Century Cascade 17-7/8 birch bottom mount waste pullout gives a cabinet a dedicated dual-bin waste station built from Baltic Birch plywood, so the installer gets a solid wood pullout instead of a wire frame. The strong dovetail construction ties the sides together into a rigid box, which helps the pullout track smoothly on its slides under everyday use. A natural prefinished surface on the wood means the interior presents as clean, sealed birch without jobsite finishing steps. The unit top is routed out to perfectly match the profile of 34 and 50 qt. bins, so the bins sit in a shaped opening rather than a flat shelf, helping keep them from shifting when the pullout is cycled. This model uses two grey 34 quart bins for separated waste or recycling inside a single cabinet opening.
This Century Components bottom mount trash pullout uses Blum 170lb rated MOVENTO soft-close under mount slides, so the load is carried underneath the birch box instead of on side-mount hardware. Under mount slides leave the sides visually clean and tie the motion directly to the cabinet floor, which can help keep alignment stable over time. Floor mount brackets set the attachment point at the cabinet bottom, giving installers a clear reference for screw placement and setback. Four adjustable door mounted brackets on the front of the unit provide horizontal adjustment, so the door face can be shifted for even reveals relative to adjacent fronts. The same brackets also provide door tilt control, letting the installer fine-tune top-to-bottom alignment against neighboring doors or drawer fronts.
This Century Components bottom mount trash pullout is part of the Century Cascade line, tying into kitchen and bath cabinet layouts where a dedicated waste bay is needed. The 17-7/8 inch reference in the product name helps identify it for cabinets designed around that opening size, so it can be planned alongside other base units. Two grey 34 quart bins sit in the routed birch top, giving one sectioned pullout where trash and recyclables can be separated inside the same base cabinet. Because the top is machined to match both 34 and 50 quart bin profiles, the same cabinet opening concept can be reused on different jobs that may call for a larger bin set while keeping the same basic construction method. The bottom mount design keeps the load centered low in the cabinet, which can work well in busy kitchen runs where the pullout is cycled many times each day.
The CASBM175-34PF-GR waste pullout is specified to work for Inset and Full Overlay applications, so the same unit can be used across different face frame or frameless styles that share the correct opening. Four adjustable door mounted brackets tie the cabinet door to the pullout box and provide horizontal adjustment, which lets the installer move the door left or right to match surrounding gaps. Those same brackets also provide door tilt control, so the door can be tipped slightly to align top and bottom edges with neighboring fronts. Blum MOVENTO soft-close under mount slides contribute a smooth closing motion that draws the door back to a consistent position, supporting repeatable reveals once adjusted. In combination, the bracket adjustment and slide action help limit rework because the waste pullout door can be dialed in to match the cabinet run whether the design calls for inset faces or full overlay styling.
The Century Cascade 17-7/8 birch bottom mount waste pullout is made from Baltic Birch plywood, giving a solid wood box that visually matches many cabinet interiors.
The Blum 170lb rated MOVENTO soft-close under mount slides carry heavy bin loads while providing controlled, quiet closing that helps protect the cabinet face over time.
The unit top is routed to perfectly match 34 and 50 qt. bin profiles, so the grey 34 quart bins nest into shaped openings that limit shifting during operation.
The CASBM175-34PF-GR waste pullout works for Inset and Full Overlay applications, allowing one unit style across different cabinet designs sharing a suitable opening.
Four adjustable door mounted brackets provide horizontal adjustment and door tilt control, helping align the waste pullout door with adjacent cabinet fronts.
Floor mount brackets on the MOVENTO slides set the connection at the cabinet bottom, giving a clear mounting reference that supports consistent alignment.
The Century Cascade 17-7/8 birch bottom mount waste pullout with two grey 34 quart bins pairs Baltic Birch plywood construction with Blum 170lb rated MOVENTO soft-close under mount slides for a heavy-duty waste station. A routed top that matches 34 and 50 qt. bin profiles secures the bins in place, while four adjustable door mounted brackets support fine-tuned alignment in Inset and Full Overlay applications. For projects calling for a wood-box dual-bin pullout that integrates into a cabinet run, this CASBM175-34PF-GR configuration offers a defined solution.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CP34QTBN-GR Mfr# 34QTBN-GR | Century Components 34 quart Gray Trash Can, - 34QTBN-GR |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CP34BLD-GR Mfr# 34BLD-GR | Century Components 34 quart Gray Trash Can, - 34BLD-GR |