Century Cascade 17-7/8" Birch Bottom Mount Waste Pullout with 2-34 Quart White Bins Soft-Close, CASBM175-34PF
Description
Century Cascade Birch Waste Pullout For Cabinets
Century Cascade 17-7/8 birch waste pullout is a bottom mount trash pullout that organizes two 34 quart white bins in a single cabinet bay, creating a dedicated, concealed waste station that keeps the work area clear while you are at the bench or sink. The unit is made from Baltic Birch plywood with strong dovetail construction, so the pullout forms a rigid box that resists racking when extended under load and during repeated daily cycles. It is beautifully prefinished with a natural finish, which means the wood surfaces are sealed and ready to install directly into a finished cabinet interior without additional finishing steps. The unit top is routed out to perfectly match the profile of 34 and 50 quart bins, holding their rims positively so the bins stay located during opening and closing and do not shift against the cabinet sides.
Key Waste Pullout Details That Help The Job
- Made from Baltic Birch plywood with strong dovetail construction, the pullout provides a stable platform for the two 34 quart white bins, supporting full extension movement while keeping the assembly square inside the cabinet.
- Beautifully prefinished with natural finish, the cabinet-grade surfaces arrive ready to place in a finished cabinet, which reduces onsite finishing work and keeps the interior appearance consistent with higher-end woodworking.
- The unit top is routed out to match the profile of 34 and 50 quart bins, so each bin nests into a dedicated opening and stays captured during use, helping reduce noise and contact with the cabinet walls.
- Blum 170lb rated MOVENTO soft-close under mount slides support the pullout with a high load rating and soft-close action, which allows the waste to be moved smoothly while the hardware is concealed under the slide tracks.
- Floor mount brackets on the MOVENTO slides provide a defined mounting interface to the cabinet floor, which simplifies locating the pullout front-to-back and maintains alignment under repeat opening loads.
- Four adjustable door mounted brackets offer horizontal adjustment and door tilt control, so the attached door face can be aligned to surrounding fronts for a consistent reveal in the finished cabinet run.
Bottom Mount Waste Pullout Installation Details
This Century Cascade bottom mount trash pullout uses Blum 170lb rated MOVENTO soft-close under mount slides, so the mounting happens at the cabinet floor and under the pullout, leaving the sides clear and allowing the mechanism to stay hidden when the unit is open. Floor mount brackets tie the slides directly to the cabinet bottom, giving a fixed reference surface that helps keep the pullout square relative to the cabinet front during layout and final fastening. Four adjustable door mounted brackets connect the cabinet door to the pullout and provide horizontal adjustment along with door tilt control, so the installer can fine-tune both the side gaps and top-to-bottom angle of the door to match adjacent fronts in the same run.
Using This Waste Pullout In Cabinet Projects
Where This Bottom Mount Trash Pullout Fits Best
This Century Components waste pullout CASBM175-34PF is a bottom mount trash pullout designed for cabinet installations where two 34 quart white bins are required in a single opening, allowing both trash and recycling or separate waste streams behind one door. The 17-7/8 inch dimension in the product name identifies the size range where this unit is intended to fit, so it targets cabinet bays that match that depth requirement when planning layouts. Because the unit top is routed out to perfectly match the profile of 34 and 50 quart bins, it suits cabinet designs that may need to mix bin sizes over time while still using the same pullout platform. The construction from Baltic Birch plywood with strong dovetail joints makes the unit appropriate for kitchen and bath cabinet environments where the pullout will see frequent use and lateral loads as the bins are filled and emptied.
Why These Construction And Slide Details Matter
The Blum 170lb rated MOVENTO soft-close under mount slides on this soft-close undermount trash pull out provide a high load rating relative to typical household waste volumes, which supports the weight of two 34 quart bins when filled while maintaining smooth travel. Under mount slides also keep the hardware out of the way of the bins, so the full bin width is available within the routed openings in the unit top. Floor mount brackets give the installer a defined connection point to the cabinet floor, which helps maintain consistent reveal at the cabinet front because the whole assembly references a single plane. Four adjustable door mounted brackets with horizontal adjustment and door tilt control provide the fine-tuning capability needed to align the pullout door front with both inset and full overlay applications, allowing the same hardware to be used across different face-frame or frameless cabinet styles while still dialing in reveals and angles for a clean finished look.
Common Questions About Century Cascade Waste Pullout
What type of construction does this waste pullout use?
The Century Cascade 17-7/8 birch waste pullout is made from Baltic Birch plywood with strong dovetail construction, providing a rigid, long-lasting platform for the bins in everyday cabinet use.
How are the trash bins supported and held in place?
The waste pullout has a unit top routed out to match 34 and 50 quart bin profiles, so each bin nests into a shaped opening that keeps the rim captured during opening and closing.
What slide system is used for the pullout action?
The waste pullout uses Blum 170lb rated MOVENTO soft-close under mount slides, giving concealed guidance, high load capacity, and a controlled close that suits heavily loaded trash bins.
How does the door attach and adjust on this unit?
Four adjustable door mounted brackets connect the cabinet door to the pullout and provide horizontal adjustment plus door tilt control, allowing precise alignment with nearby doors and drawer fronts.
Is this waste pullout suitable for inset or overlay cabinet doors?
The Century Cascade bottom mount trash pullout works for inset and full overlay applications, which lets it integrate into different cabinet door styles while maintaining front alignment.
What role does the natural prefinished surface play in use?
The beautifully prefinished natural finish on the Baltic Birch surfaces creates a sealed, ready-to-install interior component that visually matches quality cabinetry and avoids on-site finishing steps.
Selecting This Waste Pullout For Your Cabinet Run
This Baltic Birch kitchen trash pull out from Century Components is built as a bottom mount trash pullout with two 34 quart white bins, tying together a routed-top bin platform and Blum 170lb rated MOVENTO soft-close under mount slides for smooth, supported travel. The combination of strong dovetail construction, a prefinished natural surface, and four adjustable door mounted brackets gives cabinet shops and serious DIY installers a waste solution that aligns with inset and full overlay applications while allowing precise door positioning. Choosing this unit when planning cabinet interiors builds a dedicated, concealed waste center into the run using hardware and materials designed around frequent everyday trash and recycling use.
