Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rinco-Matic Gola 19 is a flat intermediate profile in Matte Inox Champagne, supplied in a 105-1/8 inch stock length for handleless cabinet installations requiring a continuous grip between two fronts.
A handleless Gola elevation is built from profiles assigned to specific positions in the cabinet run, not from one universal section used everywhere. The intermediate profile occupies every horizontal joint between two fronts: above the front it closes the gap, and below it the shaped recess becomes the grip. On a bank of three drawers, the intermediate appears at both horizontal lines between them. At the top of the same bank, where a front has nothing above it, a different section takes over. That position requires the upper-side profile, which is a separate item ordered alongside this one for a complete run.
Matte Inox Champagne sits between silver and warm gold in tone, reading closer to brushed stainless but with a slightly softer, champagne cast and no high gloss. That quality makes it a natural fit for kitchens mixing warm metallics with cooler hardware finishes, where a flat black or a bright chrome would pull too hard in one direction. The flat profile form keeps the shadow gap at the front edge clean rather than introducing a curved or angled reveal.
The profile ships in a single 105-1/8 inch length, just over eight and a half feet. Fabricators cut it to the cabinet run. Because of its length it ships as an oversized item rather than in a standard box, which is worth accounting for in lead-time and receiving. End caps, inside corners, and clips for the Gola 19 system are separate items with their own part numbers and are not supplied with the profile.
The intermediate profile is shaped to sit between two fronts, giving a grip to the lower front and closing the joint above. The upper-side profile is shaped for the top of the run, where there is no front above it. The two are not interchangeable.
One per horizontal joint between two fronts. A run with three drawer fronts stacked vertically needs two intermediate profiles and one upper-side profile at the top.
No. Caps, clips, and corners for the Gola 19 system are separate items specified to the profile series.
Matte Inox Champagne has a warmer cast than standard brushed stainless. Whether it reads as a match alongside other hardware finishes depends on the specific products. No cross-brand finish match is guaranteed.
Specify this profile at every horizontal joint in a Gola 19 run where the finish needs to balance warm and cool tones without committing to either extreme.
Sold In: 1 Each