Century Edge 14-7/8" Birch Bottom Mount Waste Pullout with 2-34 Quart Grey Bins Soft-Close, EDGBM140-34PF-GR

Century Edge Waste Pullout For Cabinet Trash

Century Edge waste pullout is a bottom mount trash pullout designed to organize waste bins inside a cabinet. The unit is made from Baltic Birch, so the structure starts with a rigid wooden frame that supports the load of the waste bins in daily use. The Baltic Birch frame is beautifully prefinished with a natural finish, giving the interior of the cabinet a clean, finished look that matches higher-end casework. The pullout is fitted with Blum Tandem 100 lb slides, which support up to 100 pounds, allowing the installer to load two 34 quart gray bins without stressing the runners. These Blum Tandem slides also provide smooth motion, so the pullout operates quietly and predictably when opened and closed. The trash pullout uses a bottom mount layout, which fixes the frame to the cabinet floor and keeps the weight low for stable operation.

Key Details That Support Everyday Cabinet Use

• The pullout is made from Baltic Birch, which provides a stable, engineered wood frame that resists warping under the weight of trash bins during repeated cycles.
• The Baltic Birch frame is beautifully prefinished with a natural finish, giving the installer a ready-to-use surface that does not require additional finishing steps during cabinet installation.
• Blum Tandem 100 lb slides carry up to 100 pounds, allowing the two 34 quart gray bins to be used for trash and recycling while keeping slide performance consistent.
• The unit is a bottom mount trash pullout, so it fastens to the cabinet floor to keep the bins aligned and supported directly from the base of the cabinet.
• Four adjustable door mounting brackets provide horizontal adjustment and door tilt control, letting the installer fine-tune door position for an even reveal with adjacent fronts.
• The waste pullout uses two 34 quart gray bins, which give the cabinet user separate containers within one pullout for different waste streams.

Bottom Mount Fit, Slides, And Door Alignment

This bottom mount trash pullout is designed to sit on and fasten to the cabinet floor, so the load of the two 34 quart gray bins transfers straight down into the cabinet base for a solid feel. The Blum Tandem 100 lb slides support the pullout from both sides, guiding the Baltic Birch frame in and out under load while holding alignment to the cabinet opening. Because the frame is prefinished with a natural finish, it can be installed as-delivered inside a finished cabinet without extra prep time. Four adjustable door mounting brackets connect the cabinet door to the pullout, and those brackets provide horizontal adjustment to shift the door left or right after mounting. The same brackets provide door tilt control, so the installer can angle the top or bottom of the door to match surrounding fronts.

Where This Trash Pullout Works And Why Details Matter

Bottom Mount Trash Pullout For Cabinet Interiors

This bottom mount trash pullout is part of the Century Edge Series and fits into a cabinet as a floor-mounted waste solution. The Baltic Birch construction provides a rigid platform for the two 34 quart gray bins, which sit inside the frame so they travel with the slide movement. Because the frame is beautifully prefinished with a natural finish, it visually upgrades the interior of kitchen or bath cabinets where the pullout will be opened frequently. The Blum Tandem 100 lb slides mount to the frame and cabinet, so the trash pullout moves fully on guided runners instead of scraping the cabinet floor. With the bottom mount layout, the weight of the waste loads stays low in the cabinet, supporting a stable pull motion even when the bins are full.

Adjustment And Components That Reduce Rework

The Blum Tandem 100 lb slides on this Century Components waste pullout provide a defined slide path and load rating, which helps keep the frame running parallel to the cabinet sides over time. That precise slide guidance reduces the likelihood of racking that can cause rubbing against the cabinet opening. Four adjustable door mounting brackets connect the cabinet door to the pullout frame, and those brackets provide horizontal adjustment that lets the installer move the door into alignment with neighboring fronts without remounting the frame. The same brackets also provide door tilt control, which means the door angle can be tuned at the top or bottom to match surrounding reveals. The two 34 quart gray bins give the end user a consistent bin size to work around, which simplifies planning for waste and recycling capacity within the available cabinet width.

Common Questions About This Century Edge Pullout

Select This Waste Pullout For Cabinet Projects

The Century Edge waste pullout from Century Components is a bottom mount trash pullout built from Baltic Birch and prefinished with a natural finish, so it fits cleanly into cabinet interiors. Blum Tandem 100 lb slides support the frame and two 34 quart gray bins, giving the unit defined load capacity for everyday trash and recycling use. Four adjustable door mounting brackets provide horizontal adjustment and door tilt control, which helps bring the attached cabinet door into line with surrounding fronts. For projects that call for a floor-mounted waste solution with an engineered wood frame and guided slides, this Century Edge waste pullout offers a defined set of features ready to integrate into kitchen or bath cabinetry.