Century Components Cascade Series base cabinet pullout organizer is a floor-mounted storage unit that brings items out of a 10-3/8 inch wide base cabinet opening, which helps keep lower cabinet contents accessible without reaching deep into the cabinet. The organizer uses Blum TANDEM 100 lb soft-close, full-extension slides, so the pullout travels the full depth of the slide and then eases shut at the end of travel, which reduces slamming in everyday use. The adjustable middle shelf can be set at different heights within the organizer, which lets the installer tailor shelf spacing to the mix of tall and short items stored in the cabinet. A 140-sheen conversion finish is applied to the birch components, so the wooden surfaces have a sealed, finished coating that supports a consistent appearance inside the cabinet. The product is identified by manufacturer part number CASBO100PF, which ties this specific configuration to job documentation or reorders.
This Cascade Series base cabinet pullout uses floor mount brackets, so the installer positions the organizer directly on the base cabinet floor, which gives a clear reference plane for locating the unit front to back. The Blum TANDEM 100 lb soft-close, full-extension slides define the travel path, so once the brackets and slides are secured in place, the organizer tracks along that fixed path into and out of the opening. The adjustable middle shelf can then be set at the preferred height after the pullout is mounted, which allows the installer to fine-tune shelf spacing with the organizer operating in its actual travel path. The 140-sheen conversion finish on the birch surfaces remains exposed after setup, so the finished wood appearance continues across the visible faces when the pullout is extended.
This Century Components Cascade Series 10-3/8 inch wide base cabinet pullout organizer is part of a base cabinetry organizers and fillers product class, so it is intended to occupy space inside a base cabinet to organize stored items. The floor mount brackets position the organizer on the cabinet floor, which lets the pullout act as a structured insert rather than loose shelving. With Blum TANDEM 100 lb soft-close, full-extension slides supporting the unit, the organizer travels outward so stored contents can be seen and accessed along the full slide length, which is useful when reaching items at the back of a base cabinet. The soft-close feature of the Blum TANDEM slides manages the last part of the closing stroke, so the organizer retracts into the cabinet in a controlled way that suits repeated opening and closing in kitchen and bath cabinet applications.
The combination of floor mount brackets and Blum TANDEM 100 lb soft-close, full-extension slides sets a defined geometry for the Cascade Series organizer, which supports repeatable alignment between the pullout and the cabinet opening when installed to the cabinet floor. The adjustable middle shelf feature allows the shelf position to be changed after the organizer is mounted, which simplifies dialing in usable vertical clearance around stored items without altering the basic pullout structure. Because the product uses a 140-sheen conversion finish on its birch components, the wood surfaces present a consistent sheen across all finished faces, which maintains a uniform look as the organizer moves from fully closed to fully extended positions. The manufacturer part number CASBO100PF ties these combined characteristics - width, slide type, finish, and shelf adjustability - to a specific model, which supports specifying the same organizer configuration wherever this pullout behavior and appearance are required in a project.
The CASBO100PF organizer is classified under base cabinetry organizers and fillers, so it is intended to organize storage space inside a base cabinet opening.
The Blum TANDEM 100 lb soft-close, full-extension slides let the pullout travel the slide length and then slow the closing motion, which supports smooth, controlled operation under typical cabinet loads.
The floor mount brackets are designed to secure the organizer to the cabinet floor, which creates a stable mounting base and defines the pullout position inside the base cabinet.
The adjustable middle shelf lets the shelf height be changed within the organizer, which helps match shelf spacing to the height of stored items in the cabinet.
The 140-sheen conversion finish creates a finished coating on the birch components, which supports a consistent interior surface appearance as the pullout moves in and out.
The 10-3/8 inch width describes the size of the Cascade Series base cabinet pullout organizer, which helps align the unit with an appropriately sized base cabinet opening.
The Century Components Cascade Series 10-3/8 inch wide base cabinet pullout organizer with Blum TANDEM 100 lb soft-close, full-extension slides, adjustable middle shelf, and 140-sheen conversion finish provides a defined storage insert for base cabinets, so a project can use a known organizer layout instead of ad-hoc shelving. At Wurth Baer Supply, this CASBO100PF configuration is available as a single, identified component, which supports specifying this exact pullout when planning cabinet interiors that benefit from full-extension access and an adjustable shelf inside a finished birch organizer.
Sold In: 1 Each