Century Cascade plywood base cabinet pullout gives a base cabinet a dedicated, pull-out storage zone using a 5-7/8 inch wide, 3-shelf organizer. This organizer is made from Baltic Birch plywood with edge banding, which provides a sturdy wood construction that suits cabinet interiors. The unit is beautifully prefinished with a natural finish and a 60 sheen conversion varnish, so it presents a smooth, consistent surface that works well in a finished kitchen. The open top design on the upper shelf provides excellent visibility and easy access, which helps installers and users quickly see and reach items. Designed to be put in its own cabinet, this pull-out organizer creates a defined storage area in a base run. As a base cabinetry organizer and filler, it fits into the layout where a narrow pull-out storage solution is needed.
This Century Cascade 3-shelf pull-out organizer uses Blum 100 lb rated soft-close undermount slides with floor mount brackets, so the installer works with a familiar, concealed slide platform anchored at the cabinet floor. The floor mount brackets give a defined mounting point at the base, which aligns the slide set with the cabinet opening during installation. With top and bottom shelves fixed, the unit maintains rigidity while the cabinet builder adjusts only the middle shelf to suit container heights. The open top shelf design leaves the front upper area unobstructed, which helps during fitting, final adjustment, and later access by the homeowner.
The Century Components CASBO55PF pullout organizer is designed to be put in its own base cabinet, so it serves as a dedicated pull-out section within a kitchen layout. Its 5-7/8 inch width suits narrow base cabinet openings where a full-width drawer bank is not planned, giving the designer a way to use that space for organized storage. As a base cabinetry organizer and filler, it works in kitchen and bath cabinet runs that call for a tall, vertical pull-out section. The three-shelf configuration allows smaller containers on the adjustable middle shelf while the fixed top and bottom shelves hold items that benefit from stable positions. Because the top area has an open design, it functions well for spice storage or other items that benefit from quick visual identification in a pull-out format.
The Baltic Birch plywood with edge banding provides a consistent box structure, which helps kitchen builders install a square, true-running pull-out. The natural prefinished surface with 60 sheen conversion varnish removes finishing steps, so the organizer can be installed after cabinet casework without additional coating work. Blum 100 lb rated soft-close undermount slides contribute a silky smooth action that supports repeatable performance under typical kitchen loads, and the soft-close function brings the pull-out to a controlled close for everyday use. Floor mount brackets simplify the workflow by giving a stable base reference, reducing layout complexity at the cabinet sides. With the top and bottom shelves fixed for stability and the middle shelf adjustable, installers can fine-tune interior spacing while maintaining overall rigidity of the pull-out assembly over time.
The Century Cascade plywood base cabinet pullout is made from Baltic Birch plywood with edge banding, giving the organizer a stable wood structure that aligns well with typical cabinet interiors.
The CASBO55PF pullout organizer provides three shelves, with the top and bottom shelves fixed and the middle shelf adjustable to match the height of stored items.
This Century Components CASBO55PF pullout organizer uses Blum 100 lb rated soft-close undermount slides, giving the pull-out concealed support and a smooth, controlled closing motion.
The pull-out organizer is supported by Blum undermount slides with floor mount brackets, so the slide system is anchored to the cabinet floor for straightforward positioning.
The Century Cascade plywood base cabinet pullout is beautifully prefinished with a natural finish using a 60 sheen conversion varnish, providing a smooth, ready-to-use surface.
The CASBO55PF pullout organizer is designed to be put in its own base cabinet, serving as a dedicated pull-out storage section in a kitchen or bath cabinet run.
The Century Cascade plywood base cabinet pullout uses Baltic Birch plywood, a natural prefinished surface, and a 5-7/8 inch wide, 3-shelf layout to deliver organized storage in a narrow base cabinet opening. Blum 100 lb rated soft-close undermount slides with floor mount brackets provide the concealed support and smooth action expected in modern cabinetry. For projects that call for a dedicated, pull-out base cabinet section using the Century Components CASBO55PF pullout organizer, this design offers a defined, functional storage solution within the cabinet run.
Sold In: 1 Each