Formica 6127-58 Muslin Fabric Laminate defines a muslin-inspired, fabric look surface for interior commercial design where warmth and effortless elegance are desired. This sheet is a laminate from the 2023 Formica Laminate Fabric Collection, so the visual ties directly into a coordinated palette built around linen-style textures for cohesive projects. As a Grade 12 postforming laminate, it is built for forming applications, which lets you carry the muslin fabric appearance across edges and profiles instead of stopping at a square edge. The 60 x 144 inch size supports larger runs and continuous stretches of surface, reducing seam planning on longer counters or wall runs. The material is identified as laminate within the Formica HPL line, so it fits standard high-pressure laminate fabrication workflows in commercial shops.
This Grade 12 postforming laminate is postformable to permit bending on suitable commercial postforming equipment, aligning with typical HPL shop processes that rely on heat and forming bars. The optimum postforming temperature of 325F (163C) defines the heat level targeted during forming, helping installers dial in equipment settings for consistent results. Outside radius capability down to 1/2 inch (12.7mm) and cove radius down to 3/16 inch (4.8mm) define the tightest curves the sheet is intended to handle, which supports planning of edge and cove profiles before cutting cores. The 58 matte finish is recommended for horizontal and vertical interior applications, so the same surface can run across tops, fronts, and panels while maintaining a uniform appearance.
This product is part of the Formica Laminate Fabric Collection, positioned as a preferred palette for commercial design that seeks warmth and effortless elegance, so it suits interior areas where a textile-inspired look is important. As a laminate in the Formica HPL category, it falls into standard high-pressure laminate usage on decorative surfaces in interior applications, tying into typical cabinet, casework, and surface fabrication. The muslin fabric visual connects with the collection's linen-inspired visuals, supporting designers who want coordinated patterns across multiple surfaces. Recommended use on both horizontal and vertical interior applications allows the same 6127-58 Muslin Fabric design to extend from work surfaces up onto vertical faces for a continuous look.
The Grade 12 postforming construction at 0.035 inch (0.9mm) thickness is designed for forming whenever decorative or functional shaping is desired, so fabricators can wrap edges and profiles without switching materials. Being postformable to permit bending on suitable commercial postforming equipment streamlines setups for shops already running postform lines, because the laminate is intended for those cycles. The optimum postforming temperature of 325F (163C) establishes a target during heating that supports repeatable bends and controlled forming windows. Outside radius capability down to 1/2 inch and cove radius down to 3/16 inch provide clear limits for tight curves, which helps avoid designs that exceed the laminate's forming intent. The 58 matte finish enhances the beauty of color and produces greater clarity and depth, which supports the fabric-inspired pattern by keeping the muslin look visually legible across different lighting conditions. The note that when used with a gloss finish, Grade 12 is recommended for light-duty horizontal applications clarifies that this Grade 12 build is aligned with lighter-duty horizontal use in gloss configurations, which informs where that combination is best applied.
Formica 6127-58 Muslin Fabric Laminate is supplied as a 60 x 144 inch sheet, which supports longer interior runs and larger panels without interrupting the muslin pattern.
This laminate is Grade 12 postforming at 0.035 inch (0.9mm) thickness, providing a balance of flexibility and strength for forming decorative and functional shapes.
The laminate is designed for an outside radius down to 1/2 inch (12.7mm) and a cove radius down to 3/16 inch (4.8mm), guiding edge and cove profile design.
This Grade 12 laminate lists an optimum postforming temperature of 325F (163C), providing a concrete target for heat settings on commercial postforming equipment.
The 58 matte finish is recommended for horizontal and vertical interior applications, so it can run across tops and wall or cabinet faces with a consistent look.
The muslin fabric design is part of the Formica Laminate Fabric Collection, described as a preferred palette for commercial design seeking warmth and effortless elegance.
Choose Formica 6127-58 Muslin Fabric Laminate Postform Grade, 60 x 144 inch Matte Finish when a muslin-inspired, fabric look is needed within a Formica Laminate Fabric Collection palette. The Grade 12 .035 inch (0.9mm) postforming build, outside radius capability to 1/2 inch, and cove radius to 3/16 inch work together for decorative or functional forming on suitable commercial postforming equipment. The 58 matte finish recommended for horizontal and vertical interior applications supports a unified surface appearance from tops to vertical faces.
Sold In: 1 Sheet