Formica 6127-58 Muslin Fabric laminate gives you a linen-inspired decorative surface in a 30 inch by 120 inch sheet for interior projects that need a fabric look with hard-wearing laminate performance. This Grade 12 postforming laminate has a .035 inch (0.9mm) thickness, so it supports forming while still providing a solid surfacing layer for commercial and residential interiors. The sheet is part of the Formica Laminate Fabric Collection, which offers visuals inspired by linen, so you can bring warmth and a textile look to millwork, counters, or vertical panels while working with standard laminate fabrication methods. The 58 matte finish imparts a warm, pleasing effect that enhances the beauty of the color, helping the muslin tone read clearly on finished work. That matte surface produces greater clarity and depth, which matters when you want the fabric visual to stay consistent across doors, drawer fronts, or wall panels.
This Formica Muslin Fabric Grade 12 postforming laminate is postformable to an outside radius down to 1/2 inch (12.7mm), which supports wrapped front edges on counters and similar components where a small radius is desired. It also supports a cove radius down to 3/16 inch (4.8mm), allowing inside corner transitions in postformed tops or splash details that follow Formica postforming parameters. The optimum postforming temperature of 325 F (163 C) supports predictable heating on commercial postforming equipment, so bends occur in the intended zone without overprocessing the sheet. Because it is recommended for horizontal and vertical interior applications, this 58 matte muslin design can run from tabletops to wall panels using one decorative specification. The fabric-inspired visual from the Formica Laminate Fabric Collection provides warmth and effortless elegance in commercial design while using standard laminate fabrication steps.
This Formica Corporation 6127-58 Muslin Fabric laminate is part of a laminate and surfacing materials offering that serves the woodworking industry, so it fits naturally into cabinet shops and millwork operations that already process high-pressure laminate. The Grade 12 postforming build and .035 inch (0.9mm) thickness support use on interior projects where shaped fronts, wrapped edges, or coved backsplashes are part of the specification. With outside radius capability to 1/2 inch (12.7mm), the sheet works for many standard postformed front profiles on work surfaces or reception tops that need a soft edge rather than a square corner. The ability to achieve a cove radius to 3/16 inch (4.8mm) supports inside transitions at the deck-to-splash area in tops using appropriate postforming equipment. Because the 58 matte finish is recommended for horizontal and vertical interior applications, the same muslin fabric visual can carry across desks, cabinet ends, and wall bands for coordinated installations in commercial interiors.
The Grade 12 designation signals that this Formica Muslin Fabric laminate is intended for postforming whenever forming is desired for decorative or functional purposes in interior applications, which helps fabricators select it confidently for bending operations instead of flat-only grades. The specified optimum postforming temperature of 325 F (163 C) gives a concrete target when configuring suitable commercial postforming equipment, which supports consistent heating cycles from job to job. The stated outside radius limit of 1/2 inch (12.7mm) and cove radius limit of 3/16 inch (4.8mm) define the curvature range, allowing designers and engineers to base front edge shapes and cove transitions on known laminate capability rather than assumptions. The 58 matte finish imparts a warm, pleasing effect, which enhances the beauty of the muslin color and produces greater clarity and depth, supporting uniform appearance across multiple fabricated components. Since the finish is recommended for horizontal and vertical interior applications and is available on all solid colors, patterns, and woodgrains in the line, the muslin fabric visual can sit beside other Formica laminate selections while using similar fabrication practices and finish behavior on finished assemblies.
This Formica 6127-58 Muslin Fabric laminate is supplied as a 30 inch by 120 inch sheet, which suits many counter runs, tall cabinet ends, and wall panels in interior work.
The Muslin Fabric laminate is Grade 12 postforming with a .035 inch (0.9mm) thickness, giving flexibility for forming along with a substantial decorative laminate layer.
The Formica 6127-58 Muslin Fabric Grade 12 laminate is postformable, with outside radius capability to 1/2 inch and cove radius to 3/16 inch when processed on suitable commercial postforming equipment.
This Grade 12 Formica Muslin Fabric laminate has an optimum postforming temperature of 325 F (163 C), which supports consistent bending results on commercial postforming machinery.
The 58 matte finish on this Muslin Fabric laminate is recommended for horizontal and vertical interior applications, so one finish can carry across tops, fronts, and wall areas.
The Formica Laminate Fabric Collection provides linen-inspired visuals, so the Muslin Fabric design brings warmth and effortless elegance while still functioning as a durable, easily cleaned laminate surface.
This Formica 6127-58 Muslin Fabric laminate combines a linen-inspired decorative surface with Grade 12 postforming performance, so it serves both aesthetic and shaping needs on interior projects. The 30 inch by 120 inch sheet size, .035 inch (0.9mm) thickness, and defined 1/2 inch outside and 3/16 inch cove radius capabilities give clear parameters for tops, panels, and wrapped edges. With an optimum postforming temperature of 325 F (163 C) and a 58 matte finish recommended for horizontal and vertical interior applications, it slots directly into established laminate workflows. For woodworking and commercial design shops sourcing laminate and surfacing materials through Wurth Baer Supply, this Muslin Fabric sheet offers a fabric-look option within familiar Formica Corporation processing guidelines.
Sold In: 1 Sheet