Century Edge 17-3/8" Birch Bottom Mount Waste Pullout with 2-34 Quart White Bins Soft-Close, EDGBM170-34PF

A Double-Bin Waste Pullout Sized for a Standard 18-Inch Base Cabinet

This Century Edge waste pullout fits a birch carriage with two 34 quart white bins onto a full-extension, soft-close bottom-mount slide system, putting separate waste and recycling bins behind a single cabinet door.

Key Features

• Two 34 quart white bins included ship ready to use for waste and recycling separation.
• Soft-close, full-extension bottom-mount slides bring both bins fully forward and ease them back without slamming.
• Prefinished birch carriage at 17-3/8 inches wide fits a standard 18-inch base cabinet opening.
• Door-mount compatible so the unit rolls out when the cabinet door opens.
• 100 pound weight capacity handles two fully loaded bins without issue.
• 22-1/2 inch depth and 23-5/8 inch height suit a standard base cabinet box.

Two Bins, One Cabinet, One Motion

Pulling one door handle brings both bins into the open at the same time, so a cook or family member can drop trash in one bin and recycling in the other without opening two separate doors or digging through a cabinet. The full-extension slides mean the back of each bin clears the cabinet face, so nothing gets lost at the bottom. The 34 quart size on each bin is large enough for a kitchen's daily volume without requiring an oversized cabinet opening.

Carriage Construction and Motion

The carriage is prefinished birch, which means the wood arrives ready to install inside a finished or semi-finished cabinet without additional staining or sealing. The bottom-mount slide configuration keeps the hardware underneath the bins so the top of each bin stays open and clear for easy use. Soft-close slides control the final travel in both directions, so a loaded pullout does not bang the back of the cabinet or slam forward when the door is opened hard. The carriage is door-mount ready, and attaching it to the cabinet door converts the unit to a door-pull operation.

Where This Unit Fits

This pullout is a natural fit for a kitchen remodel or new cabinet build where an 18-inch base cabinet is being dedicated to waste. It also works well in a garage cabinet run, a mudroom, or a utility area where two-stream sorting is needed in a compact footprint. Cabinet shops specifying complete kitchens can pair this unit with a door-mount bracket to deliver a finished, integrated waste center rather than a freestanding bin. Confirm the cabinet opening against the 17-3/8 inch carriage width before ordering, and verify the interior depth accommodates the 22-1/2 inch depth of the unit.

Common Questions

Two-Stream Sorting Behind One Door

Choose this pullout to put separate waste and recycling bins in a single 18-inch base cabinet, with soft-close slides and a prefinished birch carriage that installs cleanly into a finished kitchen.