Riptide drawer sides use clear rubberwood to give drawer projects a consistent material across every blank, which supports predictable machining and finishing on production runs. Each drawer side is 0.625 inch thick, so shop settings can be standardized for this thickness during milling and assembly. The 5.875 inch height provides a fixed drawer side dimension that helps maintain uniform drawer box proportions across a job. A 36.5 inch length on each piece offers ample stock for cutting typical drawer widths while limiting waste compared to longer strips. The rubberwood is UV finished, so the surface arrives with a cured coating that is ready for drawer interior use without additional finishing steps. This product is sold in pallet quantities only, which suits cabinet shops or manufacturers planning higher-volume drawer construction.
The drawer sides measure 0.625 inch in thickness, which lets saws, routers, and joinery tools be set specifically for that dimension and reused across multiple runs. With a 5.875 inch height, these blanks define the side depth of the drawer, so layout and hardware positioning can be based on this fixed measurement. Each piece is 36.5 inches long, giving a predictable starting length when planning cut lists for several drawer widths from the same stick. The rubberwood drawer sides are UV finished, providing a factory-applied coating that is ready for interior drawer use and supports a cleaner environment during assembly by limiting on-site finishing work.
Riptide drawer side blanks belong to the drawer side blanks class, so they are suited to building drawer boxes as part of a broader drawer construction system. The clear rubberwood material works in woodworking environments where a solid wood drawer side is preferred for interior cabinet drawers or similar storage applications. With 0.625 inch thickness and 5.875 inch height, these pieces define a specific drawer side profile that can be repeated across kitchen, bath, or shop cabinetry using the same dimensions. The 36.5 inch length supports cutting multiple drawer sides for smaller to mid-size drawers from each blank, which fits production workflows in cabinet shops that standardize drawer widths. Because the rubberwood is UV finished, the material is particularly well suited where finished interior drawer surfaces are part of the project requirement.
The 0.625 inch thickness of these Riptide drawer sides simplifies setup because jigs, guides, and cutting depths can all be calibrated once to that measurement and held through the job. A 5.875 inch height means installers and builders can design drawer openings and slides knowing the side dimension is consistent, which helps align clearances and drawer reveals. The 36.5 inch length per blank supports efficient layout, enabling multiple shorter drawer sides to be cut in sequence without constant changeover to different stock sizes. Clear rubberwood construction means the substrate presents a uniform grain and density along its length, helping bits and blades track more predictably during machining. The UV finished surface adds a cured coating at the factory, which reduces on-site finishing stages and supports cleaner assembly areas when drawers enter final installation.
Riptide drawer sides are made of clear rubberwood, which provides a consistent wood substrate for machining and finishing in drawer construction work.
These drawer side blanks are 0.625 inch thick, allowing shop tools and joinery setups to be calibrated to a single drawer side thickness across a project.
Each Riptide drawer side is 5.875 inches high, defining a consistent drawer side depth that can be repeated across multiple drawer boxes in a job.
The Riptide rubberwood drawer sides are 36.5 inches long, giving a fixed starting length for cutting various drawer widths from the same piece.
These drawer sides are UV finished, so the rubberwood surfaces arrive with a cured coating suited to interior drawer box applications.
These Riptide drawer sides are sold in pallet quantities only, aligning with production environments that build drawers in higher volumes.
Riptide drawer sides combine clear rubberwood, a UV finished surface, and fixed dimensions of 0.625 inch thickness, 5.875 inch height, and 36.5 inch length to support repeatable drawer construction. Sold in pallet quantities only, this drawer side blank fits shops planning multiple drawer boxes around the same material profile and finish. For drawer projects that benefit from standardized drawer side dimensions and a ready-to-use interior surface, these Riptide drawer sides provide a defined format for planning cuts, tooling setups, and assembly steps.
Sold In: 504 Each