Century Edge 14-3/8" Birch Bottom Mount Waste Pullout with 2-34 Quart White Bins Soft-Close, EDGBM140-34PF

Century Edge Waste Pullout For Cabinet Trash

Century Edge waste pullout is a bottom mount trash pullout that organizes waste in a cabinet using a Baltic Birch frame and two 34 quart white bins, so a base cabinet can hold trash and recycling in a defined footprint. The unit is part of the Edge Series, which is presented as an economical choice, giving shops and installers a value-focused option when specifying pullout waste storage. The frame is made from Baltic Birch without edge-banding, creating a straightforward wood construction that suits project budgets where decorative edges are not required. The Baltic Birch is beautifully prefinished with a natural finish, so the pullout interior shows a clean, sealed wood surface that is ready for install in finished cabinetry. The trash pullout is built as a bottom mount design in the Bottom Mount Trash Pullouts class, so it fastens down to the cabinet floor rather than side walls.

Key Edge Series Details That Support Daily Use

• The frame is made from Baltic Birch, which provides a stable wood platform for the bins and keeps the pullout tracking square in the opening during regular use.
• The Baltic Birch construction is beautifully prefinished with a natural finish, so the wood surface is sealed and visually clean inside the cabinet for finished kitchen or bath projects.
• The trash pullout uses two 34 quart white bins, which dedicates separate containers for waste streams while keeping capacity consistent within a standard base cabinet space.
• Blum Tandem 100 lb slides support the pullout, so the loaded bins travel on a concealed undermount slide system rated for 100 pounds of dynamic load.
• Floor mounting brackets are part of the design, so the pullout is secured to the cabinet bottom for a bottom mount installation approach that aligns with the product class.
• Four adjustable door mounting brackets provide horizontal adjustment and door tilt control, so an attached cabinet door can be aligned to nearby fronts after mounting.

Bottom Mount Trash Pullout Installation And Setup

This bottom mount trash pullout uses floor mounting brackets, so the installer fastens the unit to the cabinet bottom and sets the position front-to-back within the opening. The Blum Tandem 100 lb slides are the motion hardware for the pullout, so slide alignment directly affects how smoothly the two 34 quart white bins travel in and out under load. The pullout uses four adjustable door mounting brackets, which provide horizontal adjustment and door tilt control to fine-tune a door front once it is attached to the frame. The frame height is identified as 14-3/8 inches, matching the Century Edge 14-3/8 inch naming, so the unit is sized for use in cabinets where that vertical dimension fits the interior space. The natural prefinished Baltic Birch frame installs as supplied, avoiding separate finishing steps in the shop or field.

Using The EDGBM140-34PF Waste Pullout On Projects

Where This Baltic Birch Waste Pullout Fits Best

This EDGBM140-34PF waste pullout is categorized under Kitchen & Bath Cabinet Accessories in Trash Pull-Outs, so it is oriented toward base cabinets in kitchens and bath vanities that need concealed waste storage. The product is part of the Bottom Mount Trash Pullouts class, meaning its load transfers to the cabinet floor through the floor mounting brackets, a layout that suits framed or frameless cabinets where side walls may be obstructed. The two 34 quart white bins define the volume that the system manages, so cabinet openings that can accept this Century Edge 14-3/8 inch frame height and bin depth can gain substantial pullout waste capacity. Because the unit is described as an economical choice within the Edge Series, it fits project scopes where cost control is important but a dedicated pullout waste solution is still required.

Details That Help Alignment, Motion, And Workflow

The Blum Tandem 100 lb slides are a central feature of this Century Edge waste pullout, since these slides carry the frame and two loaded 34 quart white bins on a concealed undermount track built for a 100 pound rating, giving the pullout a predictable feel under typical kitchen loads. The slides pair with the soft-close function described in the product name, so the pullout returns gently and seats the bins inside the cabinet rather than stopping abruptly at the front. Four adjustable door mounting brackets on the frame provide horizontal adjustment and door tilt control, which allows a mounted cabinet door to be shifted sideways or angled slightly so the finished front aligns with adjacent doors and drawers. The Baltic Birch frame is beautifully prefinished with a natural finish, so once the pullout is installed and aligned, the interior shows a uniform wood surface that visually matches higher-end cabinet interiors without additional site finishing work. The use of two 34 quart white bins within the same frame also standardizes how trash and recycling are handled, simplifying daily workflow around a single pullout location.

Common Questions About The Century Edge Waste Pullout

Select The EDGBM140-34PF For Cabinet Waste Pullouts

The Century Edge waste pullout EDGBM140-34PF combines a Baltic Birch frame, natural prefinish, two 34 quart white bins, Blum Tandem 100 lb slides, and bottom mount floor brackets into one trash pull-out solution. Four adjustable door mounting brackets with horizontal adjustment and door tilt control are built into the frame, so an applied cabinet door can be aligned to neighboring faces after mounting. For projects needing an economical Edge Series trash pull-out with soft-close function and defined 14-3/8 inch frame height, this bottom mount trash pullout provides a ready cabinet waste layout.