Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
GSlide GS2070AB front clips are Knape and Vogt 2070 3D front locking devices designed to control the front of a drawer using the 2070 series system, so installers can dial in alignment instead of living with uneven fronts. The Knape and Vogt 2070 3D front locking device is built to provide adjustment at the front connection point, which lets you correct visible issues where they actually show on the cabinet. This 2070-3D-RL configuration covers both left and right positions on the drawer, tying the front solidly to the slide hardware for stable performance. Because these components are part of the GS2070AB family, they are intended to work within that drawer slide setup, so the adjustment you make at the clips carries directly through the slide action. As a dedicated drawer slide accessory, the front locking device becomes the point where you trim the final fit of the drawer face to meet project expectations on straight lines and consistent reveals.
The Knape and Vogt 2070 3D front locking device functions at the front of the GS2070AB drawer slide system, so installation focuses on fastening the clips in the designed left and right positions and then using the built-in adjustments. Because the GSlide GS2070AB front clips act directly on the drawer front connection, each adjustment of height, in-out, or side-to-side shows immediately in the cabinet opening, which speeds up the alignment process. The 2070-3D-RL part designation defines the matched left and right layout, helping you maintain intended orientation as you set up each drawer. Once positioned, the front locking devices serve as the repeatable reference for future tweaks, allowing you to refine front alignment as projects settle or as expectations demand tighter visual control.
The GSlide GS2070AB front clips operate as part of the Knape and Vogt drawer slides accessories group, so they slot into projects that rely on the 2070-based slide configuration for operation. In cabinet runs with multiple drawers, the 2070 3D front locking device becomes the adjustment hub where the cabinetmaker sets the visible drawer front grid, tying each drawer to a consistent vertical and horizontal pattern. Because this component is identified as a front locking device, its working location is at the front of the drawer slide interface, meaning all tuning efforts focus on the most visible area of the assembly. The 2070-3D-RL designation reflects coverage of both left and right positions, which allows each drawer front to be supported on both sides during alignment, keeping the adjustment balanced across the width.
The fine tune height function built into the Knape and Vogt 2070 3D front locking device lets installers correct small vertical errors without re-drilling or rebuilding components, which cuts down on extra trips to the bench. With in-out adjustment handled at the drawer front, the same 2070 3D system allows you to nudge the front deeper or farther out relative to the cabinet, trimming the reveal so faces sit where they are expected. Side-to-side adjustment in this 3D front locking design gives another axis of control, so you can slide the front slightly left or right and bring gaps into uniform range. When combined under the 2070-3D-RL part number, these three adjustments create a controlled way to bring fronts into line across a installation, reducing the need for replacement parts and supporting repeatable, tidy results on every bank of drawers.
The Knape and Vogt 2070 3D front locking device is used to adjust the drawer front at the 2070 series connection, so installers can fine tune visible alignment in a cabinet opening.
GSlide GS2070AB front clips provide fine tune height adjustment at the front, letting you bring drawer faces into the same horizontal line across a run of drawers.
The 2070 3D front locking device supports in-out adjustment, which lets you set how far the drawer front sits relative to the cabinet face for consistent projection.
The 2070-3D-RL front locking device allows side-to-side drawer front adjustment, so you can correct small lateral shifts and maintain even gaps between drawer fronts.
Knape and Vogt 2070 3D devices act at the front locking point of the GS2070AB slide system, directly influencing the visible drawer front alignment.
The 2070-3D-RL part number indicates a front locking device set covering left and right positions, giving balanced support for drawer front adjustment.
The Knape and Vogt 2070-3D-RL front locking device gives height, in-out, and side-to-side control at the drawer front connection point, so installers can align faces to the standards expected in professional cabinetry. By basing adjustments at the GSlide GS2070AB front clips, every tweak registers where it matters visually, helping projects reach clean lines without rebuilding components. For jobs built around the 2070 system, this drawer slides accessory provides a focused way to refine fronts and keep installations consistent from the first drawer to the last.
Sold In: 1 Set