Riptide drawer sides are clear rubberwood drawer side blanks designed for building drawer boxes within a drawer construction system. Each blank is 0.625 inch thick, so it matches a 5/8 inch side specification many shops standardize on for consistent layouts and machining across projects. The 10.25 inch height gives generous side depth for medium to taller drawer applications, helping maintain storage capacity without custom ripping from wider stock. At 47.25 inch length, each piece supports a wide range of drawer widths from small to large while minimizing offcut loss when optimized in the cut list. Made of rubberwood, these sides provide a uniform, workable material that behaves predictably under common shop processes like cutting and boring. The UV finished surface arrives prefinished, so drawer interiors do not need separate finishing passes, saving booth time and reducing finishing steps in production workflows.
These drawer side blanks measure 0.625 inch by 10.25 inch by 47.25 inch, so layout and machining can be planned around fixed, repeatable dimensions. The 0.625 inch thickness works directly into joinery settings that assume a 5/8 inch side, reducing changes in tooling offsets between projects using the same material. With a 10.25 inch height, each blank supports deeper drawer designs without adding extra milling steps to build up height from narrower stock. The 47.25 inch overall length offers enough run to handle wider cabinet drawer widths while still allowing optimized cutting patterns to serve narrower drawers from the same piece. These fixed measurements help programmers, CNC operators, and bench installers align their workflow around a predictable drawer side component.
These Riptide rubberwood drawer side blanks are part of a drawer construction system, so they are intended as the vertical sides of drawer boxes in cabinet and casework projects. The 47.25 inch length fits common cabinet drawer widths when cut to size, allowing one blank to serve single or multiple drawers depending on design. With 10.25 inch height, these sides accommodate drawers that need more internal depth, such as storage or utility drawers, yet still come from a single dimension that is easy to plan in cut lists. Being 0.625 inch thick, they suit builds where a 5/8 inch side is specified for strength, proportion, or to coordinate with existing hardware and clearances. The clear rubberwood construction makes these blanks suitable where a consistent, uniform drawer interior appearance is desired once the UV finished faces are exposed in the completed drawer.
The fixed 0.625 inch thickness on each drawer side blank gives a stable reference for joinery, so groove depths, dado locations, and hardware clearances can be kept consistent throughout a run of drawers. The 10.25 inch height provides room to position bottom grooves and any additional machining without crowding the top edge, which helps maintain uniform reveal and storage depth across multiple cabinets. At 47.25 inch length, these blanks support efficient nesting strategies, allowing operators to plan repetitive cuts that keep edges straight and surfaces square from piece to piece. The rubberwood material offers a dependable substrate for clean cuts and clean bored holes, which helps drawer hardware perform as intended. The UV finished surface reduces the need for additional finishing operations on interior faces, which supports faster turnarounds and repeatable interior appearance across large projects. Sold in pallet quantities of 252 pieces, this format supports shops running repeated drawer box builds where the same drawer side specification is used across many cabinets.
The drawer sides measure 0.625 inch thick, 10.25 inch high, and 47.25 inch long, so layouts and cut lists can be built around these fixed dimensions for consistent drawer box sizing.
The Riptide drawer sides are made of rubberwood, giving a uniform, machinable material that suits common shop processes such as cutting, grooving, and boring for drawer construction.
The 0.625 inch thickness matches a 5/8 inch drawer side specification, which allows joinery, clearances, and hardware planning to follow a standard thickness throughout a project.
The UV finished surface means the drawer sides arrive prefinished, so interior faces do not need separate finishing steps, helping streamline production and keep drawer interiors consistent.
The 47.25 inch length gives enough run for a wide range of drawer widths, allowing efficient nesting in cut lists and potential use of offcuts for smaller drawers where dimensions permit.
These Riptide drawer sides are sold in pallet quantities of 252 pieces, supporting higher-volume drawer box production that uses the same drawer side specification repeatedly.
Riptide rubberwood drawer side blanks at 0.625 inch by 10.25 inch by 47.25 inch give shops a consistent component for drawer box construction. The UV finished surface supports clean drawer interiors without separate interior finishing stages. With pallet quantities of 252 pieces, this format suits operations planning repeated drawer production around a stable, 5/8 inch thick side standard. For projects built on drawer construction systems and drawer blanks, these Riptide drawer sides align material, dimensions, and surface treatment to support organized, repeatable drawer builds.
Sold In: 252 Each