Century Edge 11-3/8" Birch Bottom Mount Waste Pullout with 2-34 Quart Grey Bins Soft-Close, EDGBM170-34PF-GR

Century Edge Waste Pullout For Cabinet Trash

Century Edge waste pullout gives a bottom mount trash solution built around Baltic Birch construction, so the pullout structure supports regular kitchen cabinet use while presenting a clean wood look that works well in cabinet interiors. This unit uses Blum Tandem 100 lb slides, which carry heavy trash loads smoothly so the pullout remains functional even when both bins are full. The soft-close action on these slides pulls the waste unit closed in a controlled motion, which helps keep doors aligned and reduces slamming in busy kitchens. Two 34 quart gray bins provide defined waste capacity, so installers can plan cabinet space knowing the volume available for trash or recycling. The pullout is beautifully prefinished with a natural finish on the Baltic Birch, which means the wood surfaces are sealed for a finished appearance that fits into higher-end cabinet runs.

Key Edge Series Details That Support Daily Use

• The unit is made from Baltic Birch without edge-banding, which creates a strong, stable platform that holds fasteners well and resists rack during repeated cycles in a kitchen or bath cabinet.
• Blum Tandem 100 lb slides support the waste pullout, so the assembly handles demanding loads from full 34 quart bins while maintaining consistent slide action over time.
• Soft-close functionality built into the slides brings the pullout gently to a close, which helps keep doors quieter in everyday use and supports a controlled, professional cabinet feel.
• Two gray 34 quart bins define the waste capacity, allowing straightforward planning for trash and recycling segregation inside a single bottom mount cabinet location.
• The Baltic Birch is beautifully prefinished with a natural finish, so the installed unit delivers a finished interior appearance without additional finishing steps on site.
• Floor mounting brackets support bottom mount installation, tying the pullout solidly to the cabinet floor so loads from the bins transfer directly into the cabinet structure.

Bottom Mount Trash Pullout Installation Details

This Century Edge bottom mount trash pullout uses floor mounting brackets, so the installer secures the unit directly to the cabinet floor for a solid base that carries the weight of two 34 quart bins. Blum Tandem 100 lb slides integrate into this bottom mount layout, allowing the pullout to extend smoothly from the cabinet while the slide hardware stays protected along the sides and undercarriage. Four adjustable door mounting brackets connect the cabinet door to the waste pullout, which provides horizontal adjustment and door tilt control so the door face can be aligned with adjacent fronts after the unit is fastened. The Baltic Birch construction offers a stable platform for these mounting points, which supports precise alignment during installation work.

Using The EDGBM170-34PF-GR Waste System

Where This Bottom Mount Trash Pullout Fits

The EDGBM170-34PF-GR waste system is part of the Century Edge Series in the bottom mount trash pullouts class, so it is designed to mount on the cabinet floor rather than the sides. Two 34 quart gray bins ride in the Baltic Birch frame, which organizes waste storage inside a single cabinet bay and defines the amount of trash or recycling capacity available. The beautifully prefinished natural finish on the Baltic Birch lets this pullout sit comfortably in kitchen and bath cabinet interiors where exposed wood components are visible when the door is opened. The soft-close Blum Tandem 100 lb slides carry the bins smoothly, so users can open the cabinet door and access the waste containers without abrupt movement, even when the bins are heavily loaded.

Details That Improve Alignment And Workflow

The Century Edge waste pullout uses four adjustable door mounting brackets, and these provide horizontal adjustment plus door tilt control so the mounted door can be tuned to line up with surrounding fronts after the slides and floor brackets are secured. This adjustment capability allows installers to correct for small cabinet or door variances while still using the same EDGBM170-34PF-GR unit, which helps reduce rework when setting reveals. Blum Tandem 100 lb slides contribute soft-close performance, so doors attached to the pullout close with a controlled pull-in that supports consistent gaps along the cabinet run. The Baltic Birch frame, made without edge-banding and prefinished with a natural finish, gives a rigid connection surface for the door brackets and slides, which helps the adjustments hold during repeated daily waste bin use.

Common Questions About This Waste Pullout

Select This Waste Pullout For Cabinet Projects

The Century Edge waste pullout EDGBM170-34PF-GR combines Baltic Birch construction, Blum Tandem 100 lb soft-close slides, and two 34 quart gray bins, giving a defined bottom mount trash solution that suits kitchen and bath cabinet projects needing a prefinished interior waste system. Floor mounting brackets and four adjustable door mounting brackets offer a clear installation path, from anchoring on the cabinet floor to tuning door position with horizontal and tilt adjustments. For projects where a bottom mount trash pullout with known bin capacity and soft-close slide performance is required, this Century Components Edge Series unit from Wurth Baer Supply offers a focused option.