. Instead of buying a divider system with unclear internal parts, the buyer has confirmed information showing 2 notched dividers, 3 cross dividers, and 3 standard dividers in insert kits. That gives a clearer picture of how the layout may be built inside the drawer.

Installation details also shape the choice. Product data states that this drawer divider system installs with 4 screws. For many installers, that is easier to plan than products with unspecified mounting methods. Rev-A-Shelf Corporation is the listed brand and manufacturer reference for this product, which helps buyers match the item to known sourcing and replacement records. If your project depends on exact cut allowances, accessory spacing, or drawer hardware clearance, those are the details to confirm before ordering because they are not fully specified in the verified product data.

Check drawer divider fit before ordering

Order the right maple drawer divider

Maple drawer divider projects go more smoothly when the fit is checked first. This Rev-A-Shelf drawer divider gives buyers a trim-to-fit drawer insert with maple construction, semigloss finish, installation with 4 screws, and verified included divider components. Before purchase, confirm the inside drawer measurements, the 6 inch divider height, and the space needed for trimming and fastening. If your layout depends on exact cut allowances or special drawer hardware clearance, review those details with the manufacturer documentation before ordering.