Riptide drawer sides are clear rubberwood drawer side blanks that form the vertical walls of a drawer, giving you a consistent material to build from in cabinet and woodworking projects. These drawer sides have a 0.625 inch thickness, so they match 5/8 inch drawer construction layouts where that wall thickness is part of your design and joinery setup. Each side measures 10.25 inches high, providing a tall drawer wall that supports deeper storage spaces where increased side height is part of the plan. The 36.5 inch length gives you a long blank that can be cut down to multiple sides or to specific drawer widths, which helps streamline cutting patterns around a common length. Made of rubberwood, these sides offer a uniform wood species to coordinate with other rubberwood components in the shop. A UV finished surface is applied to the rubberwood, so the drawer sides start with a finished face that does not require separate finishing steps before use.
These Riptide drawer sides use a 0.625 inch thickness, so all machining for grooves and joinery can be planned around a 5/8 inch side dimension from the start. With a 10.25 inch height, you have ample material to set drawer box depth without adding build-up strips or switching to different stock sizes. The 36.5 inch length lets you size pieces for different cabinet openings from a common blank, which supports repeatable cutting setups. Because the drawer sides are made of rubberwood with a UV finished face, they arrive as uniform wood components with a finished surface that is ready for layout, cutting, and assembly steps.
Riptide drawer sides are part of a drawer construction system, serving as drawer side blanks that are cut and machined into finished drawer walls. As drawer side blanks in the Drawer Construction Systems category, they are intended for building or assembling drawer boxes in woodworking and cabinet-related work. The clear rubberwood material means these sides fit projects where a rubberwood drawer interior or drawer wall is desired, so the sides match other rubberwood components visually. The 10.25 inch height supports applications that need higher drawer sides, such as deeper storage drawers that benefit from added wall height inside the cabinet. Because each blank is 36.5 inches long, they can be used in jobs where multiple drawer widths are cut from one length, which is common in shop environments handling a run of cabinets with varying openings.
The 0.625 inch thickness of these Riptide drawer sides sets a predictable dimension for every drawer side in a project, which helps keep joinery, groove placement, and clearances consistent from drawer to drawer. This 5/8 inch side thickness also supports planning around hardware or layouts designed with that dimension in mind. The 36.5 inch length gives room to cut several shorter sides from each blank, which supports efficient material use when setting up repeatable cuts for different drawer widths. With a 10.25 inch height, you have a drawer side blank that can be used for tall drawers or trimmed for shorter ones while still starting from the same stock size. The UV finished surface on the rubberwood means the faces of the drawer sides already have a completed finish layer, so machining and assembly can focus on joinery and fit while relying on a finished appearance on the surfaces produced from the blanks.
The Riptide drawer sides are 0.625 inch thick, 10.25 inches high, and 36.5 inches long, so layouts and cuts can be based on a consistent 5/8 inch side thickness and tall side height.
The Riptide drawer sides are made of rubberwood, giving you a single wood species for drawer walls where a rubberwood interior or drawer structure is preferred.
The UV finished rubberwood surface provides a prefinished face on the drawer sides, so work can focus on cutting and machining while relying on a completed surface appearance.
The Riptide rubberwood parts are classified as drawer side blanks in a drawer construction system, meaning they are intended to be cut and machined into drawer box sides.
The 10.25 inch height provides material for taller drawer sides, allowing layouts that require deeper storage or higher side walls to be built from a single stock size.
The 0.625 inch thickness sets a 5/8 inch drawer side dimension, so joinery details and groove locations can be planned around a consistent wall thickness across all drawers.
Riptide drawer sides bring a 0.625 inch thick, 10.25 inch high, 36.5 inch long rubberwood blank with a UV finished surface into drawer box construction work. When a project calls for drawer side blanks in rubberwood and a 5/8 inch wall layout, these Riptide components align directly with that requirement. The consistent dimensions and finished surface allow shop time to center on machining, cutting, and assembly steps around a known drawer side profile. For drawer construction systems built on rubberwood with these dimensions, selecting this Riptide part number 01-0000000977 keeps materials aligned to that standard.
Sold In: 252 Each